# efoils – Electric Hydrofoil Surfboards **URL:** https://foil.zone/c/efoils-electric-hydrofoil-surfboards/40.md [Latest](https://foil.zone/latest.md) · [Categories](https://foil.zone/categories.md) · [Tags](https://foil.zone/tags.md) --- ## [About the efoils – Electric Hydrofoil Surfboards category](https://foil.zone/t/about-the-efoils-electric-hydrofoil-surfboards-category/10325)
**Author:** [@pacificmeister](https://foil.zone/u/pacificmeister)\ **Replies:** 2\ **Last updated:** [September 20, 2021, 3:25am UTC](https://foil.zone/t/about-the-efoils-electric-hydrofoil-surfboards-category/10325 "2021-09-20T03:25:22Z")
--- ## [Wiring a flycolor 160a to a bec to the flipsky receiver connector](https://foil.zone/t/wiring-a-flycolor-160a-to-a-bec-to-the-flipsky-receiver-connector/27219)
**Author:** [@ksrf](https://foil.zone/u/ksrf)\ **Replies:** 0\ **Last updated:** [September 21, 2026, 5:32pm UTC](https://foil.zone/t/wiring-a-flycolor-160a-to-a-bec-to-the-flipsky-receiver-connector/27219 "2026-09-21T17:32:31Z")
I had saltwater in my box and the flipsky receiver and the bec are being replaced. I did not do the original build It is a bec 12s pro. One of the wires to the bec is missing (the input) and I found a random red wire la… --- ## [Jet drive based on Gong V3 components, LMT motor and Aerofoils impeller](https://foil.zone/t/jet-drive-based-on-gong-v3-components-lmt-motor-and-aerofoils-impeller/27166)
**Author:** [@jozagulikoza](https://foil.zone/u/jozagulikoza)\ **Replies:** 26\ **Last updated:** [September 14, 2026, 5:56pm UTC](https://foil.zone/t/jet-drive-based-on-gong-v3-components-lmt-motor-and-aerofoils-impeller/27166 "2026-09-14T17:56:42Z")
I am slowly working on jet drive since efoil would potentially be used also by my son and grandson. First I wanted to go with JetWave motor and impeller like Kian, but like he wrote, JetWave would only sell to those… --- ## [Flipsky vx5 remote](https://foil.zone/t/flipsky-vx5-remote/24220)
**Author:** [@windego](https://foil.zone/u/windego)\ **Replies:** 194\ **Last updated:** [September 9, 2026, 8:49pm UTC](https://foil.zone/t/flipsky-vx5-remote/24220 "2026-09-09T20:49:50Z")
Kinda spendy! --- ## [Flipsky ESC Tool speed limit problem](https://foil.zone/t/flipsky-esc-tool-speed-limit-problem/27118)
**Author:** [@jerryminne](https://foil.zone/u/jerryminne)\ **Replies:** 12\ **Last updated:** [September 7, 2026, 3:10pm UTC](https://foil.zone/t/flipsky-esc-tool-speed-limit-problem/27118 "2026-09-07T15:10:44Z")
I bought ft85cs esc. there’s problem with speed. I tried 13s and 20s battery the speed almost the same. I already move the erpm to the top(250000). what else the setting affect rpm or how to increase rpm? --- ## [Efoil Singapore](https://foil.zone/t/efoil-singapore/19417)
**Author:** [@MaMaMia9988](https://foil.zone/u/MaMaMia9988)\ **Replies:** 1\ **Last updated:** [September 6, 2026, 4:24pm UTC](https://foil.zone/t/efoil-singapore/19417 "2026-09-06T16:24:59Z")
Hi there! anyone e-Foiling in Singapore? lets connect. --- ## [Integrated Efoil Mast and Board DIY Build - Australia](https://foil.zone/t/integrated-efoil-mast-and-board-diy-build-australia/27113)
**Author:** [@kdiddypops](https://foil.zone/u/kdiddypops)\ **Replies:** 0\ **Last updated:** [September 2, 2026, 9:38am UTC](https://foil.zone/t/integrated-efoil-mast-and-board-diy-build-australia/27113 "2026-09-02T09:38:24Z")
Hi Foilzone! Long time lurker, first time poster from Australia. I’ve committed to building an efoil. I’ve long been fascinated by the sport, from the engineering details to the feeling of flight. I tried a lesson a fe… --- ## [Hiorth brothers returns - waist mounted foil assist build - two approaches](https://foil.zone/t/hiorth-brothers-returns-waist-mounted-foil-assist-build-two-approaches/26597)
**Author:** [@Hiorth](https://foil.zone/u/Hiorth)\ **Replies:** 18\ **Last updated:** [September 1, 2026, 5:16pm UTC](https://foil.zone/t/hiorth-brothers-returns-waist-mounted-foil-assist-build-two-approaches/26597 "2026-09-01T17:16:53Z")
Me and my brother was quite active on efoil.builders some years ago, building two regular e-foils. Now we are building wearable foil assists for ourself, with two somewhat different approaches. One Pack raft (primary … --- ## [Please advice for foil assisted pump](https://foil.zone/t/please-advice-for-foil-assisted-pump/27075)
**Author:** [@MacIak](https://foil.zone/u/MacIak)\ **Replies:** 4\ **Last updated:** [August 28, 2026, 6:13pm UTC](https://foil.zone/t/please-advice-for-foil-assisted-pump/27075 "2026-08-28T18:13:50Z")
Hi. So i’m playing with the thought of getting a Waydoo foil assist. Intention is to learn to pop out in mid-water, pump, catch wake from boats etc. Eventually take it to sea and use it on waves. I have a 75cm alu mast … --- ## [Waydoo Launching Foil Assist Product](https://foil.zone/t/waydoo-launching-foil-assist-product/25759)
**Author:** [@seagull\_nz](https://foil.zone/u/seagull_nz)\ **Replies:** 44\ **Last updated:** [August 28, 2026, 4:52pm UTC](https://foil.zone/t/waydoo-launching-foil-assist-product/25759 "2026-08-28T16:52:56Z")
Did anyone notice Waydoo is launching a Foil Assist product. It came up all over my Facebook. (https://eu.waydoo.com/products/waydoo-foilboost-assist-kit-for-foiling) They don’t have 3 blades though, no doubt that … --- ## [Foil size gong material](https://foil.zone/t/foil-size-gong-material/26091)
**Author:** [@janefoil](https://foil.zone/u/janefoil)\ **Replies:** 18\ **Last updated:** [August 28, 2026, 9:10am UTC](https://foil.zone/t/foil-size-gong-material/26091 "2026-08-28T09:10:03Z")
hello all. finally I was able to test my creation. the combination works better than expected materials used: flipsky motor 65161 flipsky vesc 75200 water cooled flipsky remote VX5 Flipsky 2 balde folding prop flit… --- ## [Efoiling uk south east locations?](https://foil.zone/t/efoiling-uk-south-east-locations/15525)
**Author:** [@takumacruising2](https://foil.zone/u/takumacruising2)\ **Replies:** 17\ **Last updated:** [August 26, 2026, 10:14pm UTC](https://foil.zone/t/efoiling-uk-south-east-locations/15525 "2026-08-26T22:14:40Z")
Are there any locations where I can take my efoil. I currently use a Takuma cruising 2. Are there any free lakes and rivers with easy access and parking nearby? Preferably a place where other efoilers may come. I under… --- ## [Foil assist in the market currently and soon to come](https://foil.zone/t/foil-assist-in-the-market-currently-and-soon-to-come/26394)
**Author:** [@ppfoiler](https://foil.zone/u/ppfoiler)\ **Replies:** 24\ **Last updated:** [August 26, 2026, 8:17pm UTC](https://foil.zone/t/foil-assist-in-the-market-currently-and-soon-to-come/26394 "2026-08-26T20:17:12Z")
Any suggestions and opinions on the best option out there. I have listed a few systems that I have researched so far: -Foil Drive - original brand, seems most common and reliable. Max version seems to fit me -Waydoo … --- ## [Wired remote for Efoil - why not?](https://foil.zone/t/wired-remote-for-efoil-why-not/27002)
**Author:** [@Gavin](https://foil.zone/u/Gavin)\ **Replies:** 4\ **Last updated:** [August 20, 2026, 4:50am UTC](https://foil.zone/t/wired-remote-for-efoil-why-not/27002 "2026-08-20T04:50:19Z")
Given that people have a tether between the board & themselves, and sometimes a cable from backpack battery to the board - why does the remote need to be wireless? A wired remote would be simpler, cheaper, fewer failure … --- ## [MICHOBBY 4.95kg assist kit for continuous eFoil use on RRD Air Beluga 140L — thoughts?](https://foil.zone/t/michobby-4-95kg-assist-kit-for-continuous-efoil-use-on-rrd-air-beluga-140l-thoughts/26819)
**Author:** [@retrofoil](https://foil.zone/u/retrofoil)\ **Replies:** 7\ **Last updated:** [July 23, 2026, 8:51am UTC](https://foil.zone/t/michobby-4-95kg-assist-kit-for-continuous-efoil-use-on-rrd-air-beluga-140l-thoughts/26819 "2026-07-23T08:51:51Z")
Hello everyone, I’m about to order MICHOBBY’s integrated foil-assist kit, but my main intended use is continuous low-mounted eFoiling. I may occasionally try it high-mounted as foil assist, but that is secondary. My se… --- ## [Early Check for Corrosion/Water Leak](https://foil.zone/t/early-check-for-corrosion-water-leak/22446)
**Author:** [@NextLevel](https://foil.zone/u/NextLevel)\ **Replies:** 1\ **Last updated:** [July 19, 2026, 4:02am UTC](https://foil.zone/t/early-check-for-corrosion-water-leak/22446 "2026-07-19T04:02:49Z")
Short story: check for detectable resistant between motor’s 3-phase circuit and motor casing, and open up the motor casing if this is not open-circuit. Long story: I thought a few of you might be interested in my recent… --- ## [Power cut off on foil assist](https://foil.zone/t/power-cut-off-on-foil-assist/26771)
**Author:** [@Philugrin](https://foil.zone/u/Philugrin)\ **Replies:** 6\ **Last updated:** [July 17, 2026, 4:32pm UTC](https://foil.zone/t/power-cut-off-on-foil-assist/26771 "2026-07-17T16:32:16Z")
Hi everyone I am Kafi from canary islands I built a foil assist with -flipsky 6384 with 2 blades propeller maytech esc 160A waterproof 12S4P molicel p45b battery I still have radical power cut when I stand up on t… --- ## [Experience with Flipsky Jet-drive?](https://foil.zone/t/experience-with-flipsky-jet-drive/26337)
**Author:** [@Alvestjo](https://foil.zone/u/Alvestjo)\ **Replies:** 96\ **Last updated:** [July 12, 2026, 7:13pm UTC](https://foil.zone/t/experience-with-flipsky-jet-drive/26337 "2026-07-12T19:13:41Z")
Hi, I found this “jet drive” on Flipsky website: They have a version with a 70165 motor (8800w peek) and one with 65161 motor (6000w peek). The smaller one is only $422. Does anyone have any experience using these … --- ## [New Maytech kit](https://foil.zone/t/new-maytech-kit/23046)
**Author:** [@Kook](https://foil.zone/u/Kook)\ **Replies:** 47\ **Last updated:** [July 11, 2026, 2:16pm UTC](https://foil.zone/t/new-maytech-kit/23046 "2026-07-11T14:16:02Z")
Any opinions on this kit from Maytech and what battery I should pair this with? 41kg thrust with steel prop. 95kg rider loves tiny foils. 24-48V Efoil DIY Foil Assist Kit ( 6579 110KV Waterproof Motor +160A Fully Wa… --- ## [Flipsky 65220 motor](https://foil.zone/t/flipsky-65220-motor/21793)
**Author:** [@hsyn](https://foil.zone/u/hsyn)\ **Replies:** 112\ **Last updated:** [July 1, 2026, 1:19pm UTC](https://foil.zone/t/flipsky-65220-motor/21793 "2026-07-01T13:19:37Z")
hello friends Does anyone have any information about the Flipsky 65220 motor? Has anyone tried it before? --- ## [Buenas quiero poner un ando flipsky vx3 a tak](https://foil.zone/t/buenas-quiero-poner-un-ando-flipsky-vx3-a-tak/26707)
**Author:** [@Mcstyle](https://foil.zone/u/Mcstyle)\ **Replies:** 0\ **Last updated:** [June 30, 2026, 3:00pm UTC](https://foil.zone/t/buenas-quiero-poner-un-ando-flipsky-vx3-a-tak/26707 "2026-06-30T15:00:23Z")
Buenas quiero poner un ando flipsky vx3 a takuma v2 tal como me dice internet alguien sabe si es cortar enpalmar i listos e visto algun post poraqui pero no acavo de tenerlo claro alguien me podria ajudar gracias anteman… --- ## [Route cables inside Axis mast](https://foil.zone/t/route-cables-inside-axis-mast/17302)
**Author:** [@t-dub-maui](https://foil.zone/u/t-dub-maui)\ **Replies:** 9\ **Last updated:** [June 30, 2026, 6:04am UTC](https://foil.zone/t/route-cables-inside-axis-mast/17302 "2026-06-30T06:04:51Z")
Hey y’all, I bought an Axis aluminum mast thinking it was hollow inside and I could just route the motor cables inside the mast. However, turns out that the mast has some material inside. Does anyone have experience w… --- ## [Takuma motor conversion](https://foil.zone/t/takuma-motor-conversion/26681)
**Author:** [@erwan](https://foil.zone/u/erwan)\ **Replies:** 4\ **Last updated:** [June 29, 2026, 11:54pm UTC](https://foil.zone/t/takuma-motor-conversion/26681 "2026-06-29T23:54:33Z")
Hello everyone! I bought a broken Takuma for a really good price, with 2 batteries. Everything seems to be working fine except the motor. I’m wondering if anyone replace the motor with a direct drive Flipsky? What do you… --- ## [Just introducing myself. Keen for foil assist tow boogie etc](https://foil.zone/t/just-introducing-myself-keen-for-foil-assist-tow-boogie-etc/21705)
**Author:** [@bigben](https://foil.zone/u/bigben)\ **Replies:** 5\ **Last updated:** [June 28, 2026, 7:46am UTC](https://foil.zone/t/just-introducing-myself-keen-for-foil-assist-tow-boogie-etc/21705 "2026-06-28T07:46:41Z")
Soooo, long time lurker. Just thought I’d introduce myself before I get everyones backs up bowling in and asking a load of questions… I have previously been completely immersed in the electric skateboard scene firstly m… --- ## [Lift efoil ebox](https://foil.zone/t/lift-efoil-ebox/26524)
**Author:** [@Aas9558](https://foil.zone/u/Aas9558)\ **Replies:** 4\ **Last updated:** [June 21, 2026, 6:34pm UTC](https://foil.zone/t/lift-efoil-ebox/26524 "2026-06-21T18:34:00Z")
Hey I’m looking for lift efoil ebox broken if anyone is selling one? I live in California too by the way. Thanks --- ## [G300 Connectivity problems with USB-C](https://foil.zone/t/g300-connectivity-problems-with-usb-c/22287)
**Author:** [@Gustav](https://foil.zone/u/Gustav)\ **Replies:** 19\ **Last updated:** [June 17, 2026, 11:46pm UTC](https://foil.zone/t/g300-connectivity-problems-with-usb-c/22287 "2026-06-17T23:46:01Z")
Hi there I am having connectivity problems with the connection between the Makerx G300 VESC and my windows PC. Neither the connection with USB or Bluetooth works with my pc. My PC does not see any devices when connected… --- ## [What is everyone’s top speed?](https://foil.zone/t/what-is-everyone-s-top-speed/26562)
**Author:** [@DutchFoiler](https://foil.zone/u/DutchFoiler)\ **Replies:** 2\ **Last updated:** [June 11, 2026, 6:49am UTC](https://foil.zone/t/what-is-everyone-s-top-speed/26562 "2026-06-11T06:49:07Z")
Hey all. Trying to find out how fast everyone is going. Couldn’t find any posts, and thought this would be interesting for general information. If you dare to share… Please include: Motor / KV / VESC Battery specs F… --- ## [Vx5 remote gears prgramming](https://foil.zone/t/vx5-remote-gears-prgramming/26368)
**Author:** [@Amo1](https://foil.zone/u/Amo1)\ **Replies:** 6\ **Last updated:** [June 8, 2026, 3:48am UTC](https://foil.zone/t/vx5-remote-gears-prgramming/26368 "2026-06-08T03:48:28Z")
Hi guys,i just put in my efoil build today for the 2nd time,alibaba board,vx3,65161 motor and armstrong mast and foils. My question is this, the vx3 remote only has 3 gear modes i.e low medium and high and are not adju… --- ## [Lift efoil battery case](https://foil.zone/t/lift-efoil-battery-case/26507)
**Author:** [@Aas9558](https://foil.zone/u/Aas9558)\ **Replies:** 3\ **Last updated:** [May 30, 2026, 5:42pm UTC](https://foil.zone/t/lift-efoil-battery-case/26507 "2026-05-30T17:42:22Z")
Hey does anybody have an extra lift efoil battery case that they would sell… Preferably one that is not working ? --- ## [Looking for eFoil Riders & Enthusiasts for Short Research Survey](https://foil.zone/t/looking-for-efoil-riders-enthusiasts-for-short-research-survey/26449)
**Author:** [@FlorianFoil](https://foil.zone/u/FlorianFoil)\ **Replies:** 1\ **Last updated:** [May 21, 2026, 4:30pm UTC](https://foil.zone/t/looking-for-efoil-riders-enthusiasts-for-short-research-survey/26449 "2026-05-21T16:30:29Z")
Hi everyone, I am currently conducting research for my thesis on influencer marketing within the eFoil industry and how different types of content influence customer perceptions, trust, and purchasing decisions. I’m lo… [Next page](https://foil.zone/c/efoils-electric-hydrofoil-surfboards/40.md?page=1)