# efoils – Electric Hydrofoil Surfboards **URL:** https://foil.zone/c/efoils-electric-hydrofoil-surfboards/40.md?page=1 [Latest](https://foil.zone/latest.md) · [Categories](https://foil.zone/categories.md) · [Tags](https://foil.zone/tags.md) **Page:** 2 --- ## [Foil assist system in a BACKPACK, dream o reality?](https://foil.zone/t/foil-assist-system-in-a-backpack-dream-o-reality/25697)
**Author:** [@luciomonter](https://foil.zone/u/luciomonter)\ **Replies:** 27\ **Last updated:** [April 27, 2026, 12:17pm UTC](https://foil.zone/t/foil-assist-system-in-a-backpack-dream-o-reality/25697 "2026-04-27T12:17:27Z")
Hello everybody! I hope my question is not trivial and not been discussed yet. I’m wing foiler with some years of experience. I already have a few boards and north sonar foil with different front wings e stabs My aim i… --- ## [New DIY Low‑Speed E‑Foil Project for 2026](https://foil.zone/t/new-diy-low-speed-e-foil-project-for-2026/26021)
**Author:** [@Cid156](https://foil.zone/u/Cid156)\ **Replies:** 3\ **Last updated:** [April 21, 2026, 9:38pm UTC](https://foil.zone/t/new-diy-low-speed-e-foil-project-for-2026/26021 "2026-04-21T21:38:21Z")
After my so‑so success with my DIY surf/foil board in 2025, I’m now trying to develop a more conventional system. The goal is not to fly, since it’s still prohibited here, but rather to ride at low speed (~15 km/h) with… --- ## [New Battery Tech Jetwave](https://foil.zone/t/new-battery-tech-jetwave/26270)
**Author:** [@Windigo](https://foil.zone/u/Windigo)\ **Replies:** 2\ **Last updated:** [April 16, 2026, 3:49pm UTC](https://foil.zone/t/new-battery-tech-jetwave/26270 "2026-04-16T15:49:55Z")
I came across this Jetwave battery that uses 12 semi solid cells. Endurance Battery – JetWave Official That would make building a battery pretty easy and great specs. I think it might be those cells Farasis S55 Semi-Sol… --- ## [Flipsky remote range?](https://foil.zone/t/flipsky-remote-range/26195)
**Author:** [@Windfoil](https://foil.zone/u/Windfoil)\ **Replies:** 1\ **Last updated:** [April 2, 2026, 10:21pm UTC](https://foil.zone/t/flipsky-remote-range/26195 "2026-04-02T22:21:50Z")
Planing a tow buggy build and considering a flipsky kit with motor controller and remote. My question is the range of the Flipsky remote is it enough? --- ## [Great deal on battery pack](https://foil.zone/t/great-deal-on-battery-pack/25865)
**Author:** [@windego](https://foil.zone/u/windego)\ **Replies:** 10\ **Last updated:** [March 31, 2026, 4:01pm UTC](https://foil.zone/t/great-deal-on-battery-pack/25865 "2026-03-31T16:01:57Z")
Maybe too good to be true! --- ## [New DIY Efoil balance issues](https://foil.zone/t/new-diy-efoil-balance-issues/25815)
**Author:** [@fullyfoil](https://foil.zone/u/fullyfoil)\ **Replies:** 22\ **Last updated:** [March 24, 2026, 3:11pm UTC](https://foil.zone/t/new-diy-efoil-balance-issues/25815 "2026-03-24T15:11:00Z")
Hi All, So got my DIY efoil going and gave it a first test. All the motor ESC and things seems to work good. On an inflatable 145l board with NSP 2500 front wing and 80cm mast. I mounted the motor most of the way down s… --- ## [Waydoo hull only diy with flipsky to etow](https://foil.zone/t/waydoo-hull-only-diy-with-flipsky-to-etow/26141)
**Author:** [@Windfoil](https://foil.zone/u/Windfoil)\ **Replies:** 4\ **Last updated:** [March 23, 2026, 4:29pm UTC](https://foil.zone/t/waydoo-hull-only-diy-with-flipsky-to-etow/26141 "2026-03-23T16:29:03Z")
Waydoo Flyer hull only diy build with flipsky kit --- ## [New efoiling motor from Hobiba](https://foil.zone/t/new-efoiling-motor-from-hobiba/20456)
**Author:** [@Hailin](https://foil.zone/u/Hailin)\ **Replies:** 11\ **Last updated:** [March 6, 2026, 8:30pm UTC](https://foil.zone/t/new-efoiling-motor-from-hobiba/20456 "2026-03-06T20:30:12Z")
We hobiba declare new efoil motors options available to deversify the efoil future: Shanghai Boat Show 2024 (Mar 26 to Mar 29), Hobiba launched 3 new products Diameter options available in D57, D47, and D37, length fr… --- ## [Selling my used efoil surfboard](https://foil.zone/t/selling-my-used-efoil-surfboard/26026)
**Author:** [@Justgotin699](https://foil.zone/u/Justgotin699)\ **Replies:** 1\ **Last updated:** [March 2, 2026, 4:26pm UTC](https://foil.zone/t/selling-my-used-efoil-surfboard/26026 "2026-03-02T16:26:57Z")
--- ## [300A 85V Waterproof Speed Controller](https://foil.zone/t/300a-85v-waterproof-speed-controller/26030)
**Author:** [@PaulKirdy](https://foil.zone/u/PaulKirdy)\ **Replies:** 0\ **Last updated:** [March 2, 2026, 8:14am UTC](https://foil.zone/t/300a-85v-waterproof-speed-controller/26030 "2026-03-02T08:14:17Z")
Maytech New Release High Volt 300A 85V Waterproof ESC Motor Controller for Marine Sports, Efoil, jetsurf, jetboard, jetski, jet kayak, etc., --- ## [Lift motor wire connectors?](https://foil.zone/t/lift-motor-wire-connectors/14532)
**Author:** [@Chilepin](https://foil.zone/u/Chilepin)\ **Replies:** 18\ **Last updated:** [February 28, 2026, 1:14pm UTC](https://foil.zone/t/lift-motor-wire-connectors/14532 "2026-02-28T13:14:54Z")
I want to use a lift motor unit with a custom board. Does anyone know a compatible receiving end for the lift connectors for the ESC side? --- ## [Legalize efoil in Austria](https://foil.zone/t/legalize-efoil-in-austria/25979)
**Author:** [@peterblodorn](https://foil.zone/u/peterblodorn)\ **Replies:** 0\ **Last updated:** [February 22, 2026, 10:34am UTC](https://foil.zone/t/legalize-efoil-in-austria/25979 "2026-02-22T10:34:17Z")
We would like to legalize eFoils in Austria. Please support us by signing this petition. --- ## [Lift Efoil motor/propellor making noise - whats wrong?](https://foil.zone/t/lift-efoil-motor-propellor-making-noise-whats-wrong/22815)
**Author:** [@ericj](https://foil.zone/u/ericj)\ **Replies:** 8\ **Last updated:** [February 19, 2026, 8:27pm UTC](https://foil.zone/t/lift-efoil-motor-propellor-making-noise-whats-wrong/22815 "2026-02-19T20:27:11Z")
Hi All, Lift Efoil Propulsion unit makes noise… Anyone know what can be the problem? Bearings? Any suggestions welcome. Thanks, Eric --- ## [What esc for Flipsky 75200](https://foil.zone/t/what-esc-for-flipsky-75200/25953)
**Author:** [@Amo1](https://foil.zone/u/Amo1)\ **Replies:** 2\ **Last updated:** [February 19, 2026, 8:11am UTC](https://foil.zone/t/what-esc-for-flipsky-75200/25953 "2026-02-19T08:11:47Z")
Hi guys new here. I am looking for ideas fir esc cooling,with the mast i have theres barely enough room for the 8wg wiring ,i have no way of getting a tube up there unfortunately. The esc that came with the board (alib… --- ## [Trouble getting Flipsky 75200 working in UART](https://foil.zone/t/trouble-getting-flipsky-75200-working-in-uart/25939)
**Author:** [@fullyfoil](https://foil.zone/u/fullyfoil)\ **Replies:** 1\ **Last updated:** [February 16, 2026, 10:07am UTC](https://foil.zone/t/trouble-getting-flipsky-75200-working-in-uart/25939 "2026-02-16T10:07:34Z")
Hi All, Have a Flipsky 75200 Pro ESC and a VX3 Pro remote. Can get working in PPM mode no problems but wanted to try and get the power feedback to the remote to see what I am using. Changed the cable to the UART connec… --- ## [DI Y Foildrive cable](https://foil.zone/t/di-y-foildrive-cable/25884)
**Author:** [@pistolriver](https://foil.zone/u/pistolriver)\ **Replies:** 0\ **Last updated:** [February 9, 2026, 11:58pm UTC](https://foil.zone/t/di-y-foildrive-cable/25884 "2026-02-09T23:58:24Z")
Could any one point me to a good source in the U.S for phase wire cable the same gauge as Foildrive uses? Thanks! --- ## [North foil drive](https://foil.zone/t/north-foil-drive/25864)
**Author:** [@windego](https://foil.zone/u/windego)\ **Replies:** 0\ **Last updated:** [February 6, 2026, 3:07pm UTC](https://foil.zone/t/north-foil-drive/25864 "2026-02-06T15:07:09Z")
Check this out. $$$$$$ --- ## [Retrofitting non-functional Manta V1](https://foil.zone/t/retrofitting-non-functional-manta-v1/25842)
**Author:** [@Atomic-Chomik](https://foil.zone/u/Atomic-Chomik)\ **Replies:** 1\ **Last updated:** [February 5, 2026, 11:16pm UTC](https://foil.zone/t/retrofitting-non-functional-manta-v1/25842 "2026-02-05T23:16:51Z")
So i have the opportunity to pickup a nonfunctional Manta system that buddy got during the crowdfunding program. Batteries are dead. Anyone have any thoughts or experience retro-fitting this system? Im currently utiliz… --- ## [3 blades and base for flipsky 6384](https://foil.zone/t/3-blades-and-base-for-flipsky-6384/24154)
**Author:** [@Antoine987](https://foil.zone/u/Antoine987)\ **Replies:** 9\ **Last updated:** [January 30, 2026, 9:06pm UTC](https://foil.zone/t/3-blades-and-base-for-flipsky-6384/24154 "2026-01-30T21:06:16Z")
Hello, I am looking for a .stl file to print a three-blade propeller and its support for a Flipsky 6384 motor. I am looking for a file that allows solid printing of the blades with the correct orientation for carbon prin… --- ## [Trouble setting up VESC](https://foil.zone/t/trouble-setting-up-vesc/25777)
**Author:** [@fullyfoil](https://foil.zone/u/fullyfoil)\ **Replies:** 5\ **Last updated:** [January 22, 2026, 10:10pm UTC](https://foil.zone/t/trouble-setting-up-vesc/25777 "2026-01-22T22:10:57Z")
Hi All, Setting up a DIY efoil. Have a Flipsky VX3 Pro remote, 75200 Pro ESC, 65161,120kv motor. Used this video as he had the same motor and ESC. https://www.youtube.com/watch?v=QaVPISP8BF4 Got to the motor FOC setti… --- ## [How to open the esc of a Takuma Carver 2](https://foil.zone/t/how-to-open-the-esc-of-a-takuma-carver-2/25739)
**Author:** [@Willem](https://foil.zone/u/Willem)\ **Replies:** 2\ **Last updated:** [January 13, 2026, 6:25pm UTC](https://foil.zone/t/how-to-open-the-esc-of-a-takuma-carver-2/25739 "2026-01-13T18:25:58Z")
After removal of the screws, the cover is glued to the case. How to open without damaging the case/ --- ## [Gong V3 Experiences - Efoil](https://foil.zone/t/gong-v3-experiences-efoil/25440)
**Author:** [@HOF](https://foil.zone/u/HOF)\ **Replies:** 9\ **Last updated:** [January 12, 2026, 5:03pm UTC](https://foil.zone/t/gong-v3-experiences-efoil/25440 "2026-01-12T17:03:57Z")
Hey guys! I am about to build myself a new E-Foil, DIY and am searching for the best Gong V3 setup. The reasoning behind V3 is that i want to stay current with technology and versions. I know V2 would be perfectly fine… --- ## [Has anyone used an alternate remote (Maytech MTSKR2005WF V2) with an official Foil Drive?](https://foil.zone/t/has-anyone-used-an-alternate-remote-maytech-mtskr2005wf-v2-with-an-official-foil-drive/19448)
**Author:** [@drc13](https://foil.zone/u/drc13)\ **Replies:** 15\ **Last updated:** [January 12, 2026, 3:42am UTC](https://foil.zone/t/has-anyone-used-an-alternate-remote-maytech-mtskr2005wf-v2-with-an-official-foil-drive/19448 "2026-01-12T03:42:15Z")
Hi Guys, I’m a user of an official Foil Drive Assist Plus. Unfortunately on a recent session in the surf my remote has ended up on the bottom of the ocean. The Maytech MTSKR2005WF V2 looks to be the exact remote sans l… --- ## [Waydoo evo max plus](https://foil.zone/t/waydoo-evo-max-plus/25710)
**Author:** [@MEGAS](https://foil.zone/u/MEGAS)\ **Replies:** 0\ **Last updated:** [January 8, 2026, 10:52am UTC](https://foil.zone/t/waydoo-evo-max-plus/25710 "2026-01-08T10:52:41Z")
hello,new here. happy new year. i own a waydoo evo max plus 130 with all the goods. Only 2 hours used.Liked it a lot. how do you find this kit? --- ## [Flipsky 65161 NSP motor mount needed](https://foil.zone/t/flipsky-65161-nsp-motor-mount-needed/25407)
**Author:** [@fullyfoil](https://foil.zone/u/fullyfoil)\ **Replies:** 1\ **Last updated:** [December 29, 2025, 2:00pm UTC](https://foil.zone/t/flipsky-65161-nsp-motor-mount-needed/25407 "2025-12-29T14:00:31Z")
Hi All, Just got a Flipsky 65161 motor and bits to E-Foil my setup. Looking for a 3D model for the motor mount to suit a NSP mast. Or does someone have a profile drawing of the mast I can use to make my own model ? Ch… --- ## [Foil Drive Battery Pack Assistant](https://foil.zone/t/foil-drive-battery-pack-assistant/24020)
**Author:** [@lyla](https://foil.zone/u/lyla)\ **Replies:** 11\ **Last updated:** [December 27, 2025, 10:21pm UTC](https://foil.zone/t/foil-drive-battery-pack-assistant/24020 "2025-12-27T22:21:40Z")
I stumbled upon this community by chance, knowing nothing except batteries. For years, I worked at a battery pack company. A friend of mine had a broken foil drive, but buying original battery packs in China was expensi… --- ## [DIY eFoil – Flipsky setup and alternatives?](https://foil.zone/t/diy-efoil-flipsky-setup-and-alternatives/25392)
**Author:** [@Slandersen](https://foil.zone/u/Slandersen)\ **Replies:** 36\ **Last updated:** [December 13, 2025, 11:52pm UTC](https://foil.zone/t/diy-efoil-flipsky-setup-and-alternatives/25392 "2025-12-13T23:52:27Z")
Greetings from Denmark, I’m completely new to foiling, but I’ve been windsurfing and kite surfing for years. I’m quite technical, which is why I plan to build the board and the battery pack myself. I’m considering the … --- ## [Looking for Advice on a Removable DIY e-Foil Setup for My Wingfoil Board](https://foil.zone/t/looking-for-advice-on-a-removable-diy-e-foil-setup-for-my-wingfoil-board/25514)
**Author:** [@steve068](https://foil.zone/u/steve068)\ **Replies:** 2\ **Last updated:** [December 4, 2025, 11:26am UTC](https://foil.zone/t/looking-for-advice-on-a-removable-diy-e-foil-setup-for-my-wingfoil-board/25514 "2025-12-04T11:26:23Z")
First of all, thanks to this great community and for all the information I’ve been able to pick up from the posts. So here’s my project, I own the following wingfoil board : Gong hipe perf inflatable board 5,5’ 125L 8… --- ## [Mast adapter for Flipsky Motors](https://foil.zone/t/mast-adapter-for-flipsky-motors/25482)
**Author:** [@steveasi](https://foil.zone/u/steveasi)\ **Replies:** 3\ **Last updated:** [November 29, 2025, 2:08am UTC](https://foil.zone/t/mast-adapter-for-flipsky-motors/25482 "2025-11-29T02:08:38Z")
Does anyone know if you can buy foil mast adapters/clamps that suit Flipsky waterproof motors. If so could you please provide details, thanks. --- ## [Maytecs new MTED 70 with Prop guard and 4 blade prop - Anyone tried it at water speed](https://foil.zone/t/maytecs-new-mted-70-with-prop-guard-and-4-blade-prop-anyone-tried-it-at-water-speed/25372)
**Author:** [@mark](https://foil.zone/u/mark)\ **Replies:** 2\ **Last updated:** [November 14, 2025, 7:44am UTC](https://foil.zone/t/maytecs-new-mted-70-with-prop-guard-and-4-blade-prop-anyone-tried-it-at-water-speed/25372 "2025-11-14T07:44:13Z")
Of course, Impressive looking hydro work on the tapered prop end of these new motors has probably made a difference to the cavitation problems were all facing with these big motors… The Prop guard also usually is a fail… [Previous page](https://foil.zone/c/efoils-electric-hydrofoil-surfboards/40.md) [Next page](https://foil.zone/c/efoils-electric-hydrofoil-surfboards/40.md?page=2)