# 3D-printed folding propeller

**URL:** https://foil.zone/t/3d-printed-folding-propeller/8861
**Category:** Propulsion System (Motor, Gears)
**Created:** [July 31, 2020, 6:19am UTC](https://foil.zone/t/3d-printed-folding-propeller/8861 "2020-07-31T06:19:41Z")
**Posts on this page:** 1
**Showing post:** 92

<div class="post-metadata">

### Author: ![Manufoil](https://foil.zone/letter_avatar_proxy/v4/letter/m/a6a055/32.png) [@Manufoil](https://foil.zone/u/Manufoil)
#### Post date: [October 16, 2021, 8:45am UTC](https://foil.zone/t/3d-printed-folding-propeller/8861/92 "2021-10-16T08:45:28Z")

</div>

Best would be to take the rubber hub out, get a part turned from aluminium, tig weld it, re face and balance. Glue usually don’t last long. On aluminium JB weld pretty good otherwise an industrial epoxy glue.

 ![20211016_214143](https://foil.zone/uploads/default/original/3X/7/3/730bf61d21d89ef826124ce70d7662fdf35ddd25.jpeg)  
 ![20211016_214026](https://foil.zone/uploads/default/original/3X/5/0/50fdcae6d4ead110c69616e15a659274e27a0f9d.jpeg)

---

_[View the full topic](https://foil.zone/t/3d-printed-folding-propeller/8861)._