# 3D Printed Motor Mount?

**URL:** https://foil.zone/t/3d-printed-motor-mount/16298
**Category:** efoils – Electric Hydrofoil Surfboards
**Created:** [July 29, 2022, 6:29pm UTC](https://foil.zone/t/3d-printed-motor-mount/16298 "2022-07-29T18:29:05Z")
**Posts on this page:** 1
**Showing post:** 2

<div class="post-metadata">

### Author: ![brycej](https://foil.zone/user_avatar/foil.zone/brycej/32/10595_2.png) [@brycej](https://foil.zone/u/brycej)
#### Post date: [July 29, 2022, 10:41pm UTC](https://foil.zone/t/3d-printed-motor-mount/16298/2 "2022-07-29T22:41:45Z")

</div>

What had worked best for me was this 3 piece design with tpu for pieces around the mast and a petg pr pla nosecone. The stl was a couple posts below this link

> [@3d printing material for motor mount](https://foil.zone/t/3d-printing-material-for-motor-mount/15489/7):
>
> Tried PETG against motor, TPU over the mast and PETG or PLA nosecone Ended up replacing the PETG with TPU against the motor after these pictures, when the PETG cracked. Nice thing about this is you can replace all the parts without rethreading motor wires through. Replaced with TPU motor and mast clamp - PLA nosecone [image]

---

_[View the full topic](https://foil.zone/t/3d-printed-motor-mount/16298)._