# 3d printing material for motor mount **URL:** https://foil.zone/t/3d-printing-material-for-motor-mount/15489 **Category:** Build, Repair & Mod **Created:** [April 5, 2022, 5:10pm UTC](https://foil.zone/t/3d-printing-material-for-motor-mount/15489 "2022-04-05T17:10:10Z") **Posts on this page:** 1 **Showing post:** 32
### Author: ![hangloose](https://foil.zone/user_avatar/foil.zone/hangloose/32/29329_2.png) [@hangloose](https://foil.zone/u/hangloose) #### Post date: [March 1, 2024, 3:58am UTC](https://foil.zone/t/3d-printing-material-for-motor-mount/15489/32 "2024-03-01T03:58:21Z")
> [@2. Build from South Germany. Prone Board, SAITE 63100, 12S7P Molicel P42A](https://foil.zone/t/2-build-from-south-germany-prone-board-saite-63100-12s7p-molicel-p42a/19959/33): > > Thanks so much. Oh, that’s going to be difficult. I have a fully modded Anycubic Vyper. The mods on the printer alone took over 1.5 years. Only the frame on my printer is original rofl Different motherboard and Klipper make the subtle difference with good components. This includes my 7 years of experience in 3D printing. If I were to buy a printer now it would be a Bambu. It can keep up with mine in terms of quality. But I just have too much fun constructing and tinkering and screwing. … --- _[View the full topic](https://foil.zone/t/3d-printing-material-for-motor-mount/15489)._