# 3d printing material for motor mount

**URL:** https://foil.zone/t/3d-printing-material-for-motor-mount/15489
**Category:** Build, Repair & Mod
**Created:** [April 5, 2022, 5:10pm UTC](https://foil.zone/t/3d-printing-material-for-motor-mount/15489 "2022-04-05T17:10:10Z")
**Posts on this page:** 1
**Showing post:** 42

<div class="post-metadata">

### Author: ![brycej](https://foil.zone/user_avatar/foil.zone/brycej/32/10595_2.png) [@brycej](https://foil.zone/u/brycej)
#### Post date: [March 4, 2024, 8:12pm UTC](https://foil.zone/t/3d-printing-material-for-motor-mount/15489/42 "2024-03-04T20:12:47Z")

</div>

TPU for clamp. PETG or ABS for back of mount. PLA or whatever for nosecone.

I broke one 2 piece clamp filled with epoxy before this and haven’t had any more issues (besides lost the nose cone because it was just press fit initially)

> [@Redpinelabs board #2](https://foil.zone/t/redpinelabs-board-2/9784/56):
>
> More test fits

---

_[View the full topic](https://foil.zone/t/3d-printing-material-for-motor-mount/15489)._