# 3d printing material for motor mount

**URL:** https://foil.zone/t/3d-printing-material-for-motor-mount/15489
**Category:** Build, Repair & Mod
**Created:** [April 5, 2022, 5:10pm UTC](https://foil.zone/t/3d-printing-material-for-motor-mount/15489 "2022-04-05T17:10:10Z")
**Posts on this page:** 1
**Showing post:** 7

<div class="post-metadata">

### Author: ![brycej](https://foil.zone/user_avatar/foil.zone/brycej/32/10595_2.png) [@brycej](https://foil.zone/u/brycej)
#### Post date: [April 6, 2022, 8:25pm UTC](https://foil.zone/t/3d-printing-material-for-motor-mount/15489/7 "2022-04-06T20:25:10Z")

</div>

Tried PETG against motor, TPU over the mast and PETG or PLA nosecone

Ended up replacing the PETG with TPU against the motor after these pictures, when the PETG cracked.

 ![image](https://foil.zone/uploads/default/original/3X/e/0/e0ccf4668dc182781b769e08b33b2af9d5f933ea.jpeg)

 ![image](https://foil.zone/uploads/default/original/3X/4/d/4ded0ae66d0cbd5b34cc16da6c82a25448f9402d.jpeg)

Nice thing about this is you can replace all the parts without rethreading motor wires through.

Replaced with TPU motor and mast clamp - PLA nosecone

![image](https://foil.zone/uploads/default/original/3X/5/3/532b7b571c2afcf58184aff33813964126bc0ed4.jpeg)

---

_[View the full topic](https://foil.zone/t/3d-printing-material-for-motor-mount/15489)._