# A simple and practical remote control is already on the market (I want to sell)
**URL:** https://foil.zone/t/a-simple-and-practical-remote-control-is-already-on-the-market-i-want-to-sell/12357
**Category:** Commercial Ads/Vendors
**Created:** [April 7, 2021, 11:45pm UTC](https://foil.zone/t/a-simple-and-practical-remote-control-is-already-on-the-market-i-want-to-sell/12357 "2021-04-07T23:45:12Z")
**Posts on this page:** 19
**Page:** 1
### Author:  [@qzyf](https://foil.zone/u/qzyf)
#### Post date: [April 7, 2021, 11:45pm UTC](https://foil.zone/t/a-simple-and-practical-remote-control-is-already-on-the-market-i-want-to-sell/12357/1 "2021-04-07T23:45:13Z")
[https://m.aliexpress.com/item/1005002400981820.html?trace=wwwdetail2mobilesitedetail](https://m.aliexpress.com/item/1005002400981820.html?trace=wwwdetail2mobilesitedetail)
 
---
### Author:  [@tacktun](https://foil.zone/u/tacktun)
#### Post date: [April 8, 2021, 9:09am UTC](https://foil.zone/t/a-simple-and-practical-remote-control-is-already-on-the-market-i-want-to-sell/12357/2 "2021-04-08T09:09:00Z")
Have you tried it out?
---
### Author:  [@qzyf](https://foil.zone/u/qzyf)
#### Post date: [April 8, 2021, 9:36am UTC](https://foil.zone/t/a-simple-and-practical-remote-control-is-already-on-the-market-i-want-to-sell/12357/3 "2021-04-08T09:36:26Z")
I’ve tried it many times. It’s stable and won’t leak
---
### Author:  [@JvdZ](https://foil.zone/u/JvdZ)
#### Post date: [April 8, 2021, 9:39am UTC](https://foil.zone/t/a-simple-and-practical-remote-control-is-already-on-the-market-i-want-to-sell/12357/4 "2021-04-08T09:39:53Z")
Have you had a look at the inside? Potting and waterproofing?
---
### Author:  [@qzyf](https://foil.zone/u/qzyf)
#### Post date: [April 8, 2021, 9:42am UTC](https://foil.zone/t/a-simple-and-practical-remote-control-is-already-on-the-market-i-want-to-sell/12357/5 "2021-04-08T09:42:19Z")
The circuit board and the screen are completely padded with glue, so there are no leaks and they are very reliable
---
### Author:  [@JvdZ](https://foil.zone/u/JvdZ)
#### Post date: [April 8, 2021, 9:59am UTC](https://foil.zone/t/a-simple-and-practical-remote-control-is-already-on-the-market-i-want-to-sell/12357/6 "2021-04-08T09:59:06Z")
OK, sounds OK.
Is there any info on the display regarding VESC data? I only see PPM signal, so I don’t think there is a possibility to transfer data from the VESC
---
### Author:  [@Manufoil](https://foil.zone/u/Manufoil)
#### Post date: [April 8, 2021, 10:12am UTC](https://foil.zone/t/a-simple-and-practical-remote-control-is-already-on-the-market-i-want-to-sell/12357/7 "2021-04-08T10:12:07Z")
First time poster, are you from Erayfoil?
---
### Author:  [@tacktun](https://foil.zone/u/tacktun)
#### Post date: [April 8, 2021, 11:08am UTC](https://foil.zone/t/a-simple-and-practical-remote-control-is-already-on-the-market-i-want-to-sell/12357/8 "2021-04-08T11:08:17Z")
I too would like to know what data can be shown on the remote
---
### Author:  [@qzyf](https://foil.zone/u/qzyf)
#### Post date: [April 8, 2021, 1:39pm UTC](https://foil.zone/t/a-simple-and-practical-remote-control-is-already-on-the-market-i-want-to-sell/12357/9 "2021-04-08T13:39:40Z")
I used to use the Maytech remote control all the time, and the screen displayed basically the same content as the Maytech remote control, with the addition of cruise and out-of-control lock Settings
---
### Author:  [@JvdZ](https://foil.zone/u/JvdZ)
#### Post date: [April 8, 2021, 1:53pm UTC](https://foil.zone/t/a-simple-and-practical-remote-control-is-already-on-the-market-i-want-to-sell/12357/10 "2021-04-08T13:53:20Z")
Possibly not with a read time of \>4days.
Erayfoils also has a reference on youtube, but what they show is a Fliteboard… 🤔
[ ](https://www.youtube.com/watch?v=itOFVioYwxg)
---
### Author:  [@JvdZ](https://foil.zone/u/JvdZ)
#### Post date: [April 8, 2021, 1:56pm UTC](https://foil.zone/t/a-simple-and-practical-remote-control-is-already-on-the-market-i-want-to-sell/12357/11 "2021-04-08T13:56:04Z")
How do you feed in that data? Is there a TX RX on the receiver for the VESC data?
---
### Author:  [@Felixfoiler](https://foil.zone/u/Felixfoiler)
#### Post date: [April 8, 2021, 4:09pm UTC](https://foil.zone/t/a-simple-and-practical-remote-control-is-already-on-the-market-i-want-to-sell/12357/12 "2021-04-08T16:09:32Z")
It looks cool, but display is very small and I don’t think potting any remote is the right way. Eventually from vibrations and heat change the epoxy/potting will loosen and the remote will loos waterproofness. Look at the open lift foil remote, no potting at all. My remote no potting. That’s the right way to get the housing waterproof and not the pcb.
---
### Author:  [@qzyf](https://foil.zone/u/qzyf)
#### Post date: [April 8, 2021, 11:12pm UTC](https://foil.zone/t/a-simple-and-practical-remote-control-is-already-on-the-market-i-want-to-sell/12357/13 "2021-04-08T23:12:30Z")
Packing is hard glue, there will be no loose worry, waterproof is very reliable
---
### Author:  [@JvdZ](https://foil.zone/u/JvdZ)
#### Post date: [April 9, 2021, 7:07am UTC](https://foil.zone/t/a-simple-and-practical-remote-control-is-already-on-the-market-i-want-to-sell/12357/14 "2021-04-09T07:07:56Z")
Here is a recent “instruction” video, it seems to have a communication port. And an input for the main battery voltage.
It’s sooo cheap, they did have the money to remove the foil on the screen for a good promo video. 🤣
Maby worth a try?
[ ](https://www.youtube.com/watch?v=BKPDggMn_MY&t=109s)
---
### Author:  [@Manufoil](https://foil.zone/u/Manufoil)
#### Post date: [April 10, 2021, 1:12am UTC](https://foil.zone/t/a-simple-and-practical-remote-control-is-already-on-the-market-i-want-to-sell/12357/15 "2021-04-10T01:12:47Z")
Can you please make clear if you work for this company or not. In an other post you mention a new motor is coming.
---
### Author:  [@qzyf](https://foil.zone/u/qzyf)
#### Post date: [April 10, 2021, 2:14am UTC](https://foil.zone/t/a-simple-and-practical-remote-control-is-already-on-the-market-i-want-to-sell/12357/16 "2021-04-10T02:14:49Z")
Thank you for your attention. Like everyone else, I started to learn how to make hydrofoil several years ago and learned a lot from this forum. We don’t have a complete set of products available yet, but we’ll share our best accessories with you first.
---
### Author:  [@foilmore](https://foil.zone/u/foilmore)
#### Post date: [April 10, 2021, 4:06am UTC](https://foil.zone/t/a-simple-and-practical-remote-control-is-already-on-the-market-i-want-to-sell/12357/17 "2021-04-10T04:06:25Z")
Seems plain as day to me that he does.
---
### Author:  [@sat\_be](https://foil.zone/u/sat_be)
#### Post date: [April 10, 2021, 9:51am UTC](https://foil.zone/t/a-simple-and-practical-remote-control-is-already-on-the-market-i-want-to-sell/12357/18 "2021-04-10T09:51:03Z")
Please put it under Comercial Adds/Vedonrs where it belongs to.
---
### Author:  [@Larsb](https://foil.zone/u/Larsb)
#### Post date: [February 21, 2023, 6:17pm UTC](https://foil.zone/t/a-simple-and-practical-remote-control-is-already-on-the-market-i-want-to-sell/12357/19 "2023-02-21T18:17:20Z")
There are lots of mil-spec or space spec components being potted. Potting is a reliable way to seal against the environment - with the right compound you’ll get a chemical bond that is secure.
Seals and gaskets can work great but eventually dry, age, get dusty and can start to leak so if you can accept that it’s non repairable i’d prefer a potted part.