# Aerostar ESC 130A HV RVS G2
**URL:** https://foil.zone/t/aerostar-esc-130a-hv-rvs-g2/22378
**Category:** Electronics (ESC, remote, batteries)
**Created:** [December 1, 2024, 9:49pm UTC](https://foil.zone/t/aerostar-esc-130a-hv-rvs-g2/22378 "2024-12-01T21:49:51Z")
**Posts on this page:** 7
**Page:** 1
### Author:  [@KONUTZ](https://foil.zone/u/KONUTZ)
#### Post date: [December 1, 2024, 9:49pm UTC](https://foil.zone/t/aerostar-esc-130a-hv-rvs-g2/22378/1 "2024-12-01T21:49:51Z")
Anyone tried this ESC for an “FD assist” ??..looks good and the.price is right.
K
> **[Aerostar 130A HV RVS G2 32bit (6~14S) Opto Electronic Speed Controller...](https://hobbyking.com/en_us/aerostar-130a-hv-rvs-g2-32bit-6-14s-opto-electronic-speed-controller-w-reverse-function.html)**
>
> Aerostar 130A HV RVS G2 32bit (6~14S) Opto Electronic Speed Controller w/Reverse Function & Bluetooth Module. Hobbyking for the best deals is brushless motors, blushless speed controllers, and RC planes, helicopters and cars.
---
### Author:  [@lishine](https://foil.zone/u/lishine)
#### Post date: [December 1, 2024, 10:21pm UTC](https://foil.zone/t/aerostar-esc-130a-hv-rvs-g2/22378/2 "2024-12-01T22:21:17Z")
On this note a question - can our 12s motors handle 14s?
---
### Author:  [@lishine](https://foil.zone/u/lishine)
#### Post date: [December 2, 2024, 3:14pm UTC](https://foil.zone/t/aerostar-esc-130a-hv-rvs-g2/22378/3 "2024-12-02T15:14:01Z")
Actualy 6374 can handle 16s.
So maybe build a 14s battery and use with this controller?
The charger have to handle 2 x 8s or 6s + 8s
---
### Author:  [@Larsb](https://foil.zone/u/Larsb)
#### Post date: [December 2, 2024, 4:59pm UTC](https://foil.zone/t/aerostar-esc-130a-hv-rvs-g2/22378/4 "2024-12-02T16:59:26Z")
There is no boundary at 16s. The far end of the usage is normally when eddy current losses get too high, but where that is for a 6374 i don’t know exactly. 80100 motors was around 8000rpm, i guess about the same. 20s 80kV would be nice, except the increased electrical shock risk😇
---
### Author:  [@sat\_be](https://foil.zone/u/sat_be)
#### Post date: [December 2, 2024, 11:28pm UTC](https://foil.zone/t/aerostar-esc-130a-hv-rvs-g2/22378/5 "2024-12-02T23:28:40Z")
I tested the 20S vesc I buit for a Onewheel with 18S and a 63100 on the bench. This was without load, but the sound of the bearings told me they did not like it. Must have been around 8k rpm.
I think the limitig factor is rpm (and max current).
---
### Author:  [@Larsb](https://foil.zone/u/Larsb)
#### Post date: [December 3, 2024, 7:19am UTC](https://foil.zone/t/aerostar-esc-130a-hv-rvs-g2/22378/6 "2024-12-03T07:19:17Z")
63100 is a demanding motor with the long unsupported bell that can create vibrations, there’s also the effect of the quality of the bearings. I got a 63100 from freerchobby with noname bearings, it vibrated horribly already at 4000rpm.
---
### Author:  [@KONUTZ](https://foil.zone/u/KONUTZ)
#### Post date: [December 3, 2024, 4:15pm UTC](https://foil.zone/t/aerostar-esc-130a-hv-rvs-g2/22378/7 "2024-12-03T16:15:20Z")
The original.post was to ask: has anyone had any experience with this ESC?..has anyone?
K