# Alibaba foil assist motors

**URL:** https://foil.zone/t/alibaba-foil-assist-motors/22367
**Category:** SUP Foiling
**Created:** [November 29, 2024, 3:41pm UTC](https://foil.zone/t/alibaba-foil-assist-motors/22367 "2024-11-29T15:41:10Z")
**Posts on this page:** 3
**Page:** 1

<div class="post-metadata">

### Author: ![ricoman](https://foil.zone/letter_avatar_proxy/v4/letter/r/8edcca/32.png) [@ricoman](https://foil.zone/u/ricoman)
#### Post date: [November 29, 2024, 3:41pm UTC](https://foil.zone/t/alibaba-foil-assist-motors/22367/1 "2024-11-29T15:41:10Z")

</div>

Super disappointing assist motor from

 ![IMG_0075](https://foil.zone/uploads/default/original/3X/2/2/22c6d9e695b2c9ff8d32dc3f4490163e524351c8.jpeg)  
Alibaba. I like the design but it is not waterproof. It worked great on dry land but died in less than 15 seconds in the water.  
Does anyone have an assist motor that works? My DIY motors have been mostly failures. I had a couple of good systems but I have had a lot of water ingress problems. I take my board in the surf and it gets pretty beat up.  
Foil Drive has a pretty good system but I’m not ready to throw down $6,000 on an assist motor

Any Suggestions?

---

<div class="post-metadata">

### Author: ![lishine](https://foil.zone/user_avatar/foil.zone/lishine/32/29468_2.png) [@lishine](https://foil.zone/u/lishine)
#### Post date: [November 29, 2024, 3:50pm UTC](https://foil.zone/t/alibaba-foil-assist-motors/22367/2 "2024-11-29T15:50:49Z")

</div>

Put battery and esc in a waterproof abs box or in a pelican. Attach esc to outside heatsink, cable to motor through gland. Add Bec, receiver.  
Put it in a backpack or attach on top of the board.  
More details are on the forum.

---

<div class="post-metadata">

### Author: ![StokeFoiling](https://foil.zone/user_avatar/foil.zone/stokefoiling/32/35457_2.png) [@StokeFoiling](https://foil.zone/u/StokeFoiling)
#### Post date: [December 4, 2024, 11:55pm UTC](https://foil.zone/t/alibaba-foil-assist-motors/22367/3 "2024-12-04T23:55:00Z")

</div>

Check out Stoke Foil Boost at [stokefoiling.com](http://stokefoiling.com) 🙂 If you have any questions please write two us directly and we will be happy to help.
