# Amperage issue after 75200 update
**URL:** https://foil.zone/t/amperage-issue-after-75200-update/27043
**Category:** Build, Repair & Mod
**Tags:** vesc
**Created:** [August 21, 2026, 3:43pm UTC](https://foil.zone/t/amperage-issue-after-75200-update/27043 "2026-08-21T15:43:00Z")
**Posts on this page:** 3
**Page:** 1
### Author:  [@stinkwhistle](https://foil.zone/u/stinkwhistle)
#### Post date: [August 21, 2026, 3:43pm UTC](https://foil.zone/t/amperage-issue-after-75200-update/27043/1 "2026-08-21T15:43:00Z")
I recently updated the firmware on my 75200 as well as the updated vesc tool. I went through the process of setting everything back up just like it was before but now in Low the remote will show 32a max, Medium 60a max and high 110a max. The setup process is a little different now there a few more options and I feel like I’ve changed everything I could with no improvement. My wife generally rides in Low with no issue and I ride in Medium. High will get on foil easily but way to fast for her. What am I missing in the the setup that would cause this? Like I mentioned above, all was well before the updated firmware/re programming process.
12s10p
Flipsky75200
Flipsky vx3
flipsky 65161
Fliteboard prop
Fliteboard Pro board
---
### Author:  [@Foilguy](https://foil.zone/u/Foilguy)
#### Post date: [August 21, 2026, 5:43pm UTC](https://foil.zone/t/amperage-issue-after-75200-update/27043/2 "2026-08-21T17:43:08Z")
Can’t really help with first hand knowledge as I have never upgraded the firmware on my 75200.
Perhaps review @ludwig_bre video about setup for ideas. I recall there was a bit about remote near the end of the vid.
Another approach would be get a VX5 and utilize the “gear” function of it. A lot of individual control of what the throttle will do. Each rider just finds the best gear(s) for them during the ride
---
### Author:  [@FoilOwl](https://foil.zone/u/FoilOwl)
#### Post date: [August 23, 2026, 12:19am UTC](https://foil.zone/t/amperage-issue-after-75200-update/27043/3 "2026-08-23T00:19:01Z")
Could you share what your current limits you have in the motorconfig for the VESC?