# Another file request
**URL:** https://foil.zone/t/another-file-request/21927
**Category:** efoils – Electric Hydrofoil Surfboards
**Created:** [September 30, 2024, 9:49pm UTC](https://foil.zone/t/another-file-request/21927 "2024-09-30T21:49:06Z")
**Posts on this page:** 8
**Page:** 1
### Author:  [@MacIak](https://foil.zone/u/MacIak)
#### Post date: [September 30, 2024, 9:49pm UTC](https://foil.zone/t/another-file-request/21927/1 "2024-09-30T21:49:07Z")
Are there any live files out there for GongV2 fuse, wings and motormount adapter. There was a folder in search but link seems dead:(
---
### Author:  [@oacastefanita](https://foil.zone/u/oacastefanita)
#### Post date: [June 23, 2025, 8:21am UTC](https://foil.zone/t/another-file-request/21927/2 "2025-06-23T08:21:40Z")
Did you manage to find it? I am looking for a Gong V2 prop guard with the fuselage attachment
---
### Author:  [@DanDyse](https://foil.zone/u/DanDyse)
#### Post date: [June 23, 2025, 9:07am UTC](https://foil.zone/t/another-file-request/21927/3 "2025-06-23T09:07:07Z")
for what motor? usually the guard is mainly fixed to the motor with an optional thin bridge to the fuselage …
---
### Author:  [@oacastefanita](https://foil.zone/u/oacastefanita)
#### Post date: [June 23, 2025, 9:27am UTC](https://foil.zone/t/another-file-request/21927/4 "2025-06-23T09:27:56Z")
For Flipsky 65161 (sorry for not mentioning), Flipksy made a 30 degrees change to their screws positions and old files don’t work anymore and I lack the 3D skills to modify an old propguard
I have only managed to find a file that allows the back of engine to be attached to the Gong V2 fuselage but it doesn’t come with a propguard
---
### Author:  [@DanDyse](https://foil.zone/u/DanDyse)
#### Post date: [June 23, 2025, 9:31am UTC](https://foil.zone/t/another-file-request/21927/5 "2025-06-23T09:31:36Z")
do you have an STL of an old one with wrong screw positions?
---
### Author:  [@oacastefanita](https://foil.zone/u/oacastefanita)
#### Post date: [June 23, 2025, 1:01pm UTC](https://foil.zone/t/another-file-request/21927/6 "2025-06-23T13:01:42Z")
I have added the Old propoguard file and the a tail support with the correct screw alignment [here](https://drive.google.com/drive/folders/1xnBdbZPMWc2yhnkpBAmfKwiSKsTRtrmh?usp=share_link)
---
### Author:  [@DanDyse](https://foil.zone/u/DanDyse)
#### Post date: [June 24, 2025, 1:18pm UTC](https://foil.zone/t/another-file-request/21927/7 "2025-06-24T13:18:03Z")
not a 3d pro either, but comparing the two looks rather like a 20° or 40° change.
I have loaded the guard into Tinkercad, cut the center, rotated it and joined it to the original, maybe this helps?
> **[3D design Prop-Fuse-Fix - Tinkercad](https://www.tinkercad.com/things/0MJWCAORjyx-prop-fuse-fix?sharecode=blAbRZYhhvjPqGXWTG0SeqmMklP_fV7m6CfJ7CYXCHM)**
>
> 3D design Prop-Fuse-Fix
---
### Author:  [@oacastefanita](https://foil.zone/u/oacastefanita)
#### Post date: [June 26, 2025, 11:27am UTC](https://foil.zone/t/another-file-request/21927/8 "2025-06-26T11:27:17Z")
Looks about right, I’ll start printing and let you know. Thank you