# Anyone used the Sequre 14130 ESC?
**URL:** https://foil.zone/t/anyone-used-the-sequre-14130-esc/27112
**Category:** Build, Repair & Mod
**Tags:** vesc
**Created:** [September 2, 2026, 5:38am UTC](https://foil.zone/t/anyone-used-the-sequre-14130-esc/27112 "2026-09-02T05:38:37Z")
**Posts on this page:** 16
**Page:** 1
### Author:  [@thuffam](https://foil.zone/u/thuffam)
#### Post date: [September 2, 2026, 5:38am UTC](https://foil.zone/t/anyone-used-the-sequre-14130-esc/27112/1 "2026-09-02T05:38:37Z")
Looking for a replacement ESC/VESC for my waist foil assist. My new Flipsky Mini FSESC v6.8 is useless worked once then gutless ever since - no idea why - suspect it fried itself (even though no faults in VESC tool and I’ve checked and rechecked and rebuilt all wiring).
I was looking at a Sequre 14200 after being recommended this - but noticed on the [Sequre website that there is a 14130](https://sequremall.com/products/sequre-sqesc-14130-brushless-esc-5-14s-lipo-power-supply-130a) as I cant but help think that 200A is overkill for an assist - ie my old FlyColor FlyDragon 80ESC worked perfectly for 6 months until I drowned it.
I guess the benefit of the 200 units is more headroom. Also ESC over VESC is simpler but you loose the config (I would really liked to have tried FOC etc).
As its not waterproof I would encapsulate/pot it.
Anyone used this? Thoughts/recommendations?
Thanks
Tim
---
### Author:  [@Jan12](https://foil.zone/u/Jan12)
#### Post date: [September 2, 2026, 7:02am UTC](https://foil.zone/t/anyone-used-the-sequre-14130-esc/27112/2 "2026-09-02T07:02:02Z")
No, but thank you.
I will try them in the tow boogie.
---
### Author:  [@nekitesurfing](https://foil.zone/u/nekitesurfing)
#### Post date: [September 2, 2026, 4:23pm UTC](https://foil.zone/t/anyone-used-the-sequre-14130-esc/27112/3 "2026-09-02T16:23:19Z")
I have 2 x 14200 Pro in my tow boogie. They have been working very well to date.
---
### Author:  [@thuffam](https://foil.zone/u/thuffam)
#### Post date: [September 2, 2026, 7:40pm UTC](https://foil.zone/t/anyone-used-the-sequre-14130-esc/27112/4 "2026-09-02T19:40:36Z")
Oh… i just received a reply from Sequre (i asked them if the 14130 would be suitable)… their response was:
“the 14130 ESC is not suitable for the 6384 motor. We recommend using the WP14200 ESC instead.”
There we have it… its a no go.
Better to know up front.
---
### Author:  [@Jan12](https://foil.zone/u/Jan12)
#### Post date: [September 3, 2026, 7:13am UTC](https://foil.zone/t/anyone-used-the-sequre-14130-esc/27112/5 "2026-09-03T07:13:58Z")
That is a pretty weird statement. Its just an ESC,
From the specs its perfectly fine, even within a good margin
So its seems that either their specs are complete BS or they just want to sell you their more expensive hardware for no reason.
Guess I will find out which one it is. 😉
---
### Author:  [@thuffam](https://foil.zone/u/thuffam)
#### Post date: [September 4, 2026, 6:34am UTC](https://foil.zone/t/anyone-used-the-sequre-14130-esc/27112/6 "2026-09-04T06:34:36Z")
Previously I would have agreed with you… however after having a crap time with the Flipsky Mini FSESC v6.8 - which has similar specs (12S, 100A, 150AMax/burst)… I now understand why. it seems these smaller ones have smaller traces on the PCBs and smaller MOSFETS or connections too them and much less capacity to handle the current and heat.
But yet, they should clearly state that and not advertise them as 100+A units as they clearly cannot handle that.
Wierdly… the FS mini gave me one great session when I had Motor Current Max set to 90A … and never since. it just gets to 40% throttle then does not provide any more thrust after that - but runs smoothly, just weak - so obviously hitting some internal limit. I have done a bunch of testing in a pool running the realtime analyser… and everything seems fine… just limited power output. When I increased the max motor current, it also scaled the output linearly… but to get the same power I had on session one, I would need to set it to 120A… which is clearly above its continuous rated limit of 100A. Makes no sense at all. I just figure its what Ive read, that FS have QA issues.
I’ve just bought a FS 75100 Pro… will see how that goes.
---
### Author:  [@sat\_be](https://foil.zone/u/sat_be)
#### Post date: [September 4, 2026, 6:54am UTC](https://foil.zone/t/anyone-used-the-sequre-14130-esc/27112/7 "2026-09-04T06:54:39Z")
For up to 12S, I can recommend Harry Drive M Classic, it is good value for the price and excellent customer service. I run it in my hip assist for quit some time. It is compact and powerful enough for an assist with a 6384.
Phase 100A, 150 abs max, battery 75A.
Could go higher but with a 2P pack I’d rather limit the battery amps so my battery does not get too warm.
> **[M-Classic](https://dq-drives.de/en-us/products/m-classic?variant=53592817336661)**
>
> A budget friendly motor controller, which fulfils most needs and delivering solid performance. The PCB has all components on only one side to enable easy mating against a cooling surface. This is even possible without a case. For signal interfacing,...
---
### Author:  [@Jan12](https://foil.zone/u/Jan12)
#### Post date: [September 4, 2026, 7:46am UTC](https://foil.zone/t/anyone-used-the-sequre-14130-esc/27112/8 "2026-09-04T07:46:26Z")
> [@thuffam](#):
>
> But yet, they should clearly state that and not advertise them as 100+A units as they clearly cannot handle that.
> …
> I’ve just bought a FS 75100 Pro… will see how that goes.
Not sure how you project your experiences over to the Sequre.
I have the 12200s which also have a very small formfactor and they work flawlessly.
On the bigger VESCs most of the size seem to result just from the number of connectors. I have the 75200 here on my desk and it is obviously just oversized for no reason at all.
Also considering what you wrote, what made you buy another 100A ESC?
---
### Author:  [@Jezza](https://foil.zone/u/Jezza)
#### Post date: [September 4, 2026, 3:30pm UTC](https://foil.zone/t/anyone-used-the-sequre-14130-esc/27112/9 "2026-09-04T15:30:33Z")
Can these not handle 14S?
---
### Author:  [@sat\_be](https://foil.zone/u/sat_be)
#### Post date: [September 4, 2026, 5:01pm UTC](https://foil.zone/t/anyone-used-the-sequre-14130-esc/27112/10 "2026-09-04T17:01:47Z")
Yes, you’re right, rated 65V, so should be fine with 14S. I don’t know how much headroom there is.
---
### Author:  [@thuffam](https://foil.zone/u/thuffam)
#### Post date: [September 4, 2026, 8:42pm UTC](https://foil.zone/t/anyone-used-the-sequre-14130-esc/27112/11 "2026-09-04T20:42:12Z")
re comparing to the 14130 sequre… I was assuming due to similar small form factor… but I could be completely wrong… which is highly likely because my old Dragonfly 80A ESC was even smaller and worked flawlessly (although it did overheat my batteries).
I decided to go with the 75100 for a few reasons… a local friend had one for sale, I like the configurability of VESC over standard ESC (/AM32/BLHeli32 etc) - much more options (a major one for me is battery current max), and from what I can see the 75100 is designed to handle for more heat, and also for much higher voltage than the mini which also gives more headroom… but mainly because it is probably the most popular/well used VESC on this forum - tried and tested and more info.
I have only just started to realise the benefits of going to higher S battery packs… meaning less heating on cells. Something I have yet to try.
---
### Author:  [@Jan12](https://foil.zone/u/Jan12)
#### Post date: [September 9, 2026, 4:46pm UTC](https://foil.zone/t/anyone-used-the-sequre-14130-esc/27112/12 "2026-09-09T16:46:00Z")
Ok, this got here from China in 4 days, it’s almost faster than half of domestic shipping.
Looks great. Form factor is good and heat transfer also seems really good (forgot how much I hate soldering cables to ESCs).
Signal cable is pre soldered which is nice.
Soldering the thin GND cable to the 12200 was pretty annoying.
Using the same settings from my 12200 it behaves identical on the bench. I think for my tow boogie this could be a drop in replacement.
---
### Author:  [@thuffam](https://foil.zone/u/thuffam)
#### Post date: [September 9, 2026, 10:45pm UTC](https://foil.zone/t/anyone-used-the-sequre-14130-esc/27112/13 "2026-09-09T22:45:32Z")
What did you get? a 14130?
---
### Author:  [@Jan12](https://foil.zone/u/Jan12)
#### Post date: [September 10, 2026, 5:42am UTC](https://foil.zone/t/anyone-used-the-sequre-14130-esc/27112/14 "2026-09-10T05:42:47Z")
Yes, two in fact. 😉
---
### Author:  [@thuffam](https://foil.zone/u/thuffam)
#### Post date: [September 10, 2026, 6:22am UTC](https://foil.zone/t/anyone-used-the-sequre-14130-esc/27112/15 "2026-09-10T06:22:51Z")
Great - will look forward to hear how they go. I hope they go well because they look great to me, Love to know Sequres reasoning behind their comment.
---
### Author:  [@thuffam](https://foil.zone/u/thuffam)
#### Post date: [September 15, 2026, 2:46am UTC](https://foil.zone/t/anyone-used-the-sequre-14130-esc/27112/16 "2026-09-15T02:46:23Z")
FYI… some interesting feeeback re the Flipsky FSESC v6.8… i said it was no good… turns out that was due to the props i was using (DIY)… i have now bought a FD 3 blade aluminium prop and it has been working flawlessly and this prop extends my runtime 30%!!
I can imagine probably better (easier on it) with the 2 blade prop too.