# Anyone using current control mode?
**URL:** https://foil.zone/t/anyone-using-current-control-mode/5877
**Category:** Electronics (ESC, remote, batteries)
**Created:** [October 5, 2019, 6:36am UTC](https://foil.zone/t/anyone-using-current-control-mode/5877 "2019-10-05T06:36:16Z")
**Posts on this page:** 4
**Page:** 1
### Author:  [@Alexandre](https://foil.zone/u/Alexandre)
#### Post date: [October 5, 2019, 6:36am UTC](https://foil.zone/t/anyone-using-current-control-mode/5877/1 "2019-10-05T06:36:16Z")
I use the classic duty control , but since my remote is kind of on/off even when adjusting the throttle curve , I wanted to know if the current control mode can give easier control over start ( longer and smoother play with throttle )?
---
### Author:  [@V\_S](https://foil.zone/u/V_S)
#### Post date: [October 5, 2019, 7:04am UTC](https://foil.zone/t/anyone-using-current-control-mode/5877/2 "2019-10-05T07:04:54Z")
I use current control mode. That is really smooth.
But i have a long trigger anyway. Using Dutycycle mode gives a very jerky Ampere Log and you can get very high current peaks.
---
### Author:  [@Windtigertim](https://foil.zone/u/Windtigertim)
#### Post date: [October 5, 2019, 7:25pm UTC](https://foil.zone/t/anyone-using-current-control-mode/5877/3 "2019-10-05T19:25:55Z")
Exactly what @V_S said!
Originally i used Duty Cycle mode with my 75/300, however the current draw was rather inconsistent. I even found that some of the high peaks took me all the way up and tripped the ABS\_Overcurrent fault. Since then i use only current control mode and won’t go back.
---
### Author:  [@Alexandre](https://foil.zone/u/Alexandre)
#### Post date: [October 5, 2019, 7:37pm UTC](https://foil.zone/t/anyone-using-current-control-mode/5877/4 "2019-10-05T19:37:56Z")
Thank you for answer , I will try this next time
Pics that high! Over 420A that is crazy