# Beenee´s DIY Foil Drive Assist

**URL:** https://foil.zone/t/beenee-s-diy-foil-drive-assist/16545
**Category:** Build, Repair & Mod
**Created:** [August 27, 2022, 9:24am UTC](https://foil.zone/t/beenee-s-diy-foil-drive-assist/16545 "2022-08-27T09:24:01Z")
**Posts on this page:** 3
**Page:** 1

<div class="post-metadata">

### Author: ![kkolli](https://foil.zone/user_avatar/foil.zone/kkolli/32/24944_2.png) [@kkolli](https://foil.zone/u/kkolli)
#### Post date: [August 27, 2022, 9:24am UTC](https://foil.zone/t/beenee-s-diy-foil-drive-assist/16545/1 "2022-08-27T09:24:01Z")

</div>

hallo everybody…

I am new to this forum. First of all, thanks to the administrators and users for this remarkable collection of information. My son and I are wingfoilers and pumpfoilers and are already building our own custommade wingfoil boards.

Now we want to try our hand at an E-Foil Assist. I also fly RC helicopters so I have the eltectric basics to fall back on. Unfortunately the knowledge about Fusion 3D is not so good yet 😉 And also my 3D printer is not so great.

For my project I follow Pablo\_foil ([DIY electric foil assist. Steps+pictures+cad files](https://foil.zone/t/diy-electric-foil-assist-steps-pictures-cad-files/15041)) and first got myself a 6374 170 kV motor. The propeller is already quite good, now it’s time for the fuselage.

Pablo designed the fuselage for a Gong mast, but I plan to take an old Takuma foil and here the mast is 11.5 wide and 16mm thick. I have first scaled the data set of Pablo something, let’s see if that works.

Does anyone have a STL for a 63 motor for Takuma Mast, Unifoil or Signature?

Greetings and thanks

olli

who wants to follow the project on Instagram: @beenee\_foilboards

---

<div class="post-metadata">

### Author: ![pablo\_foil](https://foil.zone/letter_avatar_proxy/v4/letter/p/5fc32e/32.png) [@pablo\_foil](https://foil.zone/u/pablo_foil)
#### Post date: [August 27, 2022, 4:35pm UTC](https://foil.zone/t/beenee-s-diy-foil-drive-assist/16545/2 "2022-08-27T16:35:14Z")

</div>

I also attached the freecad files in thingiverse. If you can get the mast airfoil, just replace it in the cad and create a new stl (freecad has a triangular mesh generator)

---

<div class="post-metadata">

### Author: ![kkolli](https://foil.zone/user_avatar/foil.zone/kkolli/32/24944_2.png) [@kkolli](https://foil.zone/u/kkolli)
#### Post date: [September 19, 2022, 8:39am UTC](https://foil.zone/t/beenee-s-diy-foil-drive-assist/16545/3 "2022-09-19T08:39:35Z")

</div>

Great! Everything is working better then expected. Maiden already done!