# BREmote V2 - Open Source Remote
**URL:** https://foil.zone/t/bremote-v2-open-source-remote/23689
**Category:** Electronics (ESC, remote, batteries)
**Created:** [May 20, 2025, 3:59pm UTC](https://foil.zone/t/bremote-v2-open-source-remote/23689 "2025-05-20T15:59:07Z")
**Posts on this page:** 20
**Page:** 9
### Author:  [@Bzhwindtalker](https://foil.zone/u/Bzhwindtalker)
#### Post date: [August 29, 2025, 7:37pm UTC](https://foil.zone/t/bremote-v2-open-source-remote/23689/164 "2025-08-29T19:37:51Z")
EDIT : I was missing the two dots in in the ?setConf command, solved š
Hey, I also wanted to remove the block time for steering, but I get decode errors and my config went back to default. Any thing I missed or doing wrong? (remote works and could configure the last time)
thanks in advance!
---
### Author:  [@Airtimeasto](https://foil.zone/u/Airtimeasto)
#### Post date: [August 30, 2025, 1:37pm UTC](https://foil.zone/t/bremote-v2-open-source-remote/23689/165 "2025-08-30T13:37:38Z")
Hi Ludwig
Iāve ordered 2 remotes back in July and still havenāt received them? Is there still issues with customs or something? I have sent an email with no reply. Any news on deliveries to Australia?
---
### Author:  [@ludwig\_bre](https://foil.zone/u/ludwig_bre)
#### Post date: [August 30, 2025, 2:42pm UTC](https://foil.zone/t/bremote-v2-open-source-remote/23689/166 "2025-08-30T14:42:58Z")
Sorry to hear
Sales and shipping is @JasminRM topic
He will reply to you shortly. In the future please post questions regarding shipping and so on here:
> [@BREmote Kits for Sale](https://foil.zone/t/bremote-kits-for-sale/19312/):
>
> Hi Everybody, Like promised, Jasmin from [openfoil.com](http://openfoil.com) will start selling BREmote kits today. To keep the sales of the kits and the original idea seperated, I created this new topic. For questions/feedback regarding the kits sold, please use this topic. For questions/feedback regarding the idea or firmware, please go here: [BREmote - DIY Remote](https://foil.zone/t/bremote-diy-remote/17474) He sent me a kit to try out first, so here is my opinion on it: [[#007-6: BREmote Kits for SALE - Unboxing and Review] ](https://www.youtube.com/watch?v=JgoEMERxcIg)
---
### Author:  [@Alvestjo](https://foil.zone/u/Alvestjo)
#### Post date: [August 31, 2025, 11:25am UTC](https://foil.zone/t/bremote-v2-open-source-remote/23689/167 "2025-08-31T11:25:56Z")
Hi,
I completed tha assembly of the TX yesterday and it seems to work. But I can not get the RX to work. Out of the box it did not seem to have any firmware so I flashed it with the V2\_Integration\_Rx.ino.merged.bin image to address 0x0 and now it is booting. But it seems to be some kind of error when starting up the radio.
This is the serial output:
> * * *
>
> \*\* BREmote V2 RX \*\*
> \*\* MAC: B05A527D7850 \*\*
> \*\* SW Version: 1 \*\*
> \*\* Compiled: Jul 10 2025 20:15:24 \*\*
>
> * * *
>
> Starting AW9532ā¦ Done
> Initializing SPIFFSā¦Done
> Getting usr conf from SPIFFSā¦
> File does not exist
> No conf in SPIFFS, writing defaultā¦
> Struct saved to SPIFFS as Base64
> Encoded Data: AQABAPf/AAAyAAAAAADcBdAH3AXQB+gDAAAgQQAAcEIAAAEAAAAAAEGOHDwAABVasAAAAA==
> Encoded Data Read: AQABAPf/AAAyAAAAAADcBdAH3AXQB+gDAAAgQQAAcEIAAAEAAAAAAEGOHDwAABVasAAAAA==
> Struct successfully read from SPIFFS
> ā¦ Done
> Starting Radioā¦ Power: -9 Region: EU868 TOA: 0 Failed, code: -2
The bind led is flashing 3 times and the aux is off. I tried to hold the bind button to enter binding mode but is is not working.
Is my board faulty? How do I fix this?
/Jonas
---
### Author:  [@ludwig\_bre](https://foil.zone/u/ludwig_bre)
#### Post date: [August 31, 2025, 11:56am UTC](https://foil.zone/t/bremote-v2-open-source-remote/23689/168 "2025-08-31T11:56:29Z")
Starting Radioā¦ Power: -9 Region: EU868 TOA: 0 Failed, code: -2
Means there is an error initializing the radio module
Can you please check if there is a solder bridge around the main processor on the back of the Rx? Please also send HD images of both sides of soldering
---
### Author:  [@Alvestjo](https://foil.zone/u/Alvestjo)
#### Post date: [August 31, 2025, 12:21pm UTC](https://foil.zone/t/bremote-v2-open-source-remote/23689/169 "2025-08-31T12:21:38Z")
Thanks for a very fast response!
Images of my board:
[https://www.dropbox.com/scl/fo/xauh69xr8xplviq76afqs/ADE3zktVFmxXfbReMlMsP4k?rlkey=hwtgkfoc2ccd179wzn4v3vm3b&dl=0](https://www.dropbox.com/scl/fo/xauh69xr8xplviq76afqs/ADE3zktVFmxXfbReMlMsP4k?rlkey=hwtgkfoc2ccd179wzn4v3vm3b&dl=0)
---
### Author:  [@skud-surfboard](https://foil.zone/u/skud-surfboard)
#### Post date: [August 31, 2025, 12:33pm UTC](https://foil.zone/t/bremote-v2-open-source-remote/23689/170 "2025-08-31T12:33:41Z")
hello ludwig i got a strange micro mouvement in the steering servo all the time and i think that it makes some bug in the direction when it come back to center is there a parameter i can modify
> **[New video Ā· Sunday, Aug 31 š¬](https://photos.app.goo.gl/rgdtDBPpru5mmAKm8)**
---
### Author:  [@Alvestjo](https://foil.zone/u/Alvestjo)
#### Post date: [August 31, 2025, 12:35pm UTC](https://foil.zone/t/bremote-v2-open-source-remote/23689/171 "2025-08-31T12:35:56Z")
> [@Alvestjo](#):
>
> Region: EU868 TOA: 0 Failed, code: -2
As you suggested it must have been a solder bridge between the pins. I took a knife and ācleanedā bethween all the pins of the radio chip on the backside and now it is working!
---
### Author:  [@ludwig\_bre](https://foil.zone/u/ludwig_bre)
#### Post date: [August 31, 2025, 12:44pm UTC](https://foil.zone/t/bremote-v2-open-source-remote/23689/172 "2025-08-31T12:44:04Z")
Looks like there was one here
Happy it works now!
---
### Author:  [@ludwig\_bre](https://foil.zone/u/ludwig_bre)
#### Post date: [August 31, 2025, 12:45pm UTC](https://foil.zone/t/bremote-v2-open-source-remote/23689/173 "2025-08-31T12:45:49Z")
> [@skud-surfboard](#):
>
> hello ludwig i got a strange micro mouvement in the steering servo all the time and i think that it makes some bug in the direction when it come back to center is there a parameter i can modify
Hey
Can you please check with another servo, this looks like your servo maybe has water inside
Also, how do you supply power to the servo and how do you supply power to the vesc? Do you have a schematic?
---
### Author:  [@skud-surfboard](https://foil.zone/u/skud-surfboard)
#### Post date: [August 31, 2025, 12:59pm UTC](https://foil.zone/t/bremote-v2-open-source-remote/23689/174 "2025-08-31T12:59:20Z")
servo is supply by bec on the rx it was doing it first time never touch the water do the same in the water, when i turn the remote off it stop with power supply it looks like an order give by the remote, is the steering influence have to be a certain value ?
---
### Author:  [@philippe](https://foil.zone/u/philippe)
#### Post date: [August 31, 2025, 1:05pm UTC](https://foil.zone/t/bremote-v2-open-source-remote/23689/175 "2025-08-31T13:05:07Z")
Hello Ludwig
I canāt get the configuration to display correctly on the terminal. The table displays for 1 second and then moves to another page, so I canāt read all the information.
---
### Author:  [@ludwig\_bre](https://foil.zone/u/ludwig_bre)
#### Post date: [August 31, 2025, 1:14pm UTC](https://foil.zone/t/bremote-v2-open-source-remote/23689/176 "2025-08-31T13:14:02Z")
> [@skud-surfboard](#):
>
> servo is supply by bec on the rx
Which BEC exactly? The BREmote BEC? That canāt be used for Servo, only for ESCs! For servo please get a high current BEC
---
### Author:  [@ludwig\_bre](https://foil.zone/u/ludwig_bre)
#### Post date: [August 31, 2025, 1:14pm UTC](https://foil.zone/t/bremote-v2-open-source-remote/23689/177 "2025-08-31T13:14:39Z")
> [@philippe](#):
>
> Hello Ludwig
> I canāt get the configuration to display correctly on the terminal. The table displays for 1 second and then moves to another page, so I canāt read all the information.
You have a translator active in your browser? Please disable it!
---
### Author:  [@philippe](https://foil.zone/u/philippe)
#### Post date: [August 31, 2025, 1:26pm UTC](https://foil.zone/t/bremote-v2-open-source-remote/23689/178 "2025-08-31T13:26:04Z")
yes indeed, thanks again, another little question can we have the return of the board battery on the TX if so how can we do it
---
### Author:  [@skud-surfboard](https://foil.zone/u/skud-surfboard)
#### Post date: [August 31, 2025, 1:33pm UTC](https://foil.zone/t/bremote-v2-open-source-remote/23689/179 "2025-08-31T13:33:47Z")
bec servo is high power 4 amp sold as you said on the rx board
---
### Author:  [@ludwig\_bre](https://foil.zone/u/ludwig_bre)
#### Post date: [August 31, 2025, 1:57pm UTC](https://foil.zone/t/bremote-v2-open-source-remote/23689/180 "2025-08-31T13:57:42Z")
Please provide a schematic and image of the set-up
---
### Author:  [@skud-surfboard](https://foil.zone/u/skud-surfboard)
#### Post date: [August 31, 2025, 5:37pm UTC](https://foil.zone/t/bremote-v2-open-source-remote/23689/181 "2025-08-31T17:37:08Z")
- and - from the battery to the be, from the bec to the rx, - to gnd rx, and +from bec to the 5 volt rx and to the 5 volt servo make the bridge as you said, and gnd 5 volt and signal to the servo, esc cable in h
is place
the battery pin to check voltage come from the + that is connect for supply the bec
---
### Author:  [@ludwig\_bre](https://foil.zone/u/ludwig_bre)
#### Post date: [August 31, 2025, 5:57pm UTC](https://foil.zone/t/bremote-v2-open-source-remote/23689/182 "2025-08-31T17:57:11Z")
Thank you for the image
It looks correct, can you confirm if the output voltage of the BEC is stable and if the servo has not been damaged by any other reason?
Maybe try supply power with another 5V source instead of BEC and try another servo if you have one?
---
### Author:  [@ecpow](https://foil.zone/u/ecpow)
#### Post date: [September 5, 2025, 2:32pm UTC](https://foil.zone/t/bremote-v2-open-source-remote/23689/183 "2025-09-05T14:32:03Z")
on the display is there any way to show the current amp draw from the VESC ?
[Previous page](https://foil.zone/t/bremote-v2-open-source-remote/23689.md?page=8)
[Next page](https://foil.zone/t/bremote-v2-open-source-remote/23689.md?page=10)