# BREmote V2 - Open Source Remote

**URL:** https://foil.zone/t/bremote-v2-open-source-remote/23689
**Category:** Electronics (ESC, remote, batteries)
**Created:** [May 20, 2025, 3:59pm UTC](https://foil.zone/t/bremote-v2-open-source-remote/23689 "2025-05-20T15:59:07Z")
**Posts on this page:** 1
**Showing post:** 687

<div class="post-metadata">

### Author: ![ludwig\_bre](https://foil.zone/user_avatar/foil.zone/ludwig_bre/32/24870_2.png) [@ludwig\_bre](https://foil.zone/u/ludwig_bre)
#### Post date: [October 21, 2026, 11:38am UTC](https://foil.zone/t/bremote-v2-open-source-remote/23689/687 "2026-10-21T11:38:05Z")

</div>

# Update: Multi-Tx Sharing 𐀪𐀪𐀪

Hey everybody,  
I have added a way to use multiple Tx (up to 3) to control the same boogie

Thanks to @nekitesurfing for the feature request and @Jan12 for the discussion how to

Video that describes it:

[![](https://img.youtube.com/vi/_KuIyeXrpo4/maxresdefault.jpg "#009-7: BREmote Multiple Tx Sharing") ](https://www.youtube.com/watch?v=_KuIyeXrpo4)

## Step by step:

1. Go to this [LINK](https://lbre.de/BREmote/firmware.html), update Rx to newest version. _Tx need to be at newest version V2.2.7.2 (Compile date/time: 14:43:30 Jul 11 2026), no need to update if already at this version_
2. Set up one Tx and Rx like usual (bind, data type, steering,…) until fully functional
3. Do a dry run with this setup, motors spinning and so on
4. Read out the conf\_string from this remote (“master/Tx1”)
5. Go to the setup page: [LINK](https://lbre.de/BREmote/struct.html) and select Tx\_V2, enter string, Process Data, Clone
6. You will receive the conf\_strings for Tx2 and Tx3
7. Send and save these strings to the other remotes
8. Do the calibration on these remotes and you are ready to go!

Image of the output:

 ![image](https://foil.zone/uploads/default/original/3X/b/c/bc024a5e0c8c8e23633b04ad445af14cf372c9b9.png)

---

_[View the full topic](https://foil.zone/t/bremote-v2-open-source-remote/23689)._