# Build from Podolsk,Russia

**URL:** https://foil.zone/t/build-from-podolsk-russia/14833
**Category:** Builds
**Created:** [December 30, 2021, 7:44pm UTC](https://foil.zone/t/build-from-podolsk-russia/14833 "2021-12-30T19:44:42Z")
**Posts on this page:** 1
**Showing post:** 19

<div class="post-metadata">

### Author: ![SoEFoil](https://foil.zone/user_avatar/foil.zone/soefoil/32/55_2.png) [@SoEFoil](https://foil.zone/u/SoEFoil)
#### Post date: [April 16, 2022, 4:34pm UTC](https://foil.zone/t/build-from-podolsk-russia/14833/19 "2022-04-16T16:34:12Z")

</div>

> [@thrustfoil](#):
>
> And I have designed the asymmetrical water inlet combined with motor holder

Just beware that there is a consensus around a maximum diameter of 5-6mm water inlet because above that it will generate a perceivable drag and will be subject to clogging… algae, debris, …

Credit @F16model

 ![201115 FFlow F16model 01](https://foil.zone/uploads/default/original/3X/c/a/ca09e49d5945cc4e5f798de2a346f5680e3d3fd0.jpeg)

 ![2011 f16model FFlow design comment](https://foil.zone/uploads/default/original/3X/8/4/8404cff9a04684fbdf731add6bd86f8f3314ba80.jpeg)

 ![2009g F16Model done](https://foil.zone/uploads/default/original/3X/0/a/0a129b70bf67e1f8bb17fd95600027fb162280a5.jpeg)

---

_[View the full topic](https://foil.zone/t/build-from-podolsk-russia/14833)._