# Build using pacificmeister files

**URL:** https://foil.zone/t/build-using-pacificmeister-files/2862
**Category:** Builds
**Created:** [September 10, 2018, 2:54am UTC](https://foil.zone/t/build-using-pacificmeister-files/2862 "2018-09-10T02:54:56Z")
**Posts on this page:** 2
**Page:** 1

<div class="post-metadata">

### Author: ![Dandydan](https://foil.zone/letter_avatar_proxy/v4/letter/d/a9a28c/32.png) [@Dandydan](https://foil.zone/u/Dandydan)
#### Post date: [September 10, 2018, 2:54am UTC](https://foil.zone/t/build-using-pacificmeister-files/2862/1 "2018-09-10T02:54:57Z")

</div>

Hey guys I decided to dust off my 3d printer and I’m going to be using pacificmeister files I will post pictures. Right now I’m just messing with the printer trying to fine tune it and try to get the quality that this build needs. I will be posting pictures and let you guys know how the build is going.

 ![image](https://efoil.builders/uploads/default/original/2X/6/6bef59f0fcc5a6e1afb916ad955a6a9f2568347e.jpeg) ![image](https://efoil.builders/uploads/default/original/2X/5/5c8c53d7b30d0e3b646be1b5077394a5aadf7dc4.jpeg) ![image](https://efoil.builders/uploads/default/original/2X/c/cf97afd4a7c16aeb005014c19b69cd4d3653b8dc.jpeg)

---

<div class="post-metadata">

### Author: ![Dandydan](https://foil.zone/letter_avatar_proxy/v4/letter/d/a9a28c/32.png) [@Dandydan](https://foil.zone/u/Dandydan)
#### Post date: [September 10, 2018, 5:53am UTC](https://foil.zone/t/build-using-pacificmeister-files/2862/2 "2018-09-10T05:53:10Z")

</div>

![image](https://efoil.builders/uploads/default/original/2X/1/1575c2daf0220620f24408430598f80c74154546.jpeg)