# Complete Motor Mast unit, high end like Liftfoils and usable with all VESC!

**URL:** https://foil.zone/t/complete-motor-mast-unit-high-end-like-liftfoils-and-usable-with-all-vesc/11025
**Category:** Buy & Sell
**Created:** [November 25, 2020, 12:49pm UTC](https://foil.zone/t/complete-motor-mast-unit-high-end-like-liftfoils-and-usable-with-all-vesc/11025 "2020-11-25T12:49:51Z")
**Posts on this page:** 3
**Page:** 1

<div class="post-metadata">

### Author: ![flyer](https://foil.zone/letter_avatar_proxy/v4/letter/f/51bf81/32.png) [@flyer](https://foil.zone/u/flyer)
#### Post date: [November 25, 2020, 12:49pm UTC](https://foil.zone/t/complete-motor-mast-unit-high-end-like-liftfoils-and-usable-with-all-vesc/11025/1 "2020-11-25T12:49:51Z")

</div>

selling a brandnew efoil motor unit with mast. It is the Liftfoil Motor as you can see, just with standard LF mast. It can be used with all VESC or ESC and is acutally the best motor unit on the market with about 4000units sold.  
Ready to install and watercooling pipe is prepared as well. However if you don`t want to foil >35km/h you won` t need it…  
Make me an offer for this new masterpiece, but should be above 1679€ +shipping …

 ![e25b08f0fcdb65c0ae76da25a81c3ccc7ddc6093_2_450x750](https://foil.zone/uploads/default/original/3X/8/8/88fe9d5ec6f3e282407f0b74b6a57abdc08bba9b.jpeg)

---

<div class="post-metadata">

### Author: ![Dr4lex](https://foil.zone/letter_avatar_proxy/v4/letter/d/df788c/32.png) [@Dr4lex](https://foil.zone/u/Dr4lex)
#### Post date: [June 28, 2021, 12:07am UTC](https://foil.zone/t/complete-motor-mast-unit-high-end-like-liftfoils-and-usable-with-all-vesc/11025/2 "2021-06-28T00:07:13Z")

</div>

hey have you sold ths mast yet?

---

<div class="post-metadata">

### Author: ![tosh.jah](https://foil.zone/user_avatar/foil.zone/tosh.jah/32/31884_2.png) [@tosh.jah](https://foil.zone/u/tosh.jah)
#### Post date: [June 28, 2021, 5:34am UTC](https://foil.zone/t/complete-motor-mast-unit-high-end-like-liftfoils-and-usable-with-all-vesc/11025/3 "2021-06-28T05:34:06Z")

</div>

Hey Alex,  
I’ve bought the unit and installed it on my V1 board. It’s working like a charm!

> [@Tobi's build from Berlin](https://foil.zone/t/tobis-build-from-berlin/12585):
>
> Hey guys, First of all i want to thank @pacificmeister to start this forum, you have created a great source of inspiration! Then thanks to those i’ve gotten a lot of ideas from, @Wardy & @edivory i’ve copied a lot of your solutions. @Flightjunkie , thanks for bringing CorrosionX into my life slight_smile and your Remote Hack, @michion thanks for your amazing seal! Congratulations for @Flying_Rodeo for your brilliant Motor and @kiterr for your amazing Wings. As well as i want to shout out …

I wish you good luck in finding another FR Unit! Otherwise you could be looking into the 6516x motors, a lot of people here use that one successfully and it’s the next best inrunner available!