# Configure a FSESC Flipsky 75200 75V

**URL:** https://foil.zone/t/configure-a-fsesc-flipsky-75200-75v/12912
**Category:** Electronics (ESC, remote, batteries)
**Created:** [June 17, 2021, 4:05pm UTC](https://foil.zone/t/configure-a-fsesc-flipsky-75200-75v/12912 "2021-06-17T16:05:34Z")
**Posts on this page:** 1
**Showing post:** 2

<div class="post-metadata">

### Author: ![Kian](https://foil.zone/user_avatar/foil.zone/kian/32/12789_2.png) [@Kian](https://foil.zone/u/Kian)
#### Post date: [June 17, 2021, 9:01pm UTC](https://foil.zone/t/configure-a-fsesc-flipsky-75200-75v/12912/2 "2021-06-17T21:01:35Z")

</div>

This might help.  
It did for me

> [@VESC Tool thread - how to program](https://foil.zone/t/vesc-tool-thread-how-to-program/9670):
>
> I’m starting this thread to make it easier for people to get on the water quickly with one of the proven designs here. (6515X motor, Maytech V2 remote. Flipsky 200 or 300A ESC). With this setup readily available, this should be almost “plug and play” from a builders perspective, yet it’s not. One of the areas that I have spent a lot of time on (read: wasted my time) was programming the ESC. I am hardly an expert but here are some basics for somebody who is looking for help in this area. Pl…

---

_[View the full topic](https://foil.zone/t/configure-a-fsesc-flipsky-75200-75v/12912)._