# Connect the cables

**URL:** https://foil.zone/t/connect-the-cables/13850
**Category:** Electronics (ESC, remote, batteries)
**Tags:** vesc, safety
**Created:** [September 6, 2021, 10:51am UTC](https://foil.zone/t/connect-the-cables/13850 "2021-09-06T10:51:54Z")
**Posts on this page:** 1
**Showing post:** 4

<div class="post-metadata">

### Author: ![Cid156](https://foil.zone/letter_avatar_proxy/v4/letter/c/3e96dc/32.png) [@Cid156](https://foil.zone/u/Cid156)
#### Post date: [September 8, 2021, 10:40am UTC](https://foil.zone/t/connect-the-cables/13850/4 "2021-09-08T10:40:09Z")

</div>

> [@kowat](#):
>
> esc hi200

Between ESC and motor

> [@DIY - budget - high amp waterproof connectors](https://foil.zone/t/diy-budget-high-amp-waterproof-connectors/5607/27):
>
> I use these. Perfect for a xt150. Bit tight for a AS150 but could make them work if you had to. You just take out the connector bit in the middle leaving room for the xt150. Compact at 54mm x 17mm and IP68 rated. [https://www.aliexpress.com/item/32951162004.html](https://www.aliexpress.com/item/32951162004.html)

Between battery and motor I removed all the XT90 (Flipsky 200A) and I crimped all together

---

_[View the full topic](https://foil.zone/t/connect-the-cables/13850)._