# Daniel's 2nd build

**URL:** https://foil.zone/t/daniels-2nd-build/19956
**Category:** Build, Repair & Mod
**Tags:** wing, board, xps, cfk, mast
**Created:** [January 7, 2024, 11:07pm UTC](https://foil.zone/t/daniels-2nd-build/19956 "2024-01-07T23:07:43Z")
**Posts on this page:** 1
**Showing post:** 18

<div class="post-metadata">

### Author: ![sat\_be](https://foil.zone/user_avatar/foil.zone/sat_be/32/35523_2.png) [@sat\_be](https://foil.zone/u/sat_be)
#### Post date: [July 23, 2024, 9:04pm UTC](https://foil.zone/t/daniels-2nd-build/19956/18 "2024-07-23T21:04:06Z")

</div>

Batteries  
I built two 14S11P Split Packs, one with Molicel P42A and one with P45B. To make them fit the through the screw hatch, I used a offset pattern for cell arrangement. I designed an Printed the cell holders and end caps. 7S is a bit more tricky than 6 (or 8S), as one of the busbars has to be at the bottom of the pack. I used 0.2mm nickel strips to spot weld the packs. Terminal leads are 6AWG with QS8 antispark connectors. I also put an ntc inside to log the battery temp (connects to motor temp input of vesc and logs as motor temp in metr).

 ![IMG_4854](https://foil.zone/uploads/default/original/3X/e/0/e0dd78672e8e15ad78c6d10f4e94fb91cd960b2f.jpeg)

 ![IMG_4930](https://foil.zone/uploads/default/original/3X/7/2/727f9557b6a6584345aeb18cebe028cd5083dd9d.jpeg)

 ![IMG_4928](https://foil.zone/uploads/default/original/3X/5/c/5c810717fd6eb5c70d9a9b35c4af7da3b9b13465.jpeg)

 ![IMG_4939](https://foil.zone/uploads/default/original/3X/1/4/141e55d15a3340449c12f177478e788ac6db1ac0.jpeg)

 ![IMG_4943](https://foil.zone/uploads/default/original/3X/2/8/28007726a659ae3d2e5dab827c4ddbaafd6d5303.jpeg)

 ![IMG_4948](https://foil.zone/uploads/default/original/3X/b/6/b6a76d4f5fc712b50b82c751bfd8cbcca0ed0b72.jpeg)

I didn’t like the way the strip got bent to the poles of the cells so I built a 3D printed press template to create a recess.

---

_[View the full topic](https://foil.zone/t/daniels-2nd-build/19956)._