# Daniels assist (3rd build) **URL:** https://foil.zone/t/daniels-assist-3rd-build/26503 **Category:** Builds **Created:** [May 27, 2026, 10:19pm UTC](https://foil.zone/t/daniels-assist-3rd-build/26503 "2026-05-27T22:19:21Z") **Posts on this page:** 1 **Showing post:** 16
### Author: ![sat\_be](https://foil.zone/user_avatar/foil.zone/sat_be/32/35523_2.png) [@sat\_be](https://foil.zone/u/sat_be) #### Post date: [September 5, 2026, 9:29am UTC](https://foil.zone/t/daniels-assist-3rd-build/26503/16 "2026-09-05T09:29:39Z")
5085 2 blade folding prop (Kalmar) Built a 2 blade folding assist motor from a 5085 outrunner. I also designed a 3 blade hub but I think the FD blades are too big for a 3 blade prop for this small motor. Shorter blades should work in a 3 blade configuration. The pod is fom the model bolow, I just added the TPU insert for the gong v3 15mm HDM mast. Thanks @nicolasLGM > [@Ultimate foil assist for waves](https://foil.zone/t/ultimate-foil-assist-for-waves/26268/67): > > Hi, of course, [3D design POD 5085 flipsky gong 14mm TPU - Tinkercad](https://www.tinkercad.com/things/lU9LCG75Bos-pod-5085-flipsky-gong-14mm-tpu?sharecode=6sztQ5GiTKW5rbrc-HxX4wkGqbnCiA6mJ9aBHAclZYU) I ended up printing the strap from TPU85A, the cut rubber strap was not strong enough. I tested it on 90l DW board with a gong veloce H V3 XL (1150 cm2). No problem to get on foil in flat water (73kg rider). Vesc settings: battery current max: 75A Phase max: 75A Phase abs max: 100A Battery RS50 12S2P ![IMG_0577](https://foil.zone/uploads/default/original/3X/1/c/1c94811f9468525d25f1ddbe6f43230fb71acb54.jpeg) ![IMG_0580](https://foil.zone/uploads/default/original/3X/9/f/9fa8d108def6553287fc578643ad46f8d88487a2.jpeg) ![IMG_0579](https://foil.zone/uploads/default/original/3X/6/c/6cc3d93821fa2168af9ff1f4e3687c9593e9e4e5.jpeg) ![IMG_0578](https://foil.zone/uploads/default/original/3X/4/6/4632e0e3ff3ba1cd8267c1576a7a8c76aa69a9cd.jpeg) ![IMG_0622](https://foil.zone/uploads/default/original/3X/8/b/8b034f514e8b92cec72779d5e28927e7af44d97c.jpeg) ![IMG_0625](https://foil.zone/uploads/default/original/3X/a/a/aa6bab3fa808e3e5f5c9e97ed451e69c9a240308.jpeg) --- _[View the full topic](https://foil.zone/t/daniels-assist-3rd-build/26503)._