# Database for mast & plate
**URL:** https://foil.zone/t/database-for-mast-plate/6820
**Category:** Foils & Boards
**Created:** [February 5, 2020, 8:31pm UTC](https://foil.zone/t/database-for-mast-plate/6820 "2020-02-05T20:31:43Z")
**Posts on this page:** 20
**Page:** 1
### Author:  [@SUP-MIKE](https://foil.zone/u/SUP-MIKE)
#### Post date: [February 5, 2020, 8:31pm UTC](https://foil.zone/t/database-for-mast-plate/6820/1 "2020-02-05T20:31:43Z")
Hello to everyone,
it would be great to have a database were we can share infos - masts and mastplates are quite different - so I will start with these mastplates:
**FANATIC - 2019** 2020 has another size - not easy to disassemble because mast is glued in plate
**RLboard**
**Slingshot**
So Slingshot has 160 mm and the others 165 mm - what has Gong, Liquid Force and all the others?
Mike
---
### Author:  [@SUP-MIKE](https://foil.zone/u/SUP-MIKE)
#### Post date: [February 7, 2020, 8:10am UTC](https://foil.zone/t/database-for-mast-plate/6820/2 "2020-02-07T08:10:47Z")
Hello to everyone,
I can’t believe that nobody has other mastplates - so get up to the keyboard and let us know the dimensions 🏄♂️
Mike
---
### Author:  [@Foxyirish1987](https://foil.zone/u/Foxyirish1987)
#### Post date: [February 7, 2020, 8:31am UTC](https://foil.zone/t/database-for-mast-plate/6820/3 "2020-02-07T08:31:41Z")
I really hope people jump on this as I need a mast plate for my Windknife FF13 Mast and a ready made solution would be ideal.
---
### Author:  [@SUP-MIKE](https://foil.zone/u/SUP-MIKE)
#### Post date: [February 7, 2020, 8:45am UTC](https://foil.zone/t/database-for-mast-plate/6820/4 "2020-02-07T08:45:19Z")
> [@Foxyirish1987](#):
>
> I need a mast plate for my Windknife FF13 Mast
Hi Luke,
do you think this mast is stable enough and already tested? I have managed to bend a slingshot mast 👹
Because they don’t offer a mastplate I think you have to make it by yourself - to have no threads makes it not easier…
Mike
---
### Author:  [@Jezza](https://foil.zone/u/Jezza)
#### Post date: [February 7, 2020, 8:51am UTC](https://foil.zone/t/database-for-mast-plate/6820/5 "2020-02-07T08:51:20Z")
How did you bend it?
---
### Author:  [@nice2cu](https://foil.zone/u/nice2cu)
#### Post date: [February 7, 2020, 8:53am UTC](https://foil.zone/t/database-for-mast-plate/6820/6 "2020-02-07T08:53:22Z")
Gong:
Mast:
---
### Author:  [@SUP-MIKE](https://foil.zone/u/SUP-MIKE)
#### Post date: [February 7, 2020, 9:06am UTC](https://foil.zone/t/database-for-mast-plate/6820/7 "2020-02-07T09:06:49Z")
> [@Jezza](#):
>
> How did you bend it?
Hi Jeremy,
I’m not sure because I notice it after foiling - either in the event of a fall or when lifting in or out 😭
Mike
---
### Author:  [@SUP-MIKE](https://foil.zone/u/SUP-MIKE)
#### Post date: [February 7, 2020, 9:09am UTC](https://foil.zone/t/database-for-mast-plate/6820/8 "2020-02-07T09:09:57Z")
> [@nice2cu](#):
>
> Gong:
Hi Robert,
great - why can the dimensions not be uniform 😠 makes it not easier for us.
Mike
---
### Author:  [@Foxyirish1987](https://foil.zone/u/Foxyirish1987)
#### Post date: [February 7, 2020, 9:37am UTC](https://foil.zone/t/database-for-mast-plate/6820/9 "2020-02-07T09:37:39Z")
Time will tell I guess but I’ve suspended it between 2 timber blocks and stood on it and no deformation
---
### Author:  [@Sliman\_O](https://foil.zone/u/Sliman_O)
#### Post date: [February 7, 2020, 10:13am UTC](https://foil.zone/t/database-for-mast-plate/6820/10 "2020-02-07T10:13:48Z")
Hi Mike,
This is all about mast plates ? How is the mast profile itself on all these models ? I mean is it different ? I’d rather want to test a DIY route for the mast too.
---
### Author:  [@SUP-MIKE](https://foil.zone/u/SUP-MIKE)
#### Post date: [February 7, 2020, 10:25am UTC](https://foil.zone/t/database-for-mast-plate/6820/11 "2020-02-07T10:25:46Z")
> [@Sliman\_O](#):
>
> This is all about mast plates ? How is the mast profile itself on all these models ? I mean is it different ?
Hi Souleiman,
you are right - the mast are also very different and almost only fit to the mast plate of the same manufacturer - in addition the profiles change from year to year.
And besides, you can’t get STEP from the manufacturers - so you have to measure and draw yourself.
I will add the mast profiles soon.
---
### Author:  [@Jezza](https://foil.zone/u/Jezza)
#### Post date: [February 7, 2020, 10:36am UTC](https://foil.zone/t/database-for-mast-plate/6820/12 "2020-02-07T10:36:39Z")
Most likely a fall where you hit the board. It tends to put a lot of pressure and create a folding point.
---
### Author:  [@SoEFoil](https://foil.zone/u/SoEFoil)
#### Post date: [February 7, 2020, 10:41am UTC](https://foil.zone/t/database-for-mast-plate/6820/13 "2020-02-07T10:41:53Z")
Does sbdy has the Axis plate specs ?
For compatibility purpose, IMHO there is also the mast chord/mast thickness data that are important. Strangely, the 90 x 165ish not so much as most of the times, holes can be modified in alu plates to gain a few mm to fit the board hole pattern. Second point, with US rails, the longer plate dimension (+/- 165mm) data is irrelevant since you have a sliding plate.
So in mm, chord length / profile thickness / Nb screws -diam- screw spacing
Please everybody confirm:
Axis: 119 / 18.85 / 2xM8 60mm apart
Airush: should be like Gong (to be confirmed)
Gong: 109.5 / 14.7 / 3xM6 40mm apart
Mantafoils: ? / ? / 2xM8 40mm apart (should be the same as Zeeko)
Naish: 110 / 14.7 then 15.3 / 3xM6 40mm apart \_\_\_\_\_\_\_\_==== Beware: Gong compatible in 2018 not from 2019 (15.3mm)
RL: 115 / 15 / 2xM8 60mm apart
RRD: should be Gong compatible
Slingshot: 114 / ? / 2xM8 51mm apart
Takuma: 109.5 / 14. **9** / 3xM6 40mm apart (Gong press fit compatible)
Zeeko: Mantafoils: ? / ? / 2xM8 40mm apart (should be the same as Mantafoils)
ZJ sport from Ali:
---
### Author:  [@Sliman\_O](https://foil.zone/u/Sliman_O)
#### Post date: [February 7, 2020, 10:48am UTC](https://foil.zone/t/database-for-mast-plate/6820/14 "2020-02-07T10:48:02Z")
So they are still testing mast profiles from year to year ? I thought they would stick to a proven one…
Also, I thought they all were using a few profiles models for the mast. Been searching for this topic but couldn’t find any profile reference related to NACA…
> [@SUP-MIKE](#):
>
> I will add the mast profiles soon.
Thx 🙂
---
### Author:  [@SUP-MIKE](https://foil.zone/u/SUP-MIKE)
#### Post date: [February 7, 2020, 12:42pm UTC](https://foil.zone/t/database-for-mast-plate/6820/15 "2020-02-07T12:42:27Z")
> [@Sliman\_O](#):
>
> So they are still testing mast profiles from year to year ?
Fanatic has changed and also Indiana - hope others will keep it as it is 🤞
> [@Sliman\_O](#):
>
> I will add the mast profiles soon.
I added the mast profiles to the first post…
Mike
---
### Author:  [@Sliman\_O](https://foil.zone/u/Sliman_O)
#### Post date: [February 7, 2020, 1:52pm UTC](https://foil.zone/t/database-for-mast-plate/6820/16 "2020-02-07T13:52:03Z")
> [@SUP-MIKE](#):
>
> I added the mast profiles to the first post…
Thank you Mike ! Would be easier for everybody to find all info regarding mast & plate on the same thread 🙂
So, I did a few research, and just like I thought, they basically all use the same NACA profile. Here they are :
NACA0010 :
NACA0012 :
Sauce :
[https://kiteforum.com/viewtopic.php?t=2396640](https://kiteforum.com/viewtopic.php?t=2396640)
---
### Author:  [@SUP-MIKE](https://foil.zone/u/SUP-MIKE)
#### Post date: [February 7, 2020, 2:04pm UTC](https://foil.zone/t/database-for-mast-plate/6820/17 "2020-02-07T14:04:41Z")
> [@Sliman\_O](#):
>
> Thank you Mike ! Would be easier for everybody to find all info regarding mast & plate on the same thread 🙂
Was happy to do it - that’s the reason I put it in the first post
I think in terms of efficiency the mast profile is not really decisive - the stability and the space for the cables is more important for us.
---
### Author:  [@Sliman\_O](https://foil.zone/u/Sliman_O)
#### Post date: [February 29, 2020, 3:28pm UTC](https://foil.zone/t/database-for-mast-plate/6820/18 "2020-02-29T15:28:22Z")
Do you have the 3D drawing or drawn 2d profile of the slingshot mast ? I need it for my mast clamp. Would be appreciated 🙂
---
### Author:  [@windknife](https://foil.zone/u/windknife)
#### Post date: [February 29, 2020, 7:53pm UTC](https://foil.zone/t/database-for-mast-plate/6820/19 "2020-02-29T19:53:31Z")
Hi, I have had a few people come to me to purchase my Windknife FF13 and I was wondering what I could do to help this community. This post seems like the right place to start. What would you like from a mast plate, is there a standard size and hole spacing you need?
Cheers
Gareth
> **[Google Sites: Sign-in](https://accounts.google.com/v3/signin/identifier?continue=https%3A%2F%2Fsites.google.com%2Fsite%2Fsites%2Fsystem%2Ferrors%2FProxiedWebspaceNotFound%3Fhost%3Dwww.windknife.com%26webspace%3Dwindknifecom&followup=https%3A%2F%2Fsites.google.com%2Fsite%2Fsites%2Fsystem%2Ferrors%2FProxiedWebspaceNotFound%3Fhost%3Dwww.windknife.com%26webspace%3Dwindknifecom&ifkv=AVQVeyzi6UjM5P83R8y5oQoHVlzSnybEq8JcPh7vu6cnPEPtY4pRE8oiDEIFLhSZG_k4cLEsMnNU5A&passive=1209600&service=jotspot&flowName=GlifWebSignIn&flowEntry=ServiceLogin&dsh=S-351768202%3A1699934883543483&theme=glif)**
>
> Access Google Sites with a personal Google account or Google Workspace account (for business use).
---
### Author:  [@windknife](https://foil.zone/u/windknife)
#### Post date: [February 29, 2020, 7:54pm UTC](https://foil.zone/t/database-for-mast-plate/6820/20 "2020-02-29T19:54:47Z")
Someone mentioned that they wanted a way of adding threads to the FF13 mast, I usually do that using cross dowels.
[Next page](https://foil.zone/t/database-for-mast-plate/6820.md?page=2)