# Direct drive outrunner with direct water cooling

**URL:** https://foil.zone/t/direct-drive-outrunner-with-direct-water-cooling/570
**Category:** Propulsion System (Motor, Gears)
**Created:** [November 5, 2017, 11:43pm UTC](https://foil.zone/t/direct-drive-outrunner-with-direct-water-cooling/570 "2017-11-05T23:43:40Z")
**Posts on this page:** 1
**Showing post:** 231

<div class="post-metadata">

### Author: ![VeFoil](https://foil.zone/user_avatar/foil.zone/vefoil/32/4952_2.png) [@VeFoil](https://foil.zone/u/VeFoil)
#### Post date: [July 4, 2018, 11:18am UTC](https://foil.zone/t/direct-drive-outrunner-with-direct-water-cooling/570/231 "2018-07-04T11:18:38Z")

</div>

I have no doubt you will need a board that is 28+" wide, and it must be wide at the back to get planing, that board will plow the tail through the water and prevent you from getting up on foil most likely. But if you have not tried it, test it out first, your only 72kg, thats lot lighter than me 115kg 🙂

---

_[View the full topic](https://foil.zone/t/direct-drive-outrunner-with-direct-water-cooling/570)._