# DIY 6384 Foil Drive Assist from South Germany

**URL:** https://foil.zone/t/diy-6384-foil-drive-assist-from-south-germany/19307
**Category:** Build, Repair & Mod
**Created:** [October 10, 2023, 7:19am UTC](https://foil.zone/t/diy-6384-foil-drive-assist-from-south-germany/19307 "2023-10-10T07:19:33Z")
**Posts on this page:** 1
**Showing post:** 134

<div class="post-metadata">

### Author: ![hangloose](https://foil.zone/user_avatar/foil.zone/hangloose/32/29329_2.png) [@hangloose](https://foil.zone/u/hangloose)
#### Post date: [December 9, 2023, 12:05pm UTC](https://foil.zone/t/diy-6384-foil-drive-assist-from-south-germany/19307/134 "2023-12-09T12:05:31Z")

</div>

Yesterday evening I finished my LMT-6 connector including seals.  
This morning I was in our outdoor pool for the first test run. Everything worked as it should.  
I measured the currents. I will replace the MTW-60 connections on my cables with the LMT-6 since a maximum of 100A phase current on the motor is borderline in the long run.  
I’m so happy to have the Flydragon 150A.  
Just plug it in and have fun. The heat sink remained lukewarm during the test.

 ![IMG_7145](https://foil.zone/uploads/default/original/3X/6/4/6422963ea6c038278b605e9e65332e9e4db993fa.jpeg)

 ![IMG_7146](https://foil.zone/uploads/default/original/3X/5/1/51adf5363b2a78d7b8abc8f72f8f26e78e29f8d2.jpeg)

 ![IMG_7147](https://foil.zone/uploads/default/original/3X/e/3/e3fc5496294da409b89dcb598ff72562a2605aa1.jpeg)

 ![IMG_7150](https://foil.zone/uploads/default/original/3X/0/2/028d9e3d6f70c2db9aa02d39adab221171b0ad6e.jpeg)

 ![IMG_7151](https://foil.zone/uploads/default/original/3X/b/5/b5f766cde8eb70b2ea25d8a3ca86f157550c6f41.jpeg)

 ![IMG_7152](https://foil.zone/uploads/default/original/3X/c/f/cf606052b5af418394d72a4471da94680a66f2f4.jpeg)

 ![IMG_7153](https://foil.zone/uploads/default/original/3X/2/5/25bf0430a123eb1ab4c43f8a89523bcda66cce23.jpeg)

 ![IMG_7154](https://foil.zone/uploads/default/original/3X/3/7/376d571d694cb2ae81bcd1af119a134619383d63.jpeg)

 ![IMG_7155](https://foil.zone/uploads/default/original/3X/b/2/b2f178009edfe74a5be500e30215c8f3d185fe77.jpeg)

 ![IMG_7157](https://foil.zone/uploads/default/original/3X/0/b/0b69f15b6c91371a4f65e05549a07c1e31cc23be.jpeg)

---

_[View the full topic](https://foil.zone/t/diy-6384-foil-drive-assist-from-south-germany/19307)._