# DIY lid for the electronics

**URL:** https://foil.zone/t/diy-lid-for-the-electronics/3837
**Category:** Builds
**Created:** [February 21, 2019, 2:15pm UTC](https://foil.zone/t/diy-lid-for-the-electronics/3837 "2019-02-21T14:15:36Z")
**Posts on this page:** 1
**Showing post:** 37

<div class="post-metadata">

### Author: ![Riwi](https://foil.zone/user_avatar/foil.zone/riwi/32/20684_2.png) [@Riwi](https://foil.zone/u/Riwi)
#### Post date: [April 13, 2019, 7:09pm UTC](https://foil.zone/t/diy-lid-for-the-electronics/3837/37 "2019-04-13T19:09:22Z")

</div>

Made a 15 minute run today, couldn’t go longer because my hands were freezing.

Took some pictures with the flir after the run and everything is holding up fine. Ubec hade the highest temp, 22 degrees C. Seaking 19 degrees C.

Really impressed by the Kia Soul cells. Only 13 degrees after 15 minutes of riding.

 ![image](https://efoil.builders/uploads/default/original/2X/a/a5c15792726b30f8fe9f0fc458469fa495606ecf.jpeg)

---

_[View the full topic](https://foil.zone/t/diy-lid-for-the-electronics/3837)._