# DiY monofoil (Flying wing) efoils

**URL:** https://foil.zone/t/diy-monofoil-flying-wing-efoils/17271
**Category:** Foils & Boards
**Created:** [January 8, 2023, 1:24pm UTC](https://foil.zone/t/diy-monofoil-flying-wing-efoils/17271 "2023-01-08T13:24:13Z")
**Posts on this page:** 1
**Showing post:** 14

<div class="post-metadata">

### Author: ![SoEFoil](https://foil.zone/user_avatar/foil.zone/soefoil/32/55_2.png) [@SoEFoil](https://foil.zone/u/SoEFoil)
#### Post date: [March 15, 2023, 7:35am UTC](https://foil.zone/t/diy-monofoil-flying-wing-efoils/17271/14 "2023-03-15T07:35:38Z")

</div>

To learn how to make composites from a 3D printed mold, there is @visor360 post :

> [@New build from 3D printed molds (very low cost, but high performance !)](https://foil.zone/t/new-build-from-3d-printed-molds-very-low-cost-but-high-performance/6031):
>
> Hi everybody! I’m sharing with you my build. It is not finished yet … I started this project around 9 months ago, most of the work was the designs, simulations, testing and optimization (building one is quite easy and fast). Summary 3D printed mold for wings, mast and fuselage 3d printed molds Wings Mast and fuselage Board Electronics Conclusion 3D printed mold for wings, mast and fuselage Those part are full carbon fiber and fiberglass and very inexpensive! There is no 3d …

pointing to his site where access should be free (correct me if I’m wrong):  
[https://make3dcomposites.thinkific.com/](https://make3dcomposites.thinkific.com/)

---

_[View the full topic](https://foil.zone/t/diy-monofoil-flying-wing-efoils/17271)._