# ECAD in Fusion 360 - Designing an Efoil ESC

**URL:** https://foil.zone/t/ecad-in-fusion-360-designing-an-efoil-esc/9716
**Category:** Electronics (ESC, remote, batteries)
**Created:** [September 13, 2020, 9:24pm UTC](https://foil.zone/t/ecad-in-fusion-360-designing-an-efoil-esc/9716 "2020-09-13T21:24:17Z")
**Posts on this page:** 1
**Showing post:** 16

<div class="post-metadata">

### Author: ![SoEFoil](https://foil.zone/user_avatar/foil.zone/soefoil/32/55_2.png) [@SoEFoil](https://foil.zone/u/SoEFoil)
#### Post date: [November 17, 2020, 1:02am UTC](https://foil.zone/t/ecad-in-fusion-360-designing-an-efoil-esc/9716/16 "2020-11-17T01:02:34Z")

</div>

[Off-Topic]  
The guys who fly below 20A aren’t looking for speed,

- they fly without duct,
- they use a large wing like the RL optimised front Wing or a Gong Rise XL (@jeffM) or Veloce (thinner so lower drag but a bit more difficult at the beginning). A high aspect windsurf wing would do the job too.
- they use an optimized prop like the Flying Rodeo one or a customized 10usd cut down Yamaha clone (184mm to 130ish) like JeffM

> [@Efoil V3 - STL files for Gong foil and Flipsky motor 12mm - Parts list - Schematics](https://foil.zone/t/efoil-v3-stl-files-for-gong-foil-and-flipsky-motor-12mm-parts-list-schematics/9610/19):
>
> Test new prop shape today 18A vs 23A old shape. Very nice slight_smile but I have some whistling

---

_[View the full topic](https://foil.zone/t/ecad-in-fusion-360-designing-an-efoil-esc/9716)._