# Efoil V3 - STL files for Gong foil and Flipsky motor 12mm - Parts list - Schematics

**URL:** https://foil.zone/t/efoil-v3-stl-files-for-gong-foil-and-flipsky-motor-12mm-parts-list-schematics/9610
**Category:** Builds
**Created:** [September 6, 2020, 9:21pm UTC](https://foil.zone/t/efoil-v3-stl-files-for-gong-foil-and-flipsky-motor-12mm-parts-list-schematics/9610 "2020-09-06T21:21:59Z")
**Posts on this page:** 20
**Page:** 1

<div class="post-metadata">

### Author: ![jeffM](https://foil.zone/user_avatar/foil.zone/jeffm/32/82_2.png) [@jeffM](https://foil.zone/u/jeffM)
#### Post date: [September 6, 2020, 9:21pm UTC](https://foil.zone/t/efoil-v3-stl-files-for-gong-foil-and-flipsky-motor-12mm-parts-list-schematics/9610/1 "2020-09-06T21:21:59Z")

</div>

Presentation of my last efoil, this is my third efoil.  
The goal was on this model to make it simple and fast and to be able to use the aircraft in wingfoil and Efoil.  
it works very well, the front wing is very easy to ride and consumes only 23A (foil out of the water)  
description:  
Motor 120kv flipsky, VESC6 flipsky, remote mayteck V2, foil gong XL curve, board homemade in carbon, battery 12S 22000 mah, and water pump 5V

[![](https://img.youtube.com/vi/StjQPc-yYrs/maxresdefault.jpg "E-foil V3 (monteynard sep 2020)") ](https://www.youtube.com/watch?v=StjQPc-yYrs)

[![](https://img.youtube.com/vi/qUiklsb_Kao/maxresdefault.jpg "Efoil V3 suite") ](https://www.youtube.com/watch?v=qUiklsb_Kao)

 ![117915163_10223248577673066_377004199990152780_o](https://foil.zone/uploads/default/original/2X/6/6daefbb415213b18ec8f6283eae78dc63ea90938.jpeg)  
 ![118764808_3687211131289692_3238803222339014529_o](https://foil.zone/uploads/default/original/2X/a/a6d24e9efc5f05d96a640ce57933c51e1fd02c60.jpeg) ![118826150_3687210607956411_5181460444045886012_o](https://foil.zone/uploads/default/original/2X/c/cfa55e3ce5884416d1ecac78af3b84264372f9c6.jpeg) ![P1060155](https://foil.zone/uploads/default/original/2X/a/adb86c06f41ff82a06119dd1514cf4afd04c9125.jpeg)

 ![P1060158](https://foil.zone/uploads/default/original/2X/3/3c52ed87dcc595c85251d20438d8202d539545a4.jpeg)

and my two previous version

 ![P1060193](https://foil.zone/uploads/default/original/2X/7/767bad16a872149b8734905d730d8c62a34034b9.jpeg)

---

<div class="post-metadata">

### Author: ![DavidF](https://foil.zone/letter_avatar_proxy/v4/letter/d/f07891/32.png) [@DavidF](https://foil.zone/u/DavidF)
#### Post date: [September 7, 2020, 12:41am UTC](https://foil.zone/t/efoil-v3-stl-files-for-gong-foil-and-flipsky-motor-12mm-parts-list-schematics/9610/2 "2020-09-07T00:41:26Z")

</div>

Hey, very cool build and extremely nice video. What prop are you using and how long does the battery last?

---

<div class="post-metadata">

### Author: ![jeffM](https://foil.zone/user_avatar/foil.zone/jeffm/32/82_2.png) [@jeffM](https://foil.zone/u/jeffM)
#### Post date: [September 7, 2020, 7:02am UTC](https://foil.zone/t/efoil-v3-stl-files-for-gong-foil-and-flipsky-motor-12mm-parts-list-schematics/9610/3 "2020-09-07T07:02:46Z")

</div>

Prop flipsky with modification, 45/50 minutes for 75kg

 ![image](https://efoil.builders/uploads/default/original/2X/0/003bfc1d4509aad8386842618c886e956f9fb506.jpeg) ![image](https://efoil.builders/uploads/default/original/2X/f/f629da989ca3631de69e3b11d8381f90723dd650.jpeg)

---

<div class="post-metadata">

### Author: ![zaja.cz](https://foil.zone/user_avatar/foil.zone/zaja.cz/32/8121_2.png) [@zaja.cz](https://foil.zone/u/zaja.cz)
#### Post date: [September 7, 2020, 10:42am UTC](https://foil.zone/t/efoil-v3-stl-files-for-gong-foil-and-flipsky-motor-12mm-parts-list-schematics/9610/4 "2020-09-07T10:42:15Z")

</div>

Beautiful work and beautiful nature. Where is?😍

---

<div class="post-metadata">

### Author: ![mutai](https://foil.zone/letter_avatar_proxy/v4/letter/m/a183cd/32.png) [@mutai](https://foil.zone/u/mutai)
#### Post date: [September 7, 2020, 2:31pm UTC](https://foil.zone/t/efoil-v3-stl-files-for-gong-foil-and-flipsky-motor-12mm-parts-list-schematics/9610/5 "2020-09-07T14:31:40Z")

</div>

Hi J,

Looks amazing with very nice video as well.  
I have 2 questions:

1. Are you using the VESC6 with water cooling? how? can you send some pic of your electronic setup?
2. how did you cut the prop? can share the scheme please?

Thanks,

Eran

---

<div class="post-metadata">

### Author: ![Felixfoiler](https://foil.zone/user_avatar/foil.zone/felixfoiler/32/17401_2.png) [@Felixfoiler](https://foil.zone/u/Felixfoiler)
#### Post date: [September 7, 2020, 4:37pm UTC](https://foil.zone/t/efoil-v3-stl-files-for-gong-foil-and-flipsky-motor-12mm-parts-list-schematics/9610/6 "2020-09-07T16:37:45Z")

</div>

your duct looks very good. Did you laminat it?  
Mine looks like this:

 ![IMG_20200907_193711_943](https://efoil.builders/uploads/default/original/2X/b/b737a73982151d4c30e0ed55e74e761a59a08310.jpeg)

---

<div class="post-metadata">

### Author: ![jeffM](https://foil.zone/user_avatar/foil.zone/jeffm/32/82_2.png) [@jeffM](https://foil.zone/u/jeffM)
#### Post date: [September 7, 2020, 5:23pm UTC](https://foil.zone/t/efoil-v3-stl-files-for-gong-foil-and-flipsky-motor-12mm-parts-list-schematics/9610/7 "2020-09-07T17:23:24Z")

</div>

Monteynard lake in the Alps

---

<div class="post-metadata">

### Author: ![jeffM](https://foil.zone/user_avatar/foil.zone/jeffm/32/82_2.png) [@jeffM](https://foil.zone/u/jeffM)
#### Post date: [September 7, 2020, 5:37pm UTC](https://foil.zone/t/efoil-v3-stl-files-for-gong-foil-and-flipsky-motor-12mm-parts-list-schematics/9610/8 "2020-09-07T17:37:44Z")

</div>

Yes VESC6 with water cooling

 ![IMG_6459](https://efoil.builders/uploads/default/original/2X/7/72dc422f73d2768a88f9c559d881d758bf7ce490.jpeg) ![IMG_6461](https://efoil.builders/uploads/default/original/2X/9/98cb7b073860dd3b8540a03fbc87d13869df7ff9.jpeg) ![IMG_6462](https://efoil.builders/uploads/default/original/2X/2/2c6748196043005b8456f5cc0cf1ea841fe4b40b.jpeg)  
And for the prop I don’t have a shape, I cut it "guesswork " 🙂

The water suction on the nose and the drain

 ![IMG_6465](https://efoil.builders/uploads/default/original/2X/b/b71f0156047bca485c1c1fb9d770bf0cba93cf40.jpeg)  
 ![IMG_6464](https://efoil.builders/uploads/default/original/2X/8/8e9e0d6a56f7a25df70fff2a00c402be38ef7839.jpeg)

---

<div class="post-metadata">

### Author: ![jeffM](https://foil.zone/user_avatar/foil.zone/jeffm/32/82_2.png) [@jeffM](https://foil.zone/u/jeffM)
#### Post date: [September 7, 2020, 5:40pm UTC](https://foil.zone/t/efoil-v3-stl-files-for-gong-foil-and-flipsky-motor-12mm-parts-list-schematics/9610/9 "2020-09-07T17:40:01Z")

</div>

No just printed in PETG

---

<div class="post-metadata">

### Author: ![Felixfoiler](https://foil.zone/user_avatar/foil.zone/felixfoiler/32/17401_2.png) [@Felixfoiler](https://foil.zone/u/Felixfoiler)
#### Post date: [September 7, 2020, 6:13pm UTC](https://foil.zone/t/efoil-v3-stl-files-for-gong-foil-and-flipsky-motor-12mm-parts-list-schematics/9610/10 "2020-09-07T18:13:37Z")

</div>

Mine dissolved without laminating after first run. Please tell me how long yours is keeping up.

---

<div class="post-metadata">

### Author: ![Vitalii](https://foil.zone/letter_avatar_proxy/v4/letter/v/d6d6ee/32.png) [@Vitalii](https://foil.zone/u/Vitalii)
#### Post date: [September 7, 2020, 7:20pm UTC](https://foil.zone/t/efoil-v3-stl-files-for-gong-foil-and-flipsky-motor-12mm-parts-list-schematics/9610/11 "2020-09-07T19:20:34Z")

</div>

23А? - that’s amazing, what peak current you have?  
You have said “Prop flipsky” - that means you have bought it together in bundle for 120kv motor? Or this model of prop for 100kv model?  
What total weight (or w/o battery) of this build?

---

<div class="post-metadata">

### Author: ![jeffM](https://foil.zone/user_avatar/foil.zone/jeffm/32/82_2.png) [@jeffM](https://foil.zone/u/jeffM)
#### Post date: [September 8, 2020, 5:16pm UTC](https://foil.zone/t/efoil-v3-stl-files-for-gong-foil-and-flipsky-motor-12mm-parts-list-schematics/9610/12 "2020-09-08T17:16:10Z")

</div>

here all .stl files for gong mast and flipsky motor 120kv 12mm  
A lot of files found on the forum many thanks at all the community  
and some creation or modification

 ![Capture](https://foil.zone/uploads/default/original/2X/4/4da0a5c0a40d981b2169bad1f0bfc512919a4d53.jpeg)  
[https://drive.google.com/drive/folders/1aCjulHFvo2-rUDIc0xqB1GRqtn8bkWcv?usp=sharing](https://drive.google.com/drive/folders/1aCjulHFvo2-rUDIc0xqB1GRqtn8bkWcv?usp=sharing)

---

<div class="post-metadata">

### Author: ![jeffM](https://foil.zone/user_avatar/foil.zone/jeffm/32/82_2.png) [@jeffM](https://foil.zone/u/jeffM)
#### Post date: [September 8, 2020, 5:32pm UTC](https://foil.zone/t/efoil-v3-stl-files-for-gong-foil-and-flipsky-motor-12mm-parts-list-schematics/9610/13 "2020-09-08T17:32:16Z")

</div>

23A it’s without duct. with the duct : 35 / 37 A  
Yes it’s the prop sell with the 120kv  
Efoil + battery =\> 24 kg

---

<div class="post-metadata">

### Author: ![Vitalii](https://foil.zone/letter_avatar_proxy/v4/letter/v/d6d6ee/32.png) [@Vitalii](https://foil.zone/u/Vitalii)
#### Post date: [September 8, 2020, 5:55pm UTC](https://foil.zone/t/efoil-v3-stl-files-for-gong-foil-and-flipsky-motor-12mm-parts-list-schematics/9610/14 "2020-09-08T17:55:56Z")

</div>

> [@jeffM](#):
>
> 23A it’s without duct. with the duct : 35 / 37 A

In this scenario not amazing, it’s usual, lol 🙂  
I have received email from flipsky about prop.  
They have said that it possible buy prop separately for 120kv model, and that they have developed this prop for 120kv model, but I don’t see any difference with prop for 100kv motor, but we all on this forum knows that prop for 100kv motor required some “fixing” in case 120kv motor

Motor proposed from flipsky as “motor developed for 120kv”  
[https://flipsky.net/collections/accessories/products/aluminum-alloy-propeller-two-stroke-water-cooled-3-5hp-outboard-motor-propeller-for-flipsky-65161?variant=34282105798791](https://flipsky.net/collections/accessories/products/aluminum-alloy-propeller-two-stroke-water-cooled-3-5hp-outboard-motor-propeller-for-flipsky-65161?variant=34282105798791)

the same (?) prop on Banggood

> **[Banggood Sitemap - Wholesale Sitemap - China wholesale](https://www.banggood.com/sitemap.html)**
>
> China wholesale Sitemap, dropshIP wholesale from China, Professional Chinese wholesaler for general merchandise on wholesale price.

I don’t see any difference… and you?

---

<div class="post-metadata">

### Author: ![samisin](https://foil.zone/letter_avatar_proxy/v4/letter/s/90ced4/32.png) [@samisin](https://foil.zone/u/samisin)
#### Post date: [September 9, 2020, 5:03pm UTC](https://foil.zone/t/efoil-v3-stl-files-for-gong-foil-and-flipsky-motor-12mm-parts-list-schematics/9610/15 "2020-09-09T17:03:17Z")

</div>

I was checking mast clamp back and front stl files but I dont see nut placement to tighten mast front and and back part! Wondering how you managed to secure front part to back clamp after screwing motor in the back part

---

<div class="post-metadata">

### Author: ![samisin](https://foil.zone/letter_avatar_proxy/v4/letter/s/90ced4/32.png) [@samisin](https://foil.zone/u/samisin)
#### Post date: [September 9, 2020, 5:06pm UTC](https://foil.zone/t/efoil-v3-stl-files-for-gong-foil-and-flipsky-motor-12mm-parts-list-schematics/9610/16 "2020-09-09T17:06:33Z")

</div>

Now I see how it works! the right question is what is the screw size

---

<div class="post-metadata">

### Author: ![jeffM](https://foil.zone/user_avatar/foil.zone/jeffm/32/82_2.png) [@jeffM](https://foil.zone/u/jeffM)
#### Post date: [September 9, 2020, 5:36pm UTC](https://foil.zone/t/efoil-v3-stl-files-for-gong-foil-and-flipsky-motor-12mm-parts-list-schematics/9610/17 "2020-09-09T17:36:20Z")

</div>

M5 X100

[https://fr.aliexpress.com/item/33007566910.html?spm=a2g0s.9042311.0.0.27426c370XM6he](https://fr.aliexpress.com/item/33007566910.html?spm=a2g0s.9042311.0.0.27426c370XM6he)

---

<div class="post-metadata">

### Author: ![jeffM](https://foil.zone/user_avatar/foil.zone/jeffm/32/82_2.png) [@jeffM](https://foil.zone/u/jeffM)
#### Post date: [September 9, 2020, 5:47pm UTC](https://foil.zone/t/efoil-v3-stl-files-for-gong-foil-and-flipsky-motor-12mm-parts-list-schematics/9610/18 "2020-09-09T17:47:45Z")

</div>

no difference only the shaft

---

<div class="post-metadata">

### Author: ![jeffM](https://foil.zone/user_avatar/foil.zone/jeffm/32/82_2.png) [@jeffM](https://foil.zone/u/jeffM)
#### Post date: [September 9, 2020, 7:17pm UTC](https://foil.zone/t/efoil-v3-stl-files-for-gong-foil-and-flipsky-motor-12mm-parts-list-schematics/9610/19 "2020-09-09T19:17:44Z")

</div>

Test new prop shape today 18A vs 23A old shape. Very nice 🙂 but I have some whistling

 ![IMG_6485](https://efoil.builders/uploads/default/original/2X/6/6bff499624f739532cf3147114a92f39e5e4ffb7.jpeg) ![IMG_6486](https://efoil.builders/uploads/default/original/2X/e/ea1520a644a72d61d27001e998e65641498dc120.jpeg) ![IMG_6487](https://efoil.builders/uploads/default/original/2X/1/19b8e99b8b1b3806aa1f61eae901732443a62b59.jpeg) ![P1010879](https://efoil.builders/uploads/default/original/2X/0/022ff9cd908d435cbf2c4ab43399e157e718c4ed.jpeg)

---

<div class="post-metadata">

### Author: ![Idea](https://foil.zone/user_avatar/foil.zone/idea/32/43433_2.png) [@Idea](https://foil.zone/u/Idea)
#### Post date: [September 10, 2020, 9:13am UTC](https://foil.zone/t/efoil-v3-stl-files-for-gong-foil-and-flipsky-motor-12mm-parts-list-schematics/9610/20 "2020-09-10T09:13:41Z")

</div>

**Great project, Congratulations**

I builds an efoil with a similar setup, currently completing parts

I have a questions … is this an additional capacitor? What are the parameters?

 ![98cb7b073860dd3b8540a03fbc87d13869df7ff9](https://efoil.builders/uploads/default/original/2X/4/45021e55025005cd004c62b88399d4677093581a.jpeg)

What is the diameter of the propeller after modification

[Next page](https://foil.zone/t/efoil-v3-stl-files-for-gong-foil-and-flipsky-motor-12mm-parts-list-schematics/9610.md?page=2)