# Efoil V3 - STL files for Gong foil and Flipsky motor 12mm - Parts list - Schematics
**URL:** https://foil.zone/t/efoil-v3-stl-files-for-gong-foil-and-flipsky-motor-12mm-parts-list-schematics/9610
**Category:** Builds
**Created:** [September 6, 2020, 9:21pm UTC](https://foil.zone/t/efoil-v3-stl-files-for-gong-foil-and-flipsky-motor-12mm-parts-list-schematics/9610 "2020-09-06T21:21:59Z")
**Posts on this page:** 20
**Page:** 2
### Author:  [@Sourcecode](https://foil.zone/u/Sourcecode)
#### Post date: [September 10, 2020, 10:02am UTC](https://foil.zone/t/efoil-v3-stl-files-for-gong-foil-and-flipsky-motor-12mm-parts-list-schematics/9610/21 "2020-09-10T10:02:24Z")
looks like a relay? 2020202020 char
---
### Author:  [@jeffM](https://foil.zone/u/jeffM)
#### Post date: [September 10, 2020, 4:57pm UTC](https://foil.zone/t/efoil-v3-stl-files-for-gong-foil-and-flipsky-motor-12mm-parts-list-schematics/9610/22 "2020-09-10T16:57:55Z")
Yes it’s a relay. it’s my safety system. this relay cut the power when the rider fall.
there is a old post on the forum, where I explain for my 1st e-foil the system.
I don’t remember exacly where
---
### Author:  [@Idea](https://foil.zone/u/Idea)
#### Post date: [September 10, 2020, 7:18pm UTC](https://foil.zone/t/efoil-v3-stl-files-for-gong-foil-and-flipsky-motor-12mm-parts-list-schematics/9610/23 "2020-09-10T19:18:31Z")
Thanks, I found it 🙂
> **[Efoil homemade feedback after 1 year of ride](https://foil.zone/t/efoil-homemade-feedback-after-1-year-of-ride/2962/3)**
>
> I use a kilovac relay and magnetic switch with a little relay for reverse the signal
---
### Author:  [@Noob](https://foil.zone/u/Noob)
#### Post date: [September 10, 2020, 9:15pm UTC](https://foil.zone/t/efoil-v3-stl-files-for-gong-foil-and-flipsky-motor-12mm-parts-list-schematics/9610/24 "2020-09-10T21:15:28Z")
what is the maximum speed you can reach with your board ??
---
### Author:  [@wushbush](https://foil.zone/u/wushbush)
#### Post date: [September 11, 2020, 2:47am UTC](https://foil.zone/t/efoil-v3-stl-files-for-gong-foil-and-flipsky-motor-12mm-parts-list-schematics/9610/26 "2020-09-11T02:47:57Z")
> **[Flipsky FSESC 75200 75V High Current 200A ESC Base On Vesc With Aluminum Case...](https://flipsky.net/collections/electronic-products/products/flipsky-fsesc75200-75v-high-current-200a-esc-base-on-vesc-with-aluminum-heatsink-for-e-foil-fighting-robot-surfboard-agv-robot-arm?variant=36148315259048)**
>
> Spec: Voltage:14-75V( safe for 3-16S) Continuous Current : 200A Max Current :300A Supported sensors: ABI, HALL, AS5047,AS5048A EPRM:150000 Feature: Regenerative braking Sensored or sensorless operation + hybrid mode Configurable RPM-, current-,...
---
### Author:  [@wushbush](https://foil.zone/u/wushbush)
#### Post date: [September 11, 2020, 2:48am UTC](https://foil.zone/t/efoil-v3-stl-files-for-gong-foil-and-flipsky-motor-12mm-parts-list-schematics/9610/27 "2020-09-11T02:48:59Z")
[https://flipsky.net/collections/electronic-products/products/high-current-fsesc-200a-60v-base-on-vesc6](https://flipsky.net/collections/electronic-products/products/high-current-fsesc-200a-60v-base-on-vesc6)
---
### Author:  [@Invisible](https://foil.zone/u/Invisible)
#### Post date: [September 11, 2020, 10:33am UTC](https://foil.zone/t/efoil-v3-stl-files-for-gong-foil-and-flipsky-motor-12mm-parts-list-schematics/9610/28 "2020-09-11T10:33:20Z")
Just to short questions I would love to get a reply for !
1. what is the maximum speed you can reach with your board ?
2. How many volts has your battery ?
---
### Author:  [@DavidF](https://foil.zone/u/DavidF)
#### Post date: [September 11, 2020, 11:13am UTC](https://foil.zone/t/efoil-v3-stl-files-for-gong-foil-and-flipsky-motor-12mm-parts-list-schematics/9610/29 "2020-09-11T11:13:25Z")
did you not have any esc damage by cutting the power under load?
---
### Author:  [@DavidF](https://foil.zone/u/DavidF)
#### Post date: [September 11, 2020, 11:14am UTC](https://foil.zone/t/efoil-v3-stl-files-for-gong-foil-and-flipsky-motor-12mm-parts-list-schematics/9610/30 "2020-09-11T11:14:12Z")
Love your setup. Great!
---
### Author:  [@jeffM](https://foil.zone/u/jeffM)
#### Post date: [September 11, 2020, 3:33pm UTC](https://foil.zone/t/efoil-v3-stl-files-for-gong-foil-and-flipsky-motor-12mm-parts-list-schematics/9610/31 "2020-09-11T15:33:21Z")
New ride yesterday with the new prop, lower speed
46 minutes, 18A without duct. There was 25% battery left.
[ ](https://www.youtube.com/watch?v=ve4vRgr5PrU)
---
### Author:  [@jeffM](https://foil.zone/u/jeffM)
#### Post date: [September 11, 2020, 3:42pm UTC](https://foil.zone/t/efoil-v3-stl-files-for-gong-foil-and-flipsky-motor-12mm-parts-list-schematics/9610/32 "2020-09-11T15:42:35Z")
[DavidF]
did you not have any esc damage by cutting the power under load?
=\> no damage to my 3 Efoil and I have the same safety system
[Invisible]
Just to short questions I would love to get a reply for !
1. what is the maximum speed you can reach with your board ?
=\> this E-foil is not build for the speed due to a big wing, it’s build for the cruising at lower speed
and ride a maximum time
2. How many volts has your battery ?
=\> 12S (50V) 22AH
---
### Author:  [@jeffM](https://foil.zone/u/jeffM)
#### Post date: [September 11, 2020, 5:10pm UTC](https://foil.zone/t/efoil-v3-stl-files-for-gong-foil-and-flipsky-motor-12mm-parts-list-schematics/9610/33 "2020-09-11T17:10:52Z")
new prop diam 132mm old 125mm
picture after sanding and painting
---
### Author:  [@Invisible](https://foil.zone/u/Invisible)
#### Post date: [September 11, 2020, 6:29pm UTC](https://foil.zone/t/efoil-v3-stl-files-for-gong-foil-and-flipsky-motor-12mm-parts-list-schematics/9610/34 "2020-09-11T18:29:44Z")
Thank you, your latest post has helped me a lot and I think it is very cool how long your efoil drives with one battery charge.
That’s fine but I still want to know how fast you can be.
And do you think I could foil with a GONG WINGFOIL ALLVATOR VELOCE M when I use the same flipsky motor like you (I am 70kg)
---
### Author:  [@jeffM](https://foil.zone/u/jeffM)
#### Post date: [September 13, 2020, 7:20am UTC](https://foil.zone/t/efoil-v3-stl-files-for-gong-foil-and-flipsky-motor-12mm-parts-list-schematics/9610/35 "2020-09-13T07:20:27Z")
Here my parts list E-foil V3
> **[Efoil jeff V3.xlsx](https://drive.google.com/file/d/175gXplaONmwrTnOm7RVLHwrwhMwGV4if/view?usp=sharing)**
>
> Google Drive file.
---
### Author:  [@SoEFoil](https://foil.zone/u/SoEFoil)
#### Post date: [September 14, 2020, 1:26pm UTC](https://foil.zone/t/efoil-v3-stl-files-for-gong-foil-and-flipsky-motor-12mm-parts-list-schematics/9610/36 "2020-09-14T13:26:51Z")
A very useful part list file that will help many beginners. A simple and safe implementation for 1500eur
At first, I didn’t understand why you had used such a long waterproof alu box (25 cm). Then I looked at the pict in post no 8. Then I understood it was to occupy a separate waterproof volume. This ESC box is really packed and I couldn’t help wondering if you had tried the natural forced flow without pump, with just the cone water inlet.
---
### Author:  [@jeffM](https://foil.zone/u/jeffM)
#### Post date: [September 16, 2020, 3:17pm UTC](https://foil.zone/t/efoil-v3-stl-files-for-gong-foil-and-flipsky-motor-12mm-parts-list-schematics/9610/37 "2020-09-16T15:17:59Z")
No I haven’t tried the natural forced flow without pump, I don’t know if it can work
---
### Author:  [@jeffM](https://foil.zone/u/jeffM)
#### Post date: [September 16, 2020, 8:38pm UTC](https://foil.zone/t/efoil-v3-stl-files-for-gong-foil-and-flipsky-motor-12mm-parts-list-schematics/9610/38 "2020-09-16T20:38:08Z")
E-Foil Monteynard
https://player.vimeo.com/video/458731508
---
### Author:  [@Etienne](https://foil.zone/u/Etienne)
#### Post date: [September 16, 2020, 9:18pm UTC](https://foil.zone/t/efoil-v3-stl-files-for-gong-foil-and-flipsky-motor-12mm-parts-list-schematics/9610/39 "2020-09-16T21:18:26Z")
Salut Jean-François,
Je suppose que je peux écrire directement en français vu l’endroit où tu navigues ^^ Je crois que nous ne devons pas être très éloigné? (je suis sur Annecy 😃 ).
Avant hier, j’ai vu pour la 1ère fois ce genre d’engin naviguer sur le lac. Intrigué, j’ai cherché et suis rapidement tombé cette communauté qui semble bien active.
Depuis prèsque 2j je scrute donc ce forum à la recherche d’infos, prêt à me lancer aussi dans l’aventure efoil.
D’ailleurs vraiment reconnaissant pour les infos partagés ici, ça fait gagner beaucoup de temps et merci pour la liste d’achat!. Des produits sont déjà dans mon panier banggood 🙂.
Voilà pas mal de taf et questions à venir…
S’il y’a possibilité un jour de voir en vrai ce que ça donne, sur monteynard ou annecy, ce serait top!
---
### Author:  [@jeffM](https://foil.zone/u/jeffM)
#### Post date: [September 17, 2020, 6:31pm UTC](https://foil.zone/t/efoil-v3-stl-files-for-gong-foil-and-flipsky-motor-12mm-parts-list-schematics/9610/40 "2020-09-17T18:31:04Z")
Salut Etienne,
I’m from Grenoble, in fact I mainly do kitefoil, E-Foil it’s just to wait for the wind and for my children, so I’m mainly in Monteynard because it’s windy every day.
Sometimes I go to the lake Bourget when there is weather wind with E-foil in case the wind does not come in, but I never go to Annecy.
For the E-foil in Annecy, I was told that it was forbidden???
so find out before you start your construction, if this information is true
A+ sur un lac de notre région
---
### Author:  [@Etienne](https://foil.zone/u/Etienne)
#### Post date: [September 17, 2020, 8:25pm UTC](https://foil.zone/t/efoil-v3-stl-files-for-gong-foil-and-flipsky-motor-12mm-parts-list-schematics/9610/41 "2020-09-17T20:25:57Z")
Ok thanks for your answer. I don’t know if Annecy allows it or not, I’ll have to check.
As I said I saw someone a few days back with an efoil and yesterday 2 kitefoil at least were on the lake.
On my side I started kitesurf a few years ago and then bought my own equipment.
Unfortunately I’m not at ease with it. After a small misadventure this summer trying my kite on a field, I decided I would sell the kite which is too dangerous for my level (I’m beginner).
Now I’m thinking switching to efoil or simply navigate with something motorized (surfboard, whatever …) just to go in the middle of the lake 🙂
… before eventually going back to kitesurf with adequate equipment.
BTW I’ll follow your advice and check for annecy if this is ok otherwise “Lac du Bourget” and “Monteynard” may be good options even if last one is a bit far (1h30 by road).
Thanks again for all tips.
(PS: Sorry if this was a bit off topic, I’ll preferably contact through PM.)
EDIT: after verification with a link sent by @sat_be it is currently temporarily allowed ([http://www.haute-savoie.gouv.fr/content/download/32216/191159/file/ARP\_experimentation\_planches\_motorisees.pdf](http://www.haute-savoie.gouv.fr/content/download/32216/191159/file/ARP_experimentation_planches_motorisees.pdf))
[Previous page](https://foil.zone/t/efoil-v3-stl-files-for-gong-foil-and-flipsky-motor-12mm-parts-list-schematics/9610.md?page=1)
[Next page](https://foil.zone/t/efoil-v3-stl-files-for-gong-foil-and-flipsky-motor-12mm-parts-list-schematics/9610.md?page=3)