# Efoil V3 - STL files for Gong foil and Flipsky motor 12mm - Parts list - Schematics
**URL:** https://foil.zone/t/efoil-v3-stl-files-for-gong-foil-and-flipsky-motor-12mm-parts-list-schematics/9610
**Category:** Builds
**Created:** [September 6, 2020, 9:21pm UTC](https://foil.zone/t/efoil-v3-stl-files-for-gong-foil-and-flipsky-motor-12mm-parts-list-schematics/9610 "2020-09-06T21:21:59Z")
**Posts on this page:** 20
**Page:** 3
### Author:  [@nickrandy](https://foil.zone/u/nickrandy)
#### Post date: [September 18, 2020, 1:18pm UTC](https://foil.zone/t/efoil-v3-stl-files-for-gong-foil-and-flipsky-motor-12mm-parts-list-schematics/9610/43 "2020-09-18T13:18:12Z")
@jeffM great thread here. I have a few questions for you (or others) as I embark on my first build.
- exactly what foil did you use from gong? looks like XL but Im confused on their webpage options and the differences between S?UP/Kite/Surf?
-has anyone created fusion SLT files for the gong mast with pacificmeister’s SSS motor?
---
### Author:  [@jeffM](https://foil.zone/u/jeffM)
#### Post date: [September 18, 2020, 3:29pm UTC](https://foil.zone/t/efoil-v3-stl-files-for-gong-foil-and-flipsky-motor-12mm-parts-list-schematics/9610/44 "2020-09-18T15:29:31Z")
Hi, this is the XL curve wingfoil ( carbon aluminum) you will find the link in my excel file above
---
### Author:  [@jeffM](https://foil.zone/u/jeffM)
#### Post date: [September 21, 2020, 7:11pm UTC](https://foil.zone/t/efoil-v3-stl-files-for-gong-foil-and-flipsky-motor-12mm-parts-list-schematics/9610/45 "2020-09-21T19:11:26Z")
Here schematics
> **[Schematics V3.xlsx](https://drive.google.com/file/d/1vwYXM4sxkAidndeL0t8N-fG4PIY5gLUX/view?usp=sharing)**
>
> Google Drive file.
---
### Author:  [@SoEFoil](https://foil.zone/u/SoEFoil)
#### Post date: [September 22, 2020, 11:05pm UTC](https://foil.zone/t/efoil-v3-stl-files-for-gong-foil-and-flipsky-motor-12mm-parts-list-schematics/9610/46 "2020-09-22T23:05:57Z")
Part list plus wiring diagram = good job ! 👍
---
### Author:  [@jeffM](https://foil.zone/u/jeffM)
#### Post date: [September 24, 2020, 9:07am UTC](https://foil.zone/t/efoil-v3-stl-files-for-gong-foil-and-flipsky-motor-12mm-parts-list-schematics/9610/47 "2020-09-24T09:07:05Z")
Does anyone have the flipsky motor 12mm file in .step ?
---
### Author:  [@jeffM](https://foil.zone/u/jeffM)
#### Post date: [October 8, 2020, 4:28pm UTC](https://foil.zone/t/efoil-v3-stl-files-for-gong-foil-and-flipsky-motor-12mm-parts-list-schematics/9610/48 "2020-10-08T16:28:48Z")
18650 build finished, and tested today, very Happy.
it’s samsung 30q 12S/10P with BMS
 
spotweler and charger
  
busbar:
BMS connection : 
---
### Author:  [@jeffM](https://foil.zone/u/jeffM)
#### Post date: [October 8, 2020, 4:41pm UTC](https://foil.zone/t/efoil-v3-stl-files-for-gong-foil-and-flipsky-motor-12mm-parts-list-schematics/9610/49 "2020-10-08T16:41:12Z")
tested today with the Autumn colors 🙂
ride time : 1H15
max temp : 45 C
Amp average : 18A
swimming fins and other prop into the bag 🙂
And I lent my E-foil V3 to my friend and took back my e-foil V1
  
---
### Author:  [@Toto44](https://foil.zone/u/Toto44)
#### Post date: [October 9, 2020, 7:02am UTC](https://foil.zone/t/efoil-v3-stl-files-for-gong-foil-and-flipsky-motor-12mm-parts-list-schematics/9610/50 "2020-10-09T07:02:38Z")
18Amps?! What motor and wing are you using?
---
### Author:  [@SoEFoil](https://foil.zone/u/SoEFoil)
#### Post date: [October 9, 2020, 10:22am UTC](https://foil.zone/t/efoil-v3-stl-files-for-gong-foil-and-flipsky-motor-12mm-parts-list-schematics/9610/51 "2020-10-09T10:22:18Z")
Flipsky 120kv, Gong XL Curve (1st post 😉)
If I analyse correctly, the 20+% amp gain comes from a more triangular prop blade shape:
> **[Efoil V3 - STL files for Gong foil and Flipsky motor 12mm - Parts list -...](https://foil.zone/t/efoil-v3-stl-files-for-gong-foil-and-flipsky-motor-12mm-parts-list-schematics/9610/19)**
>
> Test new prop shape today 18A vs 23A old shape. Very nice 🙂 but I have some whistling
@jeffM, I find really interesting that your kill switch did not show any kind of damage on your V1 and V3 ESCs.
To know what to expect from a Gong XL Curve, what are now your take-off and max speed (even if speed is not your goal) ? Did you find/borrow a L or M Gong Curve to test/feel differences ?
Compared to the direct drive simplicity of the V3, what differences do you notice when you ride the geared V1 efoil again ? Would you build a geared efoil again or not worth the extra hassle ?
---
### Author:  [@Toto44](https://foil.zone/u/Toto44)
#### Post date: [October 9, 2020, 12:21pm UTC](https://foil.zone/t/efoil-v3-stl-files-for-gong-foil-and-flipsky-motor-12mm-parts-list-schematics/9610/52 "2020-10-09T12:21:05Z")
ok, the XL explaines the low current rating.
---
### Author:  [@samisin](https://foil.zone/u/samisin)
#### Post date: [October 9, 2020, 2:23pm UTC](https://foil.zone/t/efoil-v3-stl-files-for-gong-foil-and-flipsky-motor-12mm-parts-list-schematics/9610/53 "2020-10-09T14:23:40Z")
Gong doesn’t stock any xl wing anymore I have been looking for it for a while now
---
### Author:  [@jeffM](https://foil.zone/u/jeffM)
#### Post date: [October 9, 2020, 4:31pm UTC](https://foil.zone/t/efoil-v3-stl-files-for-gong-foil-and-flipsky-motor-12mm-parts-list-schematics/9610/54 "2020-10-09T16:31:18Z")
with the curve I don’t no exactly the speed for the take off (I will look at my GPS for the next ride) I think 13/14 km/h and Vmax 25km/h after there is a whistling certainly due to stab, and I don’t like the noise when I ride.
Never test L or M gong curve but I ride with a ketos foil with cruiser / wave XL and fr2
and the XXL curve start really earlier. But I tried it on a kitefoil, and it’s not very fun “pleasant”
it’s too big.
V1 more power but more noise, and more complicated for construction.
if i build a new one it will be with an engine like the flypsky
---
### Author:  [@jeffM](https://foil.zone/u/jeffM)
#### Post date: [October 9, 2020, 4:55pm UTC](https://foil.zone/t/efoil-v3-stl-files-for-gong-foil-and-flipsky-motor-12mm-parts-list-schematics/9610/55 "2020-10-09T16:55:48Z")
I check my GPS for my last ride yesterday, lower speed 11 km/H
---
### Author:  [@Vitalii](https://foil.zone/u/Vitalii)
#### Post date: [October 10, 2020, 7:44am UTC](https://foil.zone/t/efoil-v3-stl-files-for-gong-foil-and-flipsky-motor-12mm-parts-list-schematics/9610/56 "2020-10-10T07:44:05Z")
> [@jeffM](#):
>
> Amp average : 18A
Could you share current pick to go on the wing in this config and yours weight? Your board still 24kg?
---
### Author:  [@jeffM](https://foil.zone/u/jeffM)
#### Post date: [October 10, 2020, 8:59am UTC](https://foil.zone/t/efoil-v3-stl-files-for-gong-foil-and-flipsky-motor-12mm-parts-list-schematics/9610/57 "2020-10-10T08:59:48Z")
SoEFoil wrote:
If I analyse correctly, the 20+% amp gain comes from a more triangular prop blade shape:
=\> the gain 23A to 18A comes : new prop diam 132mm old 125mm
and i sanding the trailing edge (more sharp). I don’t think the shape improved
efficiency. Because I tried to do the same 🙂 but you’re right it’s not realy the same
it’s more triangular but it’s exactly the same blade.
On the first propeller I had done a “dirty job” 🙂 , I had a slightly different blade
look on the picture of the lower blade
and also I sanded the cone at the base of the blades
I look forward to receiving the aluminum propeller from FR to compare the efficiency and install the swirlcone from [cim96dm7](https://efoil.builders/u/cim96dm7)
---
### Author:  [@nickrandy](https://foil.zone/u/nickrandy)
#### Post date: [October 12, 2020, 4:40pm UTC](https://foil.zone/t/efoil-v3-stl-files-for-gong-foil-and-flipsky-motor-12mm-parts-list-schematics/9610/59 "2020-10-12T16:40:19Z")
@jeffM did you ever have to widen the hole in the back mast clamp? I have 3 8awg wires that I am trying to fit through this back mast clamp from the flipsky motor and it seems to be too tight of a fit.
---
### Author:  [@jeffM](https://foil.zone/u/jeffM)
#### Post date: [October 12, 2020, 7:52pm UTC](https://foil.zone/t/efoil-v3-stl-files-for-gong-foil-and-flipsky-motor-12mm-parts-list-schematics/9610/60 "2020-10-12T19:52:06Z")
No I didn’t need to widen the hole
it’s tight but it works with 3 8awg cables
I got the stl from the forum
if i remember correctly it was robert’s creation @nice2cu
he can answer if he reads this post
---
### Author:  [@nice2cu](https://foil.zone/u/nice2cu)
#### Post date: [October 12, 2020, 8:09pm UTC](https://foil.zone/t/efoil-v3-stl-files-for-gong-foil-and-flipsky-motor-12mm-parts-list-schematics/9610/61 "2020-10-12T20:09:01Z")
Hi, which one you are using?
---
### Author:  [@nickrandy](https://foil.zone/u/nickrandy)
#### Post date: [October 12, 2020, 8:25pm UTC](https://foil.zone/t/efoil-v3-stl-files-for-gong-foil-and-flipsky-motor-12mm-parts-list-schematics/9610/62 "2020-10-12T20:25:06Z")
I am using the flipsky 65161/gong mast mount. My motor has these connectors on the end that are the issue, were these connectors on your flipsky motors?
 
---
### Author:  [@nice2cu](https://foil.zone/u/nice2cu)
#### Post date: [October 12, 2020, 8:37pm UTC](https://foil.zone/t/efoil-v3-stl-files-for-gong-foil-and-flipsky-motor-12mm-parts-list-schematics/9610/63 "2020-10-12T20:37:17Z")
🤣🤣🤣 sorry but you must cut off the plugs.
You will also not have luck when you want to thread through the mast 😉
[Previous page](https://foil.zone/t/efoil-v3-stl-files-for-gong-foil-and-flipsky-motor-12mm-parts-list-schematics/9610.md?page=2)
[Next page](https://foil.zone/t/efoil-v3-stl-files-for-gong-foil-and-flipsky-motor-12mm-parts-list-schematics/9610.md?page=4)