# Efoil V3 - STL files for Gong foil and Flipsky motor 12mm - Parts list - Schematics

**URL:** https://foil.zone/t/efoil-v3-stl-files-for-gong-foil-and-flipsky-motor-12mm-parts-list-schematics/9610
**Category:** Builds
**Created:** [September 6, 2020, 9:21pm UTC](https://foil.zone/t/efoil-v3-stl-files-for-gong-foil-and-flipsky-motor-12mm-parts-list-schematics/9610 "2020-09-06T21:21:59Z")
**Posts on this page:** 1
**Showing post:** 190

<div class="post-metadata">

### Author: ![nice2cu](https://foil.zone/user_avatar/foil.zone/nice2cu/32/17766_2.png) [@nice2cu](https://foil.zone/u/nice2cu)
#### Post date: [August 25, 2021, 4:47am UTC](https://foil.zone/t/efoil-v3-stl-files-for-gong-foil-and-flipsky-motor-12mm-parts-list-schematics/9610/190 "2021-08-25T04:47:54Z")

</div>

I print it hollow.  
I used 3 or 4 layers for the border.  
After I drilled on the layers that looking together when you mount it on the mast some holes and filled the clamps with Epoxy mixed with bits of glass.  
Because I want it nice and more stable, I laminated it with one layer CFK.

Here you can see how I laminated it.

> [@Slow Build Austria / Salzburg](https://foil.zone/t/slow-build-austria-salzburg/5966/108):
>
> For those in Europe if found this: [https://www.easyparts.nl/Snelkoppeling-Benzineslang-Ø6mm\_(Benzine-kranen)-p3510531](https://www.easyparts.nl/Snelkoppeling-Benzineslang-%C3%986mm_(Benzine-kranen)-p3510531) Its for fuel lines, quite cheap and for 6 or 8mm inside dia hoses. Dispatched from NL

---

_[View the full topic](https://foil.zone/t/efoil-v3-stl-files-for-gong-foil-and-flipsky-motor-12mm-parts-list-schematics/9610)._