# Escape32 Setup - Share your settings

**URL:** https://foil.zone/t/escape32-setup-share-your-settings/26871
**Category:** Electronics (ESC, remote, batteries)
**Created:** [July 24, 2026, 11:38am UTC](https://foil.zone/t/escape32-setup-share-your-settings/26871 "2026-07-24T11:38:27Z")
**Posts on this page:** 2
**Page:** 1

<div class="post-metadata">

### Author: ![AlexTls](https://foil.zone/letter_avatar_proxy/v4/letter/a/e36b37/32.png) [@AlexTls](https://foil.zone/u/AlexTls)
#### Post date: [July 24, 2026, 11:38am UTC](https://foil.zone/t/escape32-setup-share-your-settings/26871/1 "2026-07-24T11:38:27Z")

</div>

Hi all,

I’ve been using an Escape32 Esc ([Sequre WP14200](https://sequremall.com/products/sequre-wp14200-ip68-waterproof-200a-esc-drones-efoil-board?)) and I’m currently trying to have it running as I’d like. I wanted to create a thread where we could share our settings. I’m still fine tuning but his worked for me, though I still need to figure out some slight cogging under hard acceleration. I’ll update once I’m happy with everything, but at least this is a base config. Running Firmware revision 17 (patch 1)

My setup:

- I’m 100kg 1m90 (220lbs 6’2)
- F-one Phantom 1480 / Gong Hipe 5.3 (110L)
- Flipsky 65161 / FR prop / 13S10P / Sequre WP14200

Current settings:

 ![Config Ok-1](https://foil.zone/uploads/default/original/3X/e/d/edfd90344ac7bcd2920de59054562047f1a55ee8.png)

 ![Config Ok-2](https://foil.zone/uploads/default/original/3X/8/c/8c840c855462ca900106cb19f06411c4e2efc682.png)

Feel free to share yours !

---

<div class="post-metadata">

### Author: ![AlexTls](https://foil.zone/letter_avatar_proxy/v4/letter/a/e36b37/32.png) [@AlexTls](https://foil.zone/u/AlexTls)
#### Post date: [August 31, 2026, 9:25pm UTC](https://foil.zone/t/escape32-setup-share-your-settings/26871/2 "2026-08-31T21:25:13Z")

</div>

These are now my current settings… Had to tweak things a bit. I’m still getting some BLDC noise I didn’t have with the FOC esc…

 ![Screenshot_20260831-230727~2](https://foil.zone/uploads/default/original/3X/6/2/62ae60d40b0226fcb12cd7083d2d3844d48d955f.jpeg)  
 ![Screenshot_20260831-230743~2](https://foil.zone/uploads/default/original/3X/e/a/ea2b1d83b27bdd72bd3dc9895a8a320df1684a70.jpeg)

I’m now running an ESP32 to capture telemetry and stream it to my phone.  
I’ve made a small dashboard to analyze the session afterwards. it is even logging my gps tracks…  
AI allows for some really fun stuff nowadays !

 ![image](https://foil.zone/uploads/default/original/3X/7/0/7080550efd2ca99dc302035aeb40357eddbd127f.png)  
 ![image](https://foil.zone/uploads/default/original/3X/4/a/4aa72687ab4f352f0b67d1bd3856a2b9f7e8daf1.png)

 ![image](https://foil.zone/uploads/default/original/3X/1/a/1a282fd328f20da1da4764b99257e0a7c031c200.jpeg)