# Etienne Dual Motor Tow Boogie
**URL:** https://foil.zone/t/etienne-dual-motor-tow-boogie/20275
**Category:** Build, Repair & Mod
**Created:** [March 5, 2024, 1:45pm UTC](https://foil.zone/t/etienne-dual-motor-tow-boogie/20275 "2024-03-05T13:45:25Z")
**Posts on this page:** 20
**Page:** 5
### Author:  [@Airtimeasto](https://foil.zone/u/Airtimeasto)
#### Post date: [August 11, 2025, 9:20pm UTC](https://foil.zone/t/etienne-dual-motor-tow-boogie/20275/83 "2025-08-11T21:20:38Z")
They have discontinued this model here in Australia apparently they only sell the 2.4m version.
There’s heaps of second hand soft flat bottom ones though
---
### Author:  [@Airtimeasto](https://foil.zone/u/Airtimeasto)
#### Post date: [August 13, 2025, 5:19am UTC](https://foil.zone/t/etienne-dual-motor-tow-boogie/20275/84 "2025-08-13T05:19:51Z")
I have found one of these but it has an inflatable hull would it possible to make V hull from fibre glass and glue to bass to attach motors?
> **[SIROCCO Air Hulls tenders | Sirocco Marine Perth | South Fremantle](https://www.siroccomarineperth.com.au/sirocco-air-hulls)**
>
> Explore the SIROCCO range of light-weight fully inflatable (boat-in-a-bag) Air Hull tenders here
---
### Author:  [@Bzhwindtalker](https://foil.zone/u/Bzhwindtalker)
#### Post date: [August 13, 2025, 11:16am UTC](https://foil.zone/t/etienne-dual-motor-tow-boogie/20275/85 "2025-08-13T11:16:58Z")
I have Ozeam air deck 300 with V queel. Very stable and light.
they have this model down to 2m!
---
### Author:  [@Jezza](https://foil.zone/u/Jezza)
#### Post date: [August 13, 2025, 11:36am UTC](https://foil.zone/t/etienne-dual-motor-tow-boogie/20275/86 "2025-08-13T11:36:24Z")
I think this would be a very interesting option (145cm x 110cm):
[https://www.decathlon.co.uk/p/float-tube-for-predator-fishing-fltb-5-v2-motorisable-limited-edition-camouflage/\_/R-p-332558?mc=8643994&c=dark%20grey\_fluo%20orange](https://www.decathlon.co.uk/p/float-tube-for-predator-fishing-fltb-5-v2-motorisable-limited-edition-camouflage/_/R-p-332558?mc=8643994&c=dark%20grey_fluo%20orange)
It already has a place to attach a single motor but could be modified to fit 2
---
### Author:  [@Girl\_miami](https://foil.zone/u/Girl_miami)
#### Post date: [August 13, 2025, 10:58pm UTC](https://foil.zone/t/etienne-dual-motor-tow-boogie/20275/87 "2025-08-13T22:58:30Z")
wow. where are you from?
---
### Author:  [@Etiennebzh](https://foil.zone/u/Etiennebzh)
#### Post date: [August 14, 2025, 1:03pm UTC](https://foil.zone/t/etienne-dual-motor-tow-boogie/20275/88 "2025-08-14T13:03:29Z")
I’m in France.
Last option of the dinghy to hide everything for a clean looking
---
### Author:  [@Etiennebzh](https://foil.zone/u/Etiennebzh)
#### Post date: [September 17, 2025, 5:17am UTC](https://foil.zone/t/etienne-dual-motor-tow-boogie/20275/89 "2025-09-17T05:17:43Z")
> **[EASY RIDE on Instagram: "@etienne\_guena dans ses œuvres !! 👏👏#saintmalo #foil...](https://www.instagram.com/reel/DOqN8TvjKPk/?igsh=MWc3M2x3YnIzaTkwZA==)**
>
> 79 likes, 2 comments - easyridevideos on September 16, 2025: "@etienne\_guena dans ses œuvres !! 👏👏#saintmalo #foil #wave #foiling".
---
### Author:  [@Jezza](https://foil.zone/u/Jezza)
#### Post date: [September 17, 2025, 6:40am UTC](https://foil.zone/t/etienne-dual-motor-tow-boogie/20275/90 "2025-09-17T06:40:08Z")
So jealous you have that tow, it runs so well!
---
### Author:  [@Airtimeasto](https://foil.zone/u/Airtimeasto)
#### Post date: [October 18, 2025, 12:03am UTC](https://foil.zone/t/etienne-dual-motor-tow-boogie/20275/91 "2025-10-18T00:03:48Z")
Could we mount the dual motors to stern of boat like a normal I’d like to build one for tow and also for my son so he can go fishing. Will it effect the range of steering is that why we mount them closer to centre?
---
### Author:  [@Etiennebzh](https://foil.zone/u/Etiennebzh)
#### Post date: [October 18, 2025, 5:26am UTC](https://foil.zone/t/etienne-dual-motor-tow-boogie/20275/92 "2025-10-18T05:26:09Z")
I would say yes for positionning at the aft. You will need weight forward to counteract the nose up effect.
It will steer like when it’s a bit more forward.
The pods are a bit inside to avoid danger with operator and propeller spinning.
---
### Author:  [@philippe](https://foil.zone/u/philippe)
#### Post date: [October 18, 2025, 3:11pm UTC](https://foil.zone/t/etienne-dual-motor-tow-boogie/20275/93 "2025-10-18T15:11:52Z")
Hello, where did you find your cover?thank you
---
### Author:  [@Etiennebzh](https://foil.zone/u/Etiennebzh)
#### Post date: [October 18, 2025, 4:02pm UTC](https://foil.zone/t/etienne-dual-motor-tow-boogie/20275/94 "2025-10-18T16:02:17Z")
Hello, it’s handmade
---
### Author:  [@philippe](https://foil.zone/u/philippe)
#### Post date: [October 20, 2025, 3:15pm UTC](https://foil.zone/t/etienne-dual-motor-tow-boogie/20275/95 "2025-10-20T15:15:41Z")
Hello,
Do you have a link to the motor mounts for the Gong mast? Thank you.
---
### Author:  [@Etiennebzh](https://foil.zone/u/Etiennebzh)
#### Post date: [October 21, 2025, 5:01am UTC](https://foil.zone/t/etienne-dual-motor-tow-boogie/20275/96 "2025-10-21T05:01:49Z")
Hello Philippe, I haven’t got because I asked to Ap3d custom to do the design and print.
---
### Author:  [@philippe](https://foil.zone/u/philippe)
#### Post date: [November 7, 2025, 7:37am UTC](https://foil.zone/t/etienne-dual-motor-tow-boogie/20275/97 "2025-11-07T07:37:42Z")
Hi Etienne, could you explain how you made your non-return valve sock?
---
### Author:  [@Etiennebzh](https://foil.zone/u/Etiennebzh)
#### Post date: [November 11, 2025, 4:37am UTC](https://foil.zone/t/etienne-dual-motor-tow-boogie/20275/98 "2025-11-11T04:37:29Z")
Hello,
It’s just a piece of an old kite stuck around the existing non return valve and also glued on the length of it. All with sikaflex.
A good second way to avoid water coming in.
---
### Author:  [@Flappy](https://foil.zone/u/Flappy)
#### Post date: [November 22, 2025, 7:43pm UTC](https://foil.zone/t/etienne-dual-motor-tow-boogie/20275/99 "2025-11-22T19:43:50Z")
Hi Etiennebzh, thanks for sharing your experience, the boogie looks dope.
You said you asked Ap3d to design and print your gong v3 mast mount. Is Ap3d a user here or a company? I searched for someone with that username but didn’t seen anyone.
---
### Author:  [@Etiennebzh](https://foil.zone/u/Etiennebzh)
#### Post date: [November 22, 2025, 8:01pm UTC](https://foil.zone/t/etienne-dual-motor-tow-boogie/20275/100 "2025-11-22T20:01:33Z")
Hello, it’s a french designer
> **[Boutique Kpart Watersports](https://kparts-watersports.com/)**
>
> Kparts Watersports est un créateur et fabricant français d'accessoires de sports nautique et de glisse.
---
### Author:  [@Etiennebzh](https://foil.zone/u/Etiennebzh)
#### Post date: [March 6, 2026, 5:48am UTC](https://foil.zone/t/etienne-dual-motor-tow-boogie/20275/101 "2026-03-06T05:48:15Z")
My second set of 12S11P (2× 6S11P serial) has the same issue as the first one.
Reminder: No BMS, just balancing charges.
When I go until the reasonable deep discharges (3V), one serie drops under 2.5V.
Any reason related to the design ?
---
### Author:  [@Jan12](https://foil.zone/u/Jan12)
#### Post date: [March 6, 2026, 4:38pm UTC](https://foil.zone/t/etienne-dual-motor-tow-boogie/20275/102 "2026-03-06T16:38:42Z")
I do not think it is a good idea to go below 3.25V under load ever.
Li-Ion at 3.0V at no load is basically 0% SoC.
The actual difference between 3.0V and 2.1V is pretty much nothing.
[Previous page](https://foil.zone/t/etienne-dual-motor-tow-boogie/20275.md?page=4)
[Next page](https://foil.zone/t/etienne-dual-motor-tow-boogie/20275.md?page=6)