# EXOGLIDE - From Thailand
**URL:** https://foil.zone/t/exoglide-from-thailand/4480
**Category:** Products
**Created:** [May 13, 2019, 7:21am UTC](https://foil.zone/t/exoglide-from-thailand/4480 "2019-05-13T07:21:40Z")
**Posts on this page:** 20
**Page:** 1
### Author:  [@EXOGLIDE](https://foil.zone/u/EXOGLIDE)
#### Post date: [May 13, 2019, 7:21am UTC](https://foil.zone/t/exoglide-from-thailand/4480/1 "2019-05-13T07:21:40Z")
New slow moving project under development in Thailand.
The project idea is to make boards for me and my friends and have an efoil where you can stand up to start with a reliable electric motor, batteries and remote device.
The first prototype is working, we now improving all parts to make it lighter and more efficient (still have a lot to do …).
Cheers from Bangkok,
Lolo
---
### Author:  [@johnjohn666](https://foil.zone/u/johnjohn666)
#### Post date: [May 14, 2019, 3:27pm UTC](https://foil.zone/t/exoglide-from-thailand/4480/2 "2019-05-14T15:27:01Z")
Hello ! which is your setup for the moment ? 😊
---
### Author:  [@EXOGLIDE](https://foil.zone/u/EXOGLIDE)
#### Post date: [May 15, 2019, 2:12am UTC](https://foil.zone/t/exoglide-from-thailand/4480/3 "2019-05-15T02:12:22Z")
- Custom made Bamboo board 7’1, 120 liters that i plan to make in 2 parts to make easy transportation.
- ESC Hydra ice HV200
- SSS MOTOR 500 KV
- MAYTECH water proof remote IP67
- Chinese Gear box 5:1
- Propeller from Flying Rodeo
- 2 x LiPo Batteries 6S, 20 000 mA
- All PLA printed parts replaced by alu 6061 machined
- Double bearing on shaft
- Home made Carbon Fiber foil and mast, aluminum fuselage
That s the preliminary setup, it will be improved step by step, all advices are welcome !
---
### Author:  [@SoEFoil](https://foil.zone/u/SoEFoil)
#### Post date: [May 15, 2019, 9:49pm UTC](https://foil.zone/t/exoglide-from-thailand/4480/4 "2019-05-15T21:49:29Z")
Welcome aboard !
Which motor have you tested ? Do you intend to make it a commercial product if your friends like it ?
---
### Author:  [@EXOGLIDE](https://foil.zone/u/EXOGLIDE)
#### Post date: [May 15, 2019, 10:44pm UTC](https://foil.zone/t/exoglide-from-thailand/4480/5 "2019-05-15T22:44:11Z")
Thank you. I m using SSS motor 500KV. No commercial vision…, just for me and my friends !, i m looking for good propeller, FR is out of stock. Any suggestion ?
---
### Author:  [@SoEFoil](https://foil.zone/u/SoEFoil)
#### Post date: [February 13, 2020, 5:14pm UTC](https://foil.zone/t/exoglide-from-thailand/4480/6 "2020-02-13T17:14:23Z")
Seems like the Exoglide efoil will be launched and available as a commercial product next April in France. @EXOGLIDE Would you mind sharing a few details with us:
1 - Price ?
2 - ESC: what’s the new one since the Castle Creations Hydra Ice HV200 ESC seem to have been abandoned ?
3 - SPECS for motor and battery ?
4a - Prop: looks like the PM v3.x - what will it be made off in the commercial version: alu cast, 3D printed ? The prop tip clearance looks like 10mm ie huge.
4b- Prop: Is the Flying Rodeo trail abandoned ?
5 - Board: nice compact pebble shape that doesn’t seem to stick to water. Is it made by Cobra ?
6 - Data logging: would you show your figures ensuring 75min of fly time ?
7 - Did you face difficulties mating the Maytech V2 receiver with the Hydra 200 ESC and the new one ?
Video comments are in French 😐 (French shop)
---
### Author:  [@SoEFoil](https://foil.zone/u/SoEFoil)
#### Post date: [February 14, 2020, 9:15pm UTC](https://foil.zone/t/exoglide-from-thailand/4480/7 "2020-02-14T21:15:38Z")
Hey Laurent, you little _cachotier_ 😉. Would you show us what’s inside the hatch ?
They look very much alike the Surffic (Barcelona Spain) - Cimy (China) boards
> **[Exoglide | Bangkok](https://www.facebook.com/Exoglide-180670989198803/)**
>
> Exoglide, Bangkok, Thailand. 478 likes. Efoil
Really nice looking bamboo foil 🤪 No prop guard for this board going to France, really ?
---
### Author:  [@Jezza](https://foil.zone/u/Jezza)
#### Post date: [February 14, 2020, 9:44pm UTC](https://foil.zone/t/exoglide-from-thailand/4480/8 "2020-02-14T21:44:26Z")
These are made in Thailand. Different to the surfic boards from China.
---
### Author:  [@EXOGLIDE](https://foil.zone/u/EXOGLIDE)
#### Post date: [February 21, 2020, 8:15pm UTC](https://foil.zone/t/exoglide-from-thailand/4480/9 "2020-02-21T20:15:57Z")
@SoEFoil, we are using Maytech ESC 300 Amp, remote V2, 65151 motor 120 KV, 12S, 40 Ah battery Li-Ion, Prop is aluminum Amita 3 remachined (may be different from video), board is a smaller 150 cm EXOGLIDE and not made by Cobra, foil is a 1200 cm2 EXOGLIDE CF/bamboo front wing, price not yet set.
---
### Author:  [@SoEFoil](https://foil.zone/u/SoEFoil)
#### Post date: [February 22, 2020, 1:17am UTC](https://foil.zone/t/exoglide-from-thailand/4480/10 "2020-02-22T01:17:09Z")
Very nice, you are the first brand to use the Maytech trilogy: ESC + remote + motor
A few more questions for you:
- Would you be willing to sell the board separately to DiYers ?
- Do you use a pump or water forced cooling from the pod to your MT waterproof ESC ?
- Which shaft did you choose with your Maytech motor, pined or toothed ?
- Did you mill down one of these propellers (5.5 to 6in = 140 or 150mm ?) :
Here is this Solas Amita 3 Blade 7.5 X 7P Propeller ref: **3011-075-07S**? (tooth spline hub)
They exist in 7.25 x 5 ref **3011-073-05S** (tooth spline hub)
or with pin
Looking really good, very high end compared to the plastic solas we were used to so far.
52usd here [https://www.boatid.com/solas-propellers/7-1-2-d-x-7-rh-rotation-3-blade-aluminum-non-thru-hub-exhaust-propeller-mpn-3011-075-07s.html](https://www.boatid.com/solas-propellers/7-1-2-d-x-7-rh-rotation-3-blade-aluminum-non-thru-hub-exhaust-propeller-mpn-3011-075-07s.html)
With pin version: [https://www.boatid.com/solas-propellers/7-13-16-d-x-8-rh-rotation-3-blade-aluminum-non-thru-hub-exhaust-propeller-mpn-6011-079-07p.html](https://www.boatid.com/solas-propellers/7-13-16-d-x-8-rh-rotation-3-blade-aluminum-non-thru-hub-exhaust-propeller-mpn-6011-079-07p.html)
---
### Author:  [@SoEFoil](https://foil.zone/u/SoEFoil)
#### Post date: [February 22, 2020, 1:07pm UTC](https://foil.zone/t/exoglide-from-thailand/4480/11 "2020-02-22T13:07:06Z")
Here are the Solas references. We are looking for propellers for inflatable outboard motors in the 3 to 5 or 6 HP range.
---
### Author:  [@EXOGLIDE](https://foil.zone/u/EXOGLIDE)
#### Post date: [February 24, 2020, 11:08am UTC](https://foil.zone/t/exoglide-from-thailand/4480/12 "2020-02-24T11:08:54Z")
Yes, if people in this forum are interested, i can make a special offer and sell EXOGLIDE with a version starter kit “KITTERS” to make assembly by Diyers. Everybody will have the possibilities to get sub assembly components of their choice (or select others brands) : Board + Mast with motor + FOIL + ESC box + Remote + Battery + Travel bags.
We do not use water pump to cool down ESC, just the aluminum enclosure dissipate heat.
Using pin version for the motor.
Solas Amita 3 work well and just cruising at 20 kmh.
---
### Author:  [@SoEFoil](https://foil.zone/u/SoEFoil)
#### Post date: [February 24, 2020, 1:23pm UTC](https://foil.zone/t/exoglide-from-thailand/4480/13 "2020-02-24T13:23:04Z")
These are very good news. Please keep us posted when you have set the price. Not sure whether you would also sell board only but it would certainly interest a few people if you did.
---
### Author:  [@Jezza](https://foil.zone/u/Jezza)
#### Post date: [February 24, 2020, 3:37pm UTC](https://foil.zone/t/exoglide-from-thailand/4480/14 "2020-02-24T15:37:48Z")
I think at this stage the board is probably the biggest thing that most DIY guys are after!
---
### Author:  [@EXOGLIDE](https://foil.zone/u/EXOGLIDE)
#### Post date: [February 25, 2020, 10:34am UTC](https://foil.zone/t/exoglide-from-thailand/4480/15 "2020-02-25T10:34:47Z")
Board price will be : 1200 EURO excluding transportation and taxes.
---
### Author:  [@cylonius](https://foil.zone/u/cylonius)
#### Post date: [October 1, 2020, 1:14pm UTC](https://foil.zone/t/exoglide-from-thailand/4480/16 "2020-10-01T13:14:50Z")
Just colorful pictures or is the board available for shipment?
---
### Author:  [@EXOGLIDE](https://foil.zone/u/EXOGLIDE)
#### Post date: [October 1, 2020, 1:56pm UTC](https://foil.zone/t/exoglide-from-thailand/4480/17 "2020-10-01T13:56:33Z")
Welcome to the forum Cyclonius. I have 6 boards available right now with differents color. But can do also custom color if you wish. Just go on fb page to see how it ride. I m here for any question. Cheers !
---
### Author:  [@Jezza](https://foil.zone/u/Jezza)
#### Post date: [October 1, 2020, 3:14pm UTC](https://foil.zone/t/exoglide-from-thailand/4480/18 "2020-10-01T15:14:06Z")
Can you post pics of the boards you have available? Where are the boards?
---
### Author:  [@cylonius](https://foil.zone/u/cylonius)
#### Post date: [October 2, 2020, 5:03am UTC](https://foil.zone/t/exoglide-from-thailand/4480/19 "2020-10-02T05:03:04Z")
Was on FB, no technical data, no price at all.
Is it a secret or do you want to keep all the boards for you?
---
### Author:  [@EXOGLIDE](https://foil.zone/u/EXOGLIDE)
#### Post date: [October 2, 2020, 5:59am UTC](https://foil.zone/t/exoglide-from-thailand/4480/20 "2020-10-02T05:59:28Z")
They are in Bangkok THAILAND. Will post photos next monday. Cheers
[Next page](https://foil.zone/t/exoglide-from-thailand/4480.md?page=2)