# Flipsky 65161 und vesc 75100 engine problem by start

**URL:** https://foil.zone/t/flipsky-65161-und-vesc-75100-engine-problem-by-start/16904
**Category:** efoils – Electric Hydrofoil Surfboards
**Tags:** vesc, jetmotor, jetboard
**Created:** [October 12, 2022, 7:13am UTC](https://foil.zone/t/flipsky-65161-und-vesc-75100-engine-problem-by-start/16904 "2022-10-12T07:13:03Z")
**Posts on this page:** 2
**Page:** 1

<div class="post-metadata">

### Author: ![BOB](https://foil.zone/user_avatar/foil.zone/bob/32/25438_2.png) [@BOB](https://foil.zone/u/BOB)
#### Post date: [October 12, 2022, 7:13am UTC](https://foil.zone/t/flipsky-65161-und-vesc-75100-engine-problem-by-start/16904/1 "2022-10-12T07:13:03Z")

</div>

Processing: VID-20221008-WA0006.mp4…  
Hello,sir, you are using the latest firmware to adjust the parameters. If you use the sensorless mode, sometimes the startup will be stuck. You can try booting in HFI mode.

---

<div class="post-metadata">

### Author: ![BOB](https://foil.zone/user_avatar/foil.zone/bob/32/25438_2.png) [@BOB](https://foil.zone/u/BOB)
#### Post date: [October 23, 2022, 2:52pm UTC](https://foil.zone/t/flipsky-65161-und-vesc-75100-engine-problem-by-start/16904/2 "2022-10-23T14:52:27Z")

</div>

![16665366416004337428140800548818](https://foil.zone/uploads/default/original/3X/7/c/7cebc3b540a650a0b6dad9d7d2cda39f36bf5dd2.jpeg)  
What is the right setup for 65161…100kv…its work now in current mode…not in duty mode