# Flipsky vesc 6.8 mini plus

**URL:** https://foil.zone/t/flipsky-vesc-6-8-mini-plus/25650
**Category:** Electronics (ESC, remote, batteries)
**Created:** [January 2, 2026, 8:04pm UTC](https://foil.zone/t/flipsky-vesc-6-8-mini-plus/25650 "2026-01-02T20:04:14Z")
**Posts on this page:** 7
**Page:** 1

<div class="post-metadata">

### Author: ![Antoine987](https://foil.zone/letter_avatar_proxy/v4/letter/a/db5fbb/32.png) [@Antoine987](https://foil.zone/u/Antoine987)
#### Post date: [January 2, 2026, 8:04pm UTC](https://foil.zone/t/flipsky-vesc-6-8-mini-plus/25650/1 "2026-01-02T20:04:14Z")

</div>

Hello, I’m having trouble setting up my new Flipsky VESC 6.8 Mini Plus. I can’t get the same performance as with my VESC 75100 V2 Pro. I don’t have a torque problem, but as soon as I’m foiling, I lose torque when the motor re-enters the water. My settings are the same: 60 amp battery, 130 amp motor current, 155 amp absolute max; FOC settings are also the same. I think this VESC is ultimately less efficient and shows shortcomings in e-foiling; but before ordering another 75100, I’d like some advice. Thank you.

---

<div class="post-metadata">

### Author: ![ludwig\_bre](https://foil.zone/user_avatar/foil.zone/ludwig_bre/32/24870_2.png) [@ludwig\_bre](https://foil.zone/u/ludwig_bre)
#### Post date: [January 2, 2026, 9:36pm UTC](https://foil.zone/t/flipsky-vesc-6-8-mini-plus/25650/2 "2026-01-02T21:36:33Z")

</div>

> [@Antoine987](#):
>
> Flipsky VESC 6.8 Mini Plus.

If it is still the version with “normal” PCB (not Aluminum) and cooling the FETs through their black plastic housing… That’s likely the problem, massive overheating even at low loads

---

<div class="post-metadata">

### Author: ![Antoine987](https://foil.zone/letter_avatar_proxy/v4/letter/a/db5fbb/32.png) [@Antoine987](https://foil.zone/u/Antoine987)
#### Post date: [January 2, 2026, 10:51pm UTC](https://foil.zone/t/flipsky-vesc-6-8-mini-plus/25650/3 "2026-01-02T22:51:27Z")

</div>

> [@ludwig\_bre](#):
>
> If it is still the version with “normal” PCB (not Aluminum) and cooling the FETs through their black plastic housing… That’s likely the problem, massive overheating even at low loads

This is this one :  
[https://flipsky.net/collections/v6-series/products/mini-fsesc6-8-plus](https://flipsky.net/collections/v6-series/products/mini-fsesc6-8-plus)

---

<div class="post-metadata">

### Author: ![seagull\_nz](https://foil.zone/user_avatar/foil.zone/seagull_nz/32/37225_2.png) [@seagull\_nz](https://foil.zone/u/seagull_nz)
#### Post date: [September 22, 2026, 11:33pm UTC](https://foil.zone/t/flipsky-vesc-6-8-mini-plus/25650/4 "2026-09-22T23:33:58Z")

</div>

I see there is now an IP68 version. This could be useful and if exposed to air (and water) it could solve the heating issues? [Flipsky IP68 Waterproof ESC Electronic Speed Controller Mini FSESC6.8](https://flipsky.net/products/flipsky-ip68-waterproof-esc-electronic-speed-controller-mini-fsesc6-8-plus-based-on-vesc6-150a-for-efoil-ejet-boat-esurf)

---

<div class="post-metadata">

### Author: ![Antoine987](https://foil.zone/letter_avatar_proxy/v4/letter/a/db5fbb/32.png) [@Antoine987](https://foil.zone/u/Antoine987)
#### Post date: [September 23, 2026, 2:58am UTC](https://foil.zone/t/flipsky-vesc-6-8-mini-plus/25650/5 "2026-09-23T02:58:31Z")

</div>

Finally, I decided to change to a sequre14200 pro in bl\_heli32, super easy to set up and it works perfectly.

---

<div class="post-metadata">

### Author: ![kyle](https://foil.zone/letter_avatar_proxy/v4/letter/k/848f3c/32.png) [@kyle](https://foil.zone/u/kyle)
#### Post date: [November 3, 2026, 2:04pm UTC](https://foil.zone/t/flipsky-vesc-6-8-mini-plus/25650/6 "2026-11-03T14:04:11Z")

</div>

> [@Antoine987](#):
>
> sequre14200 pro

How do you keep this one cool, as it’s air cooled?

---

<div class="post-metadata">

### Author: ![Antoine987](https://foil.zone/letter_avatar_proxy/v4/letter/a/db5fbb/32.png) [@Antoine987](https://foil.zone/u/Antoine987)
#### Post date: [November 3, 2026, 5:56pm UTC](https://foil.zone/t/flipsky-vesc-6-8-mini-plus/25650/7 "2026-11-03T17:56:24Z")

</div>

Glued on an aluminum plate that cools in the air or in the water that stagnates in my backpack
