# Flipsky VX3 Pro is not waterproof
**URL:** https://foil.zone/t/flipsky-vx3-pro-is-not-waterproof/23559
**Category:** Build, Repair & Mod
**Tags:** remote-control
**Created:** [May 8, 2025, 2:33pm UTC](https://foil.zone/t/flipsky-vx3-pro-is-not-waterproof/23559 "2025-05-08T14:33:53Z")
**Posts on this page:** 20
**Page:** 2
### Author:  [@Jezza](https://foil.zone/u/Jezza)
#### Post date: [July 28, 2025, 11:19am UTC](https://foil.zone/t/flipsky-vx3-pro-is-not-waterproof/23559/21 "2025-07-28T11:19:37Z")
Try connect another battery and see if it comes to life.
Water can get under that display through the side. Thats where I have seen multiple fail.
---
### Author:  [@lishine](https://foil.zone/u/lishine)
#### Post date: [July 28, 2025, 11:33am UTC](https://foil.zone/t/flipsky-vx3-pro-is-not-waterproof/23559/22 "2025-07-28T11:33:27Z")
So I checked battery current. Upon turning on current goes to 600ma. While still holding the button, it is at 800ma.
So clearly there is a short somewhere.
I cut 3 suspicious wires to the display, but nothing changed.
There is really nothing I can do anymore other than cut all the wires to the display and see if it works…
---
### Author:  [@Jezza](https://foil.zone/u/Jezza)
#### Post date: [July 28, 2025, 12:02pm UTC](https://foil.zone/t/flipsky-vx3-pro-is-not-waterproof/23559/23 "2025-07-28T12:02:16Z")
If there’s a short something will be getting hot.
---
### Author:  [@lishine](https://foil.zone/u/lishine)
#### Post date: [July 28, 2025, 12:27pm UTC](https://foil.zone/t/flipsky-vx3-pro-is-not-waterproof/23559/24 "2025-07-28T12:27:47Z")
Right… Thanks, Ok then, I checked, part of that large main epoxied part gets hot like 45c. But then it cannot be repaired. So don’t know how but water got inside there probably. Or they fail prematurely intentionally
---
### Author:  [@Jezza](https://foil.zone/u/Jezza)
#### Post date: [July 28, 2025, 12:55pm UTC](https://foil.zone/t/flipsky-vx3-pro-is-not-waterproof/23559/25 "2025-07-28T12:55:15Z")
Could be a blown regulator which would explain why the whole thing doesnt turn on
---
### Author:  [@mterea](https://foil.zone/u/mterea)
#### Post date: [July 31, 2025, 11:39am UTC](https://foil.zone/t/flipsky-vx3-pro-is-not-waterproof/23559/26 "2025-07-31T11:39:55Z")
Turns out one of my remotes does not have a broken screen. It flashes the logo when starting up, but then goes white instead of the normal screen. Functionality is still fine.
Could I hard reset it? I don’t want to lose the config in case I never get the screen on again as it is working perfectly fine other than the screen issue.
---
### Author:  [@Windigo](https://foil.zone/u/Windigo)
#### Post date: [July 31, 2025, 3:43pm UTC](https://foil.zone/t/flipsky-vx3-pro-is-not-waterproof/23559/27 "2025-07-31T15:43:12Z")
Sounds like the same issues I have with one of mine it’s intermittent sometime it works fine sometimes the screen goes white but it still works. A good whack usually fixes it for a while whack it hard enough to shake things but not enough to break it. It’s likely an intermittent contact on the display. Maybe there’s a way to fix it. I haven’t opened that one yet, I just bought another one.
---
### Author:  [@Jan12](https://foil.zone/u/Jan12)
#### Post date: [August 7, 2025, 6:01pm UTC](https://foil.zone/t/flipsky-vx3-pro-is-not-waterproof/23559/28 "2025-08-07T18:01:08Z")
So, mine just started to act up too (VX3 pro).
Of course when it is the most inconvenient, starting of vacation. 😉
Yesterday it just turned off on the water for no reason and would not turn on again.
So I rinsed it, dried it and tried again. Did not turn on.
Put it on charger and it went into charging, but without display. Still would not turn on.
Put it into a bag with rice overnight and tried charging again this morning and after a while the display came back on.
Now it is working just fine.
So I suspect there is some water getting somewhere it should not.
Has anyone got some ideas that would make this remote survive being used for a few weeks?
Maybe open it up and fill everything with marine grease?
---
### Author:  [@Asufun](https://foil.zone/u/Asufun)
#### Post date: [August 7, 2025, 7:14pm UTC](https://foil.zone/t/flipsky-vx3-pro-is-not-waterproof/23559/29 "2025-08-07T19:14:07Z")
We’ve tested many remotes, and the Flipsky VX3 offers a pretty good user experience. However, I’ve also experienced some water ingress — it’s still working for now. You might want to contact their customer support and check with them.
---
### Author:  [@Jan12](https://foil.zone/u/Jan12)
#### Post date: [August 7, 2025, 7:38pm UTC](https://foil.zone/t/flipsky-vx3-pro-is-not-waterproof/23559/30 "2025-08-07T19:38:07Z")
Yes, I am pretty happy with the way the remote was working.
And I already contacted them. Will be interesting to find out how the customer service is playing out.
But however that goes, it really does not solve my current problem of needing a working remote right now.
---
### Author:  [@windego](https://foil.zone/u/windego)
#### Post date: [August 7, 2025, 9:27pm UTC](https://foil.zone/t/flipsky-vx3-pro-is-not-waterproof/23559/31 "2025-08-07T21:27:40Z")
For your vacation maybe worth getting some desiccant packets and try and dry it out after each session.
---
### Author:  [@Strongarm](https://foil.zone/u/Strongarm)
#### Post date: [August 7, 2025, 10:12pm UTC](https://foil.zone/t/flipsky-vx3-pro-is-not-waterproof/23559/32 "2025-08-07T22:12:08Z")
With the remote completely dry, I would buy a bottle of mineral oil and submerge the remote m in that for a while. The oil should find its way into any crevices and offer some protection.
---
### Author:  [@Jan12](https://foil.zone/u/Jan12)
#### Post date: [August 8, 2025, 7:05am UTC](https://foil.zone/t/flipsky-vx3-pro-is-not-waterproof/23559/33 "2025-08-08T07:05:30Z")
Thank you for the advice.
I actually opened it up yesterday and it really looks well made from the inside. There is no visual clue about what could be the problem.
I will try to get my hands on some mineral oil.
---
### Author:  [@Jan12](https://foil.zone/u/Jan12)
#### Post date: [August 8, 2025, 12:34pm UTC](https://foil.zone/t/flipsky-vx3-pro-is-not-waterproof/23559/34 "2025-08-08T12:34:13Z")
Customer service reply was pretty quick but also useless.
They will not do anything about it, as I did not buy directly from them. Which is not unreasonable.
I will have to contact the vendor (Banggood).
Also OK with me.
But for their “internal after sales service” they want me to make a video of the problem, that is a video of the remote not turning on.
That is so pointless, I have to ask myself, if the people in CS even know what their products do.
---
### Author:  [@Asufun](https://foil.zone/u/Asufun)
#### Post date: [August 12, 2025, 4:02pm UTC](https://foil.zone/t/flipsky-vx3-pro-is-not-waterproof/23559/35 "2025-08-12T16:02:34Z")
I just went to the Flipsky factory yesterday and reported this issue to their engineers, including the video of my own remote.
The explanation from their engineers was vague, but in the later VX5 series products, this issue has been completely eliminated and performance has improved significantly. However, the price is somewhat high.
---
### Author:  [@Jan12](https://foil.zone/u/Jan12)
#### Post date: [August 13, 2025, 3:13pm UTC](https://foil.zone/t/flipsky-vx3-pro-is-not-waterproof/23559/36 "2025-08-13T15:13:19Z")
They sort of claim it to “now” be “fully waterproof” every iteration.
For me more of the same, new day, new issue.
Now the remote is not charging anymore.
When put on the charger, the blue light just starts to pulse rapidly, instead of slow pulses while charging.
Has anyone got an idea, what that error code is supposed to say?
Or what the issue in inductive charging could be?
It is somewhat sad, how they do not even provide a basic manual explaining stuff like that.
---
### Author:  [@Girl\_miami](https://foil.zone/u/Girl_miami)
#### Post date: [August 13, 2025, 10:57pm UTC](https://foil.zone/t/flipsky-vx3-pro-is-not-waterproof/23559/37 "2025-08-13T22:57:00Z")
oh, i have the same remote. you’re lucky, at least your board itself works )))
---
### Author:  [@Joka](https://foil.zone/u/Joka)
#### Post date: [August 14, 2025, 6:59am UTC](https://foil.zone/t/flipsky-vx3-pro-is-not-waterproof/23559/38 "2025-08-14T06:59:27Z")
Lol. I saw the post here and was afraid it could happen, but hoped the majority of remotes was fine. Now it hit me.I used it maybe 20 times. Only in freshwater for about an hour.
It was still working when I turned it off.
I Drilles 2 holes in it and flushed it with 99.9% isopropanol. Next challenge is to get the isopropanol out.
Of course it happens 4 days before my holiday.
Let’s see how flipsky reacts to my email.
---
### Author:  [@gregd72002](https://foil.zone/u/gregd72002)
#### Post date: [September 28, 2025, 11:22am UTC](https://foil.zone/t/flipsky-vx3-pro-is-not-waterproof/23559/39 "2025-09-28T11:22:32Z")
Hello, any updates on this? My VX3 also got now water under the screen. It still works though.
What would be the course of action to get it fixed other than replacing?
---
### Author:  [@poloswindsurf](https://foil.zone/u/poloswindsurf)
#### Post date: [September 28, 2025, 2:53pm UTC](https://foil.zone/t/flipsky-vx3-pro-is-not-waterproof/23559/40 "2025-09-28T14:53:19Z")
Dry it now, don’t wait.
(I have already lost 4 vx3)
. They all had the same problem, their glue does not adhere to the screen protector
Now, as soon as I get a new one, I take it apart and apply epoxy resin to the back of the screen.
I also drill a hole in the bottom of the remote control to run a kite line through, which is sturdier than their poor-quality attachment.
Warranty is only 3 months, good luck with the after sale service…
[Previous page](https://foil.zone/t/flipsky-vx3-pro-is-not-waterproof/23559.md?page=1)
[Next page](https://foil.zone/t/flipsky-vx3-pro-is-not-waterproof/23559.md?page=3)