# Fliteboard prop for Flipsky 65161

**URL:** https://foil.zone/t/fliteboard-prop-for-flipsky-65161/18585
**Category:** Build, Repair & Mod
**Created:** [July 10, 2023, 5:01am UTC](https://foil.zone/t/fliteboard-prop-for-flipsky-65161/18585 "2023-07-10T05:01:42Z")
**Posts on this page:** 1
**Showing post:** 4

<div class="post-metadata">

### Author: ![Foilguy](https://foil.zone/letter_avatar_proxy/v4/letter/f/7cd45c/32.png) [@Foilguy](https://foil.zone/u/Foilguy)
#### Post date: [July 10, 2023, 11:02am UTC](https://foil.zone/t/fliteboard-prop-for-flipsky-65161/18585/4 "2023-07-10T11:02:58Z")

</div>

I found this excellent drawing by @superlefax on one of the other threads and I had three questions

 ![image](https://foil.zone/uploads/default/original/3X/2/3/2302fe25357c915f22bef35cf5381bd4da41b492.jpeg)

1. Can someone confirm that both the 8.1 and the 10.95 shaft pathways should be reamed out to 12mm?

2. If so could I successfully use a hand reamer set to incrementally enlarge the hole as I don’t own a lathe or drill press.

3. I believe the original Flipsky shaft pin is smaller than the receptacle slot in the “base” of the Flite prop. Can anyone suggest a way to use the original pin or is the size difference so insignificant that the slight play wouldn’t matter?

---

_[View the full topic](https://foil.zone/t/fliteboard-prop-for-flipsky-65161/18585)._