# Flitecell battery for DIY build?

**URL:** https://foil.zone/t/flitecell-battery-for-diy-build/17901
**Category:** Build, Repair & Mod
**Created:** [April 3, 2023, 7:47pm UTC](https://foil.zone/t/flitecell-battery-for-diy-build/17901 "2023-04-03T19:47:40Z")
**Posts on this page:** 20
**Page:** 1

<div class="post-metadata">

### Author: ![t-dub-maui](https://foil.zone/user_avatar/foil.zone/t-dub-maui/32/25900_2.png) [@t-dub-maui](https://foil.zone/u/t-dub-maui)
#### Post date: [April 3, 2023, 7:47pm UTC](https://foil.zone/t/flitecell-battery-for-diy-build/17901/1 "2023-04-03T19:47:41Z")

</div>

Hey,

does anyone know if a Flitecell battery could be used for a DIY build without modifications? [Flitecell Sport | eFoil Battery | Fliteboard™ USA](https://fliteboard.com/collections/flitecells-batteries/products/fliteboard-sport-titanium-series-2-2)

Does it have any electronics built in that checks if it is connected to a Fliteboard ESC or does it work like a regular battery?

t-dub

---

<div class="post-metadata">

### Author: ![Strongarm](https://foil.zone/user_avatar/foil.zone/strongarm/32/31776_2.png) [@Strongarm](https://foil.zone/u/Strongarm)
#### Post date: [April 3, 2023, 11:42pm UTC](https://foil.zone/t/flitecell-battery-for-diy-build/17901/2 "2023-04-03T23:42:18Z")

</div>

I’m interested to know this as well

---

<div class="post-metadata">

### Author: ![Strongarm](https://foil.zone/user_avatar/foil.zone/strongarm/32/31776_2.png) [@Strongarm](https://foil.zone/u/Strongarm)
#### Post date: [June 12, 2023, 9:38am UTC](https://foil.zone/t/flitecell-battery-for-diy-build/17901/3 "2023-06-12T09:38:54Z")

</div>

Did you investigate this further?

I’m thinking the newer ones without data connections cables could be used as a DIY pack.

In the manual they say you need to place a “charge magnet” on the battery to enable charging.

And that the system turns on when you shut the lid of the board so another magnet in the lid which turns on the BMS.

My friend just sold his fliteboard so can’t test with his. Assume there is some monitoring stuff sent wirelessly from the BMS to the speed controller to restrict current if the pack gets too hot, or is out of balance, but I think that’s probably a one way data flow, just for monitoring.

---

<div class="post-metadata">

### Author: ![Jezza](https://foil.zone/letter_avatar_proxy/v4/letter/j/dfb087/32.png) [@Jezza](https://foil.zone/u/Jezza)
#### Post date: [June 12, 2023, 11:11am UTC](https://foil.zone/t/flitecell-battery-for-diy-build/17901/4 "2023-06-12T11:11:06Z")

</div>

Interestingly the series 3 batteries are compatible with series 1 boards which have the data cable.

I assume that on all Flitecells the magnet activates the relay on the battery and the dataport is only used to shut the ESC down on series 1 etc.

---

<div class="post-metadata">

### Author: ![t-dub-maui](https://foil.zone/user_avatar/foil.zone/t-dub-maui/32/25900_2.png) [@t-dub-maui](https://foil.zone/u/t-dub-maui)
#### Post date: [June 14, 2023, 8:32am UTC](https://foil.zone/t/flitecell-battery-for-diy-build/17901/5 "2023-06-14T08:32:53Z")

</div>

Unfortunately no updates from my side.  
I think it should work though.  
I was ready to buy a Flitecell Sport, but my local dealer seems to be pretty flaky and never followed up on my inquiry.

Since then I ended up buying an empty Flitecell enclosure from @Kinetisist. I’ll probably try to build my own pack and put it into the enclosure.

---

<div class="post-metadata">

### Author: ![Strongarm](https://foil.zone/user_avatar/foil.zone/strongarm/32/31776_2.png) [@Strongarm](https://foil.zone/u/Strongarm)
#### Post date: [June 14, 2023, 10:02am UTC](https://foil.zone/t/flitecell-battery-for-diy-build/17901/6 "2023-06-14T10:02:52Z")

</div>

Could you see if there is a magnet on the lid somewhere? Running a washer or something on the underside should show its location easy enough. Thanks!

---

<div class="post-metadata">

### Author: ![sharrow](https://foil.zone/letter_avatar_proxy/v4/letter/s/f1d935/32.png) [@sharrow](https://foil.zone/u/sharrow)
#### Post date: [August 31, 2024, 3:22pm UTC](https://foil.zone/t/flitecell-battery-for-diy-build/17901/7 "2024-08-31T15:22:13Z")

</div>

Hello, does some one designed a case dimensions for flitecell Sport that fits in the flite air and can share the step file please?Thanks a lot

---

<div class="post-metadata">

### Author: ![sharrow](https://foil.zone/letter_avatar_proxy/v4/letter/s/f1d935/32.png) [@sharrow](https://foil.zone/u/sharrow)
#### Post date: [September 5, 2024, 8:04pm UTC](https://foil.zone/t/flitecell-battery-for-diy-build/17901/8 "2024-09-05T20:04:35Z")

</div>

Built it from Polycarbonat now, fits good so far.

 ![20240905_210900](https://foil.zone/uploads/default/original/3X/9/5/958a5e776f449658e916c81c042c03f0913de7d2.jpeg)

---

<div class="post-metadata">

### Author: ![Jezza](https://foil.zone/letter_avatar_proxy/v4/letter/j/dfb087/32.png) [@Jezza](https://foil.zone/u/Jezza)
#### Post date: [September 5, 2024, 8:29pm UTC](https://foil.zone/t/flitecell-battery-for-diy-build/17901/9 "2024-09-05T20:29:51Z")

</div>

Did you heat bend it? What did you bond the base on with?

---

<div class="post-metadata">

### Author: ![S\_Roger](https://foil.zone/letter_avatar_proxy/v4/letter/s/9de053/32.png) [@S\_Roger](https://foil.zone/u/S_Roger)
#### Post date: [September 5, 2024, 10:05pm UTC](https://foil.zone/t/flitecell-battery-for-diy-build/17901/10 "2024-09-05T22:05:15Z")

</div>

That looks nice. Are planning to try and use the existing latch system in the board to hold the battery in place?

---

<div class="post-metadata">

### Author: ![sharrow](https://foil.zone/letter_avatar_proxy/v4/letter/s/f1d935/32.png) [@sharrow](https://foil.zone/u/sharrow)
#### Post date: [September 6, 2024, 7:45pm UTC](https://foil.zone/t/flitecell-battery-for-diy-build/17901/11 "2024-09-06T19:45:26Z")

</div>

I heated it 45sec with the hair straightener from my wife and then bended the polycarbonat, works good because you can heat both sides at the bendingpoints. And get a pair of hot ears for free from her at the point she recognized that. 😂  
I welded this frame with the hot gun to the bottom, because I do not trust any glue. I will also weld the lid. For this purpose you can buy 4mm polycarbonat sticks extra for welding.  
Yes I will use the snaplock. Will put 14s LG pouch cells 37ah inside. The original flitecell sport only got 30ah

---

<div class="post-metadata">

### Author: ![Kian](https://foil.zone/user_avatar/foil.zone/kian/32/12789_2.png) [@Kian](https://foil.zone/u/Kian)
#### Post date: [September 6, 2024, 8:08pm UTC](https://foil.zone/t/flitecell-battery-for-diy-build/17901/12 "2024-09-06T20:08:50Z")

</div>

15 LG pouches will fit too.  
3 stacks of 5.

---

<div class="post-metadata">

### Author: ![sharrow](https://foil.zone/letter_avatar_proxy/v4/letter/s/f1d935/32.png) [@sharrow](https://foil.zone/u/sharrow)
#### Post date: [September 6, 2024, 8:18pm UTC](https://foil.zone/t/flitecell-battery-for-diy-build/17901/13 "2024-09-06T20:18:28Z")

</div>

There are different sizes I ordered the 8x137x265mm. The fliteair got less space then other fliteboard models. 15s would be possible with this type of cells one stack 8 and one 7 and on top the bms.

---

<div class="post-metadata">

### Author: ![S\_Roger](https://foil.zone/letter_avatar_proxy/v4/letter/s/9de053/32.png) [@S\_Roger](https://foil.zone/u/S_Roger)
#### Post date: [September 6, 2024, 8:41pm UTC](https://foil.zone/t/flitecell-battery-for-diy-build/17901/14 "2024-09-06T20:41:58Z")

</div>

Interesting. I also have a new Flite Air board with the smaller battery space and will also be putting a stack of LG pouch cells (in part inspired by @Kian). The cells I bought are from a volvo hybrid, 32AH and 150mmx200mm. Unfortunately cannot fit 2 stacks in the smaller Flite air, so will do a single 10S stack.

---

<div class="post-metadata">

### Author: ![sharrow](https://foil.zone/letter_avatar_proxy/v4/letter/s/f1d935/32.png) [@sharrow](https://foil.zone/u/sharrow)
#### Post date: [September 6, 2024, 8:58pm UTC](https://foil.zone/t/flitecell-battery-for-diy-build/17901/15 "2024-09-06T20:58:06Z")

</div>

I use nearly every millimeter of the space the fliteair got. Next 2 weeks the cells should arrive, hope everything will fit.

---

<div class="post-metadata">

### Author: ![Kian](https://foil.zone/user_avatar/foil.zone/kian/32/12789_2.png) [@Kian](https://foil.zone/u/Kian)
#### Post date: [September 7, 2024, 5:38am UTC](https://foil.zone/t/flitecell-battery-for-diy-build/17901/16 "2024-09-07T05:38:50Z")

</div>

Just a small note.

A friend of us is using the pouches too, however his did start swelling.

Our batteries have not shown any swelling so far, even though we’ve used them a lot.

In our next pouches battery build we are going to “compress” them between some aluminum plates.

---

<div class="post-metadata">

### Author: ![sharrow](https://foil.zone/letter_avatar_proxy/v4/letter/s/f1d935/32.png) [@sharrow](https://foil.zone/u/sharrow)
#### Post date: [September 7, 2024, 6:54am UTC](https://foil.zone/t/flitecell-battery-for-diy-build/17901/17 "2024-09-07T06:54:58Z")

</div>

Always keep an eye on that, therefor Polycarbonat is good. If swelling, replace the cells directly. Is he using LG too?

---

<div class="post-metadata">

### Author: ![Kian](https://foil.zone/user_avatar/foil.zone/kian/32/12789_2.png) [@Kian](https://foil.zone/u/Kian)
#### Post date: [September 7, 2024, 7:07am UTC](https://foil.zone/t/flitecell-battery-for-diy-build/17901/18 "2024-09-07T07:07:04Z")

</div>

Yes. Same pouches as I am using.  
LG Chem E63B

---

<div class="post-metadata">

### Author: ![sharrow](https://foil.zone/letter_avatar_proxy/v4/letter/s/f1d935/32.png) [@sharrow](https://foil.zone/u/sharrow)
#### Post date: [September 7, 2024, 8:06am UTC](https://foil.zone/t/flitecell-battery-for-diy-build/17901/19 "2024-09-07T08:06:09Z")

</div>

Maybe his charging process is wrong or he did not get grade A batterys from our chinese friends. There are a lot of used or grade b cells on the market they sell for grade a ones. No chance to avoid that even buying from the same store is not save 100%.😭

---

<div class="post-metadata">

### Author: ![sharrow](https://foil.zone/letter_avatar_proxy/v4/letter/s/f1d935/32.png) [@sharrow](https://foil.zone/u/sharrow)
#### Post date: [January 17, 2025, 9:57pm UTC](https://foil.zone/t/flitecell-battery-for-diy-build/17901/20 "2025-01-17T21:57:18Z")

</div>

Here are some cheap, waterproof and easy to build in degassing valves for diy batteries. Good to have them build in, if something went wrong.

 ![Screenshot_20250117_225630_AliExpress](https://foil.zone/uploads/default/original/3X/5/6/568040cfa3f12f88fcbf24856fc1702a16d888d0.jpeg)

[https://a.aliexpress.com/\_Ezq2ujQ](https://a.aliexpress.com/_Ezq2ujQ)

[Next page](https://foil.zone/t/flitecell-battery-for-diy-build/17901.md?page=2)
