# Flying Nemo from North Queensland Australia
**URL:** https://foil.zone/t/flying-nemo-from-north-queensland-australia/1697
**Category:** Builds
**Created:** [May 8, 2018, 9:01pm UTC](https://foil.zone/t/flying-nemo-from-north-queensland-australia/1697 "2018-05-08T21:01:46Z")
**Posts on this page:** 20
**Page:** 1
### Author:  [@rogjalon](https://foil.zone/u/rogjalon)
#### Post date: [May 8, 2018, 9:01pm UTC](https://foil.zone/t/flying-nemo-from-north-queensland-australia/1697/1 "2018-05-08T21:01:46Z")
This is another @pacificmeister build thruster mounted on a Naish Hover Hydrofoil with a modified windsurfer board.
SSS 56104 motor
Neugart PLE40 gearbox
Seaking 130A ESC (Water cooled)!
4 X Turnigy 12000mah batteries
   
---
### Author:  [@Hiorth](https://foil.zone/u/Hiorth)
#### Post date: [May 8, 2018, 9:23pm UTC](https://foil.zone/t/flying-nemo-from-north-queensland-australia/1697/2 "2018-05-08T21:23:34Z")
Congrats, Awesome build! Love the colours!
---
### Author:  [@rogjalon](https://foil.zone/u/rogjalon)
#### Post date: [May 8, 2018, 9:28pm UTC](https://foil.zone/t/flying-nemo-from-north-queensland-australia/1697/3 "2018-05-08T21:28:17Z")
Thankyou @Hiorth The idea to modify a windsurfer board was inspired by your first build.
---
### Author:  [@MaxMaker](https://foil.zone/u/MaxMaker)
#### Post date: [May 8, 2018, 10:05pm UTC](https://foil.zone/t/flying-nemo-from-north-queensland-australia/1697/4 "2018-05-08T22:05:10Z")
Very nice! The large electronics bay is the way to go in my opinion.
---
### Author:  [@rogjalon](https://foil.zone/u/rogjalon)
#### Post date: [May 8, 2018, 10:18pm UTC](https://foil.zone/t/flying-nemo-from-north-queensland-australia/1697/5 "2018-05-08T22:18:34Z")
Thankyou @MaxMaker The electronics bay is 600mm X 220mm X 80mm deep. I needed it large to accommodate the 4 batteries.
---
### Author:  [@Filip](https://foil.zone/u/Filip)
#### Post date: [May 9, 2018, 1:53am UTC](https://foil.zone/t/flying-nemo-from-north-queensland-australia/1697/6 "2018-05-09T01:53:14Z")
Looks good!
I’m building my board at the moment, how important is it to have an indent for the box? I’m considering just strapping it to the top but I have to choose soon since I’m fiber glassing it.
---
### Author:  [@rogjalon](https://foil.zone/u/rogjalon)
#### Post date: [May 9, 2018, 2:22am UTC](https://foil.zone/t/flying-nemo-from-north-queensland-australia/1697/7 "2018-05-09T02:22:20Z")
Thankyou @Filip. I guess it’s a personal choice. I like the look of the board having a flush top and I guess it eliminates any chance of an external box getting in the way. A lot more work though.
Good luck with your build
---
### Author:  [@cwazy1](https://foil.zone/u/cwazy1)
#### Post date: [May 9, 2018, 6:46am UTC](https://foil.zone/t/flying-nemo-from-north-queensland-australia/1697/8 "2018-05-09T06:46:22Z")
how does your lid seal to the electronics box? looks like there are 20 screws? isn’t that a huge pain when you need to charge batteries?
---
### Author:  [@morgansteven1970](https://foil.zone/u/morgansteven1970)
#### Post date: [May 9, 2018, 7:07am UTC](https://foil.zone/t/flying-nemo-from-north-queensland-australia/1697/9 "2018-05-09T07:07:06Z")
rogjalon looking very nice setup.
Looks like you got a rubber seal for the lid, did you make yourself…what type of rubber is it?
have you tested this in water?
I got a similar lid with lots of bolts and a rubber seal but still getting water into the compartment? I need re think my idea?
---
### Author:  [@rogjalon](https://foil.zone/u/rogjalon)
#### Post date: [May 9, 2018, 7:29am UTC](https://foil.zone/t/flying-nemo-from-north-queensland-australia/1697/10 "2018-05-09T07:29:30Z")
Hi @cwazy1. There is 28 screws in this compartment. I use a battery operated drill to change them quickly it only takes a few minutes. I did look at comercial hatches but there wasn’t anything suitable available.
---
### Author:  [@rogjalon](https://foil.zone/u/rogjalon)
#### Post date: [May 9, 2018, 7:35am UTC](https://foil.zone/t/flying-nemo-from-north-queensland-australia/1697/11 "2018-05-09T07:35:25Z")
Thankyou @morgansteven1970
The seal in the compartment lid is a EPDM sponge seal 3mm x 20mm. The joins are glued together with super glue. This seal compresses very well. The lid is made from 6mm marine grade plywood. I have tested it by pushing it under water for a few minutes and it didn’t leak at all. The bolts are only 60mm apart, so I think this helps too.
---
### Author:  [@philgib](https://foil.zone/u/philgib)
#### Post date: [May 9, 2018, 9:04am UTC](https://foil.zone/t/flying-nemo-from-north-queensland-australia/1697/12 "2018-05-09T09:04:27Z")
Love it ! Question : the batteries and the ESC look to be in the same box, right ? Maybe some temp fireproof separation to add between the ESC and the batteries for safety issue and money issue if the ESC ever wants to catch on fire ?
---
### Author:  [@rogjalon](https://foil.zone/u/rogjalon)
#### Post date: [May 9, 2018, 9:10am UTC](https://foil.zone/t/flying-nemo-from-north-queensland-australia/1697/13 "2018-05-09T09:10:06Z")
Thankyou @philgib that’s is a good idea to have some separation from the batteries.
---
### Author:  [@g.gregory8](https://foil.zone/u/g.gregory8)
#### Post date: [May 9, 2018, 9:30am UTC](https://foil.zone/t/flying-nemo-from-north-queensland-australia/1697/14 "2018-05-09T09:30:31Z")
Awesome looking setup mate! How have you lined the inside of the battery component? Is it all fibreglassed? It’s the one job I have to
---
### Author:  [@rogjalon](https://foil.zone/u/rogjalon)
#### Post date: [May 9, 2018, 9:43am UTC](https://foil.zone/t/flying-nemo-from-north-queensland-australia/1697/15 "2018-05-09T09:43:48Z")
Thank you @g.gregory8 Yes I used 4 layers of epoxy glass.
---
### Author:  [@rogjalon](https://foil.zone/u/rogjalon)
#### Post date: [May 15, 2018, 9:36am UTC](https://foil.zone/t/flying-nemo-from-north-queensland-australia/1697/16 "2018-05-15T09:36:10Z")
I used my efoil for the first time yesterday. All went well for the first ten minutes.
But then, my duct came unscrewed from the seal housing, hit my prop and pull the shaft out of the coupling. Bugger, I knew I should have secured it better. The end result is a complete rebuild of the motor pod.
---
### Author:  [@Filip](https://foil.zone/u/Filip)
#### Post date: [May 15, 2018, 10:58am UTC](https://foil.zone/t/flying-nemo-from-north-queensland-australia/1697/17 "2018-05-15T10:58:20Z")
How do people prevent this? screwing it on really tight? I suppose you could also glue it.
---
### Author:  [@rogjalon](https://foil.zone/u/rogjalon)
#### Post date: [May 15, 2018, 11:34am UTC](https://foil.zone/t/flying-nemo-from-north-queensland-australia/1697/18 "2018-05-15T11:34:58Z")
I had it really tight. To tight to undo by hand. However the water pressure against the struts was enough to undo it. I would highly recommend either screwing it or glueing it in place.
---
### Author:  [@MaxMaker](https://foil.zone/u/MaxMaker)
#### Post date: [May 15, 2018, 11:59am UTC](https://foil.zone/t/flying-nemo-from-north-queensland-australia/1697/19 "2018-05-15T11:59:03Z")
Add a grub screw or epoxy it in.
---
### Author:  [@Hiorth](https://foil.zone/u/Hiorth)
#### Post date: [May 15, 2018, 12:55pm UTC](https://foil.zone/t/flying-nemo-from-north-queensland-australia/1697/20 "2018-05-15T12:55:24Z")
> [@rogjalon](#):
>
> I had it really tight. To tight to undo by hand. However the water pressure against the struts was enough to undo it. I would highly recommend either screwing it or glueing it in place.
IF you use silicone as glue on the 3d printed threads, you might be able to get it off again, given that you dont use too much.
[Next page](https://foil.zone/t/flying-nemo-from-north-queensland-australia/1697.md?page=2)