# Foil Assist with Flipsky 65111 for Axis Mast (and Flipsky 75100 ESC)

**URL:** https://foil.zone/t/foil-assist-with-flipsky-65111-for-axis-mast-and-flipsky-75100-esc/17041
**Category:** Build, Repair & Mod
**Created:** [November 10, 2022, 2:50pm UTC](https://foil.zone/t/foil-assist-with-flipsky-65111-for-axis-mast-and-flipsky-75100-esc/17041 "2022-11-10T14:50:37Z")
**Posts on this page:** 1
**Showing post:** 28

<div class="post-metadata">

### Author: ![SoEFoil](https://foil.zone/user_avatar/foil.zone/soefoil/32/55_2.png) [@SoEFoil](https://foil.zone/u/SoEFoil)
#### Post date: [December 27, 2022, 11:12pm UTC](https://foil.zone/t/foil-assist-with-flipsky-65111-for-axis-mast-and-flipsky-75100-esc/17041/28 "2022-12-27T23:12:26Z")

</div>

> [@SurfingElectronics](#):
>
> how to set up the remote control such that if I accelerate fully, it’ll do it but slowly?

App Settings / VESC Remote / Throttle Curve: two parameters in efoil/surf mode (XX no reverse):

- 1- “Throttle expo” field allows to create a soft start (eg not to break a 3D printed prop during startup), the more negative the number the smoother the start [typ -20].
- 2- “Throttle expo mode” accentuates the smoothing effect: Exponential \> Polynomial \> Natural.

Everything is explained here for an Esk8 which has a (Throttle expo) brake feature not present for efoils:

[![](https://img.youtube.com/vi/HfjgwhYi8IE/maxresdefault.jpg "Adjust Throttle Curve On Vesc Tool - DIY Electric Skateboard") ](https://www.youtube.com/watch?v=HfjgwhYi8IE)

---

_[View the full topic](https://foil.zone/t/foil-assist-with-flipsky-65111-for-axis-mast-and-flipsky-75100-esc/17041)._