# Foil Drive Assist, DIY

**URL:** https://foil.zone/t/foil-drive-assist-diy/12927
**Category:** Build, Repair & Mod
**Created:** [June 21, 2021, 3:51am UTC](https://foil.zone/t/foil-drive-assist-diy/12927 "2021-06-21T03:51:30Z")
**Posts on this page:** 1
**Showing post:** 886

<div class="post-metadata">

### Author: ![rttn](https://foil.zone/letter_avatar_proxy/v4/letter/r/bcef8e/32.png) [@rttn](https://foil.zone/u/rttn)
#### Post date: [September 20, 2023, 10:55pm UTC](https://foil.zone/t/foil-drive-assist-diy/12927/886 "2023-09-20T22:55:33Z")

</div>

I printed the stand that attaches to the board using 3M double sided tape. The box is placed in it and secured with a Velcro strap.

 ![Screenshot_20230921-015050_Gallery](https://foil.zone/uploads/default/original/3X/1/9/19f09eb14e66759a93cabbd9b190330c807feedc.jpeg)  
I used to apply 3M Dual Lock SJ3550CF tape directly to the box and it was a headache - the box kept coming off.

---

_[View the full topic](https://foil.zone/t/foil-drive-assist-diy/12927)._