# Fr 2019 motor system
**URL:** https://foil.zone/t/fr-2019-motor-system/3762
**Category:** Propulsion System (Motor, Gears)
**Created:** [February 8, 2019, 12:39pm UTC](https://foil.zone/t/fr-2019-motor-system/3762 "2019-02-08T12:39:48Z")
**Posts on this page:** 20
**Page:** 25
### Author:  [@Marc87](https://foil.zone/u/Marc87)
#### Post date: [April 2, 2020, 6:06pm UTC](https://foil.zone/t/fr-2019-motor-system/3762/486 "2020-04-02T18:06:15Z")
One which is way to thin: 4/3mm. Hat, gloves and shoes. The cold blow to the head was the worst when wiping out š
---
### Author:  [@Flying\_Rodeo](https://foil.zone/u/Flying_Rodeo)
#### Post date: [April 4, 2020, 1:29pm UTC](https://foil.zone/t/fr-2019-motor-system/3762/487 "2020-04-04T13:29:58Z")
Hello,
if you are still intrested for Propeller for Flipsky motor feel free to write me a private message with full name, shipping adress and phone number for DHL purpose and we will send you Proforma Invoice.
In privat message please send us also wich color you want:
- Black,
- blue,
- gold,
- red.
Delivery will be around 20.April.
---
### Author:  [@JetboardCologne](https://foil.zone/u/JetboardCologne)
#### Post date: [April 4, 2020, 5:21pm UTC](https://foil.zone/t/fr-2019-motor-system/3762/488 "2020-04-04T17:21:21Z")
Itās doneš
Best regards Frank
---
### Author:  [@cim96dm7](https://foil.zone/u/cim96dm7)
#### Post date: [April 4, 2020, 6:30pm UTC](https://foil.zone/t/fr-2019-motor-system/3762/489 "2020-04-04T18:30:14Z")
PM from me as well David!
Looking forward to the 20:th!
Best regards Mattias
---
### Author:  [@MAC](https://foil.zone/u/MAC)
#### Post date: [April 4, 2020, 6:56pm UTC](https://foil.zone/t/fr-2019-motor-system/3762/490 "2020-04-04T18:56:34Z")
PM from Me too. DONE.
---
### Author:  [@guldsteen](https://foil.zone/u/guldsteen)
#### Post date: [April 4, 2020, 7:08pm UTC](https://foil.zone/t/fr-2019-motor-system/3762/491 "2020-04-04T19:08:22Z")
PM from me as Well. Looking very much forward to it!! @Flying_Rodeo
---
### Author:  [@Felixfoiler](https://foil.zone/u/Felixfoiler)
#### Post date: [April 5, 2020, 8:20am UTC](https://foil.zone/t/fr-2019-motor-system/3762/492 "2020-04-05T08:20:35Z")
Sent you PM. Very thrilled to get one š
---
### Author:  [@Jezza](https://foil.zone/u/Jezza)
#### Post date: [April 5, 2020, 9:20am UTC](https://foil.zone/t/fr-2019-motor-system/3762/493 "2020-04-05T09:20:21Z")
Sent a pmā¦
---
### Author:  [@Beninspain](https://foil.zone/u/Beninspain)
#### Post date: [April 5, 2020, 12:29pm UTC](https://foil.zone/t/fr-2019-motor-system/3762/494 "2020-04-05T12:29:00Z")
PM sent from Me cant wait.
---
### Author:  [@cristophe](https://foil.zone/u/cristophe)
#### Post date: [April 6, 2020, 6:13pm UTC](https://foil.zone/t/fr-2019-motor-system/3762/496 "2020-04-06T18:13:27Z")
Pm from me. Thanks a lot, David.
---
### Author:  [@guldsteen](https://foil.zone/u/guldsteen)
#### Post date: [April 9, 2020, 6:39am UTC](https://foil.zone/t/fr-2019-motor-system/3762/497 "2020-04-09T06:39:19Z")
Just to be sure - is it this motor the FR prop fits on? Ć12 shaft with M8 thread:
[https://www.gd-hgl.com/products/brushless-sensored-motor-amphibious-fully-waterproof-motor-65161-120kv-6000w-for-efoil-ejet-boards-ebike?variant=31129334317133](https://www.gd-hgl.com/products/brushless-sensored-motor-amphibious-fully-waterproof-motor-65161-120kv-6000w-for-efoil-ejet-boards-ebike?variant=31129334317133)
---
### Author:  [@Felixfoiler](https://foil.zone/u/Felixfoiler)
#### Post date: [April 9, 2020, 7:17am UTC](https://foil.zone/t/fr-2019-motor-system/3762/498 "2020-04-09T07:17:30Z")
Yes it fits onto this motor
---
### Author:  [@Adfrank](https://foil.zone/u/Adfrank)
#### Post date: [April 9, 2020, 3:48pm UTC](https://foil.zone/t/fr-2019-motor-system/3762/499 "2020-04-09T15:48:22Z")
Any difference between the HGLTECH and Flipsky? Earlier in the thread someone warned against them but if Flipsky isnāt offering a threaded shaft then this might be the best option.
---
### Author:  [@Jezza](https://foil.zone/u/Jezza)
#### Post date: [April 9, 2020, 4:13pm UTC](https://foil.zone/t/fr-2019-motor-system/3762/500 "2020-04-09T16:13:32Z")
No difference. It was just a shipping issue which canāt be blamed on the supplier. Just a case of being unlucky.
---
### Author:  [@Felixfoiler](https://foil.zone/u/Felixfoiler)
#### Post date: [April 9, 2020, 4:21pm UTC](https://foil.zone/t/fr-2019-motor-system/3762/501 "2020-04-09T16:21:48Z")
yes, hglrc isnt a bad company we both just had bad luck
---
### Author:  [@Adfrank](https://foil.zone/u/Adfrank)
#### Post date: [April 9, 2020, 4:39pm UTC](https://foil.zone/t/fr-2019-motor-system/3762/502 "2020-04-09T16:39:05Z")
Thanks @Jezza and @Felixfoiler.
Solves it then to go through HGLTECH for compatibility with the FR prop.
---
### Author:  [@YAHEF](https://foil.zone/u/YAHEF)
#### Post date: [April 9, 2020, 5:18pm UTC](https://foil.zone/t/fr-2019-motor-system/3762/503 "2020-04-09T17:18:00Z")
Seams like Flipsky will start shipping the threaded one mid April
> **[Brushless Motor Sensorless Amphibious Fully Waterproof motor 65161 120KV |...](https://flipsky.net/products/brushless-sensored-motor-amphibious-fully-waterproof-motor-65161-120kv-6000w-for-efoil-ejet-boards-ebike)**
>
> Product Spec: Voltage range: 6-20S (25.2-84V) Max Spin Speed(RPM): 16380 KV(RPM/V): 120KV/100KV Max Power:6000W,rated power 3000W Peak current: 200A The number of pole:Ā 6(please write 3 pairs when do setup) Max torque at 60%:9NM Demension:...
---
### Author:  [@Adfrank](https://foil.zone/u/Adfrank)
#### Post date: [April 9, 2020, 5:27pm UTC](https://foil.zone/t/fr-2019-motor-system/3762/504 "2020-04-09T17:27:07Z")
Thanks. I didnāt realize the 12mm shaft was threaded.
---
### Author:  [@SoEFoil](https://foil.zone/u/SoEFoil)
#### Post date: [April 9, 2020, 6:56pm UTC](https://foil.zone/t/fr-2019-motor-system/3762/505 "2020-04-09T18:56:11Z")
> [@YAHEF](#):
>
> Seams like Flipsky will start shipping the threaded one mid April
I am not so sure. I agree on availabilities (10mm today 12mm mid April) but IMHO, both shaft diameters seem unthreaded. So, according to their website (donāt know by email) the only possibility today to mount a FR propeller is to order a motor with threaded shaft from HGLTECH.
---
### Author:  [@YAHEF](https://foil.zone/u/YAHEF)
#### Post date: [April 9, 2020, 7:41pm UTC](https://foil.zone/t/fr-2019-motor-system/3762/506 "2020-04-09T19:41:58Z")
Iām not 100% sure either but looking at the pictures at their website, booth 100kv and 120kv are illustrerad with threads.
@Adfrank, best way to find out is perhaps to drop Flipsky a mail
[Previous page](https://foil.zone/t/fr-2019-motor-system/3762.md?page=24)
[Next page](https://foil.zone/t/fr-2019-motor-system/3762.md?page=26)