# Fr 2019 motor system

**URL:** https://foil.zone/t/fr-2019-motor-system/3762
**Category:** Propulsion System (Motor, Gears)
**Created:** [February 8, 2019, 12:39pm UTC](https://foil.zone/t/fr-2019-motor-system/3762 "2019-02-08T12:39:48Z")
**Posts on this page:** 1
**Showing post:** 541

<div class="post-metadata">

### Author: ![michion](https://foil.zone/letter_avatar_proxy/v4/letter/m/ecccb3/32.png) [@michion](https://foil.zone/u/michion)
#### Post date: [April 30, 2020, 3:09am UTC](https://foil.zone/t/fr-2019-motor-system/3762/541 "2020-04-30T03:09:57Z")

</div>

All good. This one should fit either of the flipsky motors. Sounds like you have a mashup of both motors above. I didnt know about the one with the wider cone.

Plus I removed the space for the extra lip seal on the outside as the motor already has two, as I found out. Still has space for the 51101 thrust washer if you choose to use it.

> **[Flipsky65161Hub.stl](https://drive.google.com/file/d/13Li8w_g9xb6FX-2hFrpB_rAjSM3RIj-x/view?usp=drive_open)**
>
> Google Drive file.

> **[Flipsky65161Duct.stl](https://drive.google.com/file/d/1ich77uQDcWIcMaERl_P1iP9VfLTd5KIA/view?usp=drive_open)**
>
> Google Drive file.

---

_[View the full topic](https://foil.zone/t/fr-2019-motor-system/3762)._