# Fr 2019 motor system

**URL:** https://foil.zone/t/fr-2019-motor-system/3762
**Category:** Propulsion System (Motor, Gears)
**Created:** [February 8, 2019, 12:39pm UTC](https://foil.zone/t/fr-2019-motor-system/3762 "2019-02-08T12:39:48Z")
**Posts on this page:** 1
**Showing post:** 682

<div class="post-metadata">

### Author: ![nice2cu](https://foil.zone/user_avatar/foil.zone/nice2cu/32/17766_2.png) [@nice2cu](https://foil.zone/u/nice2cu)
#### Post date: [October 7, 2020, 7:07pm UTC](https://foil.zone/t/fr-2019-motor-system/3762/682 "2020-10-07T19:07:11Z")

</div>

I am driving since some weeks also with a cone behind my FR Propeller but at moment without the blades. I got 10-15 minutes more time for foiling.  
Next step is to print a cone with the blades.

I mount it total easy, the FR Propeller is mounted with a M8 screw. Behind that you gave around 6mm free thread. In my 3D printed cone you can easy put screw inside.

> **[Slow Build Austria / Salzburg](https://foil.zone/t/slow-build-austria-salzburg/5966/196)**
>
> after my son broken my duct, I decided to make some modifications. So, I will ride now without and hope on the weekend I will be reach \>40 km/h 😜

---

_[View the full topic](https://foil.zone/t/fr-2019-motor-system/3762)._