# Frankenstein build (Fliteboard, Gong V2 mast, Flipsky 75200 VESC and in my case a Tritonfoils X1 monofoil)

**URL:** https://foil.zone/t/frankenstein-build-fliteboard-gong-v2-mast-flipsky-75200-vesc-and-in-my-case-a-tritonfoils-x1-monofoil/19516
**Category:** Builds
**Created:** [November 1, 2023, 5:45pm UTC](https://foil.zone/t/frankenstein-build-fliteboard-gong-v2-mast-flipsky-75200-vesc-and-in-my-case-a-tritonfoils-x1-monofoil/19516 "2023-11-01T17:45:36Z")
**Posts on this page:** 3
**Page:** 6

<div class="post-metadata">

### Author: ![Franklin](https://foil.zone/letter_avatar_proxy/v4/letter/f/3e96dc/32.png) [@Franklin](https://foil.zone/u/Franklin)
#### Post date: [June 28, 2025, 12:26pm UTC](https://foil.zone/t/frankenstein-build-fliteboard-gong-v2-mast-flipsky-75200-vesc-and-in-my-case-a-tritonfoils-x1-monofoil/19516/101 "2025-06-28T12:26:15Z")

</div>

Hi Kian do you have one of these adapter/plates left? Im not sure if one of my vescs will fit. (makerbase 84100HP for my 6384build & 84200HP for my 65161 build)  
I live close so a testfit is possible if you have one. Groetjes!

---

<div class="post-metadata">

### Author: ![Kian](https://foil.zone/user_avatar/foil.zone/kian/32/12789_2.png) [@Kian](https://foil.zone/u/Kian)
#### Post date: [June 29, 2025, 4:07pm UTC](https://foil.zone/t/frankenstein-build-fliteboard-gong-v2-mast-flipsky-75200-vesc-and-in-my-case-a-tritonfoils-x1-monofoil/19516/102 "2025-06-29T16:07:48Z")

</div>

Sorry, they’re all sold. If there’s enough interest, we might have more made.

---

<div class="post-metadata">

### Author: ![iasen\_vak](https://foil.zone/user_avatar/foil.zone/iasen_vak/32/28745_2.png) [@iasen\_vak](https://foil.zone/u/iasen_vak)
#### Post date: [August 14, 2025, 12:59pm UTC](https://foil.zone/t/frankenstein-build-fliteboard-gong-v2-mast-flipsky-75200-vesc-and-in-my-case-a-tritonfoils-x1-monofoil/19516/103 "2025-08-14T12:59:57Z")

</div>

Hi,  
I’m about to do the same. I’m waiting for the board from Flite.  
Can you share the STL or STEP of the box, lid and gasket that are on the aluminum plate?

[Previous page](https://foil.zone/t/frankenstein-build-fliteboard-gong-v2-mast-flipsky-75200-vesc-and-in-my-case-a-tritonfoils-x1-monofoil/19516.md?page=5)