FS: HGLTech / Flipsky Motor ESC Kit (Bay Area, California)

Buy & Sell
1

Selling my HGLTech motor kit for e-foils. I’m moving to Hawai’i so need to clear unfinished projects.

HGLTech Flipsky 65162 Motor
Walrus 300a water-cooled ESC
7 Inch prop
WH4 waterproof remote

New, still in box. Imported in March. Been in my room since.

IMG_20210616_104424
IMG_20210616_1044242112×4608 2.77 MB
IMG_20210616_104403
IMG_20210616_1044034608×2112 3.03 MB
IMG_20210616_104412
IMG_20210616_1044122112×4608 2.28 MB
IMG_20210616_104418
IMG_20210616_1044182112×4608 2.3 MB
IMG_20210616_104431
IMG_20210616_1044312112×4608 3.11 MB
IMG_20210616_104444
IMG_20210616_1044444608×2112 2.8 MB

$700 obo. Prefer local pick up but will ship at buyers expense.

Link here: https://firduo.com/products/electric-hydrofoil-kits-65162-motor-7inch-propeller-300a-esc-wh4-remote-controller?variant=32981039808589

2

hey
ave you sold this?

3

Nope Still Available.

4

The propeller is not suitable for e-foil, you can’t put a quality propeller on a splined shaft. Only a very low selling price would compensate for that.

5

With a a hole drilled into the shaft for a pin the Fliteboard prop will fit fine (the splines have a 11mm diameter with is the same as the prop).
If you wanted to use the FR prop then all you need to do is drill a hole for a pin and then take off 5mm of the spline. This took me 10 minutes…

6

Price drop. $650 obo

8

This is not true. This prop works great with this motor. Flipsky 100kv flier esc Holland build

9

SOLD on ebay. Thanks!